Our Brands

Development Boards

72 - 86
80 81 82 83 84 85 86 87 88 89 90 91 92 93 94
88 - 102
Newest Items First
15 Per Page
MOT-L6201 L6201, Single 1 Amp 48 Volt DC Motor Driver for 5v microcontrollers
US$15.33
This motor driver module can handle up to 48 volts and handle a maximum of 1 amp of current. Based on the L6201, a full bridge drive controller board allowing for backwards and forwards motion which is similar to the L298N.
In stock
+ −
Add to wish list
WIFI-NODEMCU NodeMCU ESP-12E Microcontroller with CP2102 Communication Chip
US$8.39
This is a microcontroller that has the CP2102 USB to UART chip for easy programming capabilities, the user only needs to install Arduino IDE to use this device.
In stock
+ −
Add to wish list
DC 10-60VDC PWM Motor Speed Controller With Housing - 10A
US$19.95
This is an enclosed, ready to go, PWM speed controller. It is capable of driving a DC motor ranging from 10 to 60 Volt DC at a maximum amperage of 10A. Four mounting holes make this unit easily mounted on a wall or board. A detachable four pin screw-in terminal block makes powering the unit and connecting the motor a fairly easy job.
In stock
+ −
Add to wish list
MOD-FT2232D FTDI FT2232D USB to UART JTAG programmer
US$21.95
The is the next step to the FTDI FT232RL, offering JTAG options for hobbyist who need an affordable option to work with their ST Microcontrollers.
Delivery within 2-3 weeks
+ −
Add to wish list
MOD-FT4232HL FTDI FT4232HL USB to RS232/RS485/RS422/UART/JTAG/SPI and I2C
US$32.98
The FTDI chip that allows your microcontroller to communicate to your PC. Commonly used for Arduino Nano series microcontrollers or standalone Atmel and Pic Microcontrollers.
In stock
+ −
Add to wish list
PIM280 Touch pHAT
US$11.35
Touch pHAT has six capacitive touch buttons, each with a bright white LED, designed to be completely agnostic about what they're used for. You can even use a dry erase pen to write on the pads to label their function. It uses the CAP1166 capacitive touch and LED driver chip. The LEDs have been under-mounted and shine through exposed sections of the PCB to give a pleasing yellow-green glow and a completely smooth top surface! Use Touch pHAT as a controller for your robot, a controller for your Mote lights, a tiny drum machine, or use it to build a simple game where you have to taps the buttons to repeat the sequence of lights that just flashed.
In stock
+ −
Add to wish list
WAVE-12076 RPi IR-CUT Camera, Better Image in Both Day and Night
US$35.26
This Raspberry Pi Camera supports all revisions of the Pi, it has got a infrared LED that makes it a great PI camera for outoor and indor projects.
In stock
+ −
Add to wish list
WAVE-10703 RPi Camera (H), Fisheye Lens, Supports Night Vision
US$40.90
This Raspberry Pi Camera supports all revisions of the Pi, it has got a Fisheye Lens that offers wider field of view and comes with infrared LED. All that makes it a great PI camera for outoor and indor projects.
In stock
+ −
Add to wish list
WAVE-14718 Colorful Display Module for micro:bit - 1.8 inch 160x128
US$19.95
This is a colorful display module designed for the BBC micro:bit, 1.8inch diagonal, 160x128 pixels, capable of displaying 65K colors.Tired of the 5x5 LED matrix? Time to get a tiny monitor for your micro:bit, this one would be the ideal choice.
In stock
+ −
Add to wish list
WAVE-11944 Raspberry Pi Zero V1.3 Camera Adapter Cable - 15cm
US$5.45
This ribbon cable allows you to connect the pi camera into your Raspberry PI Zero V1.3
To be used with the Raspberry Pi Zero V1.3 specifically.
In stock
+ −
Add to wish list
WAVE-12039 Raspberry Zero V1.3 mini Camera
US$27.99
This Raspberry Pi Camera module with cable supports Raspberry Pi Zero V1.3  and Raspberry Pi Zero W only. It features a 5 megapixel OV5647 sensor that's
In stock
+ −
Add to wish list
MOD-TS0199 PCF8591 AD/DA Converter Module
US$16.93

The PCF8591 is a single-chip, single-supply and low-power 8-bit CMOS data acquisition device with four analog inputs, one analog output and a serial I2C-bus interface. Three address pins A0, A1 and A2 are used for programming the hardware address, allowing maximum of eight devices connected to the I2C-bus without additional hardware. Address, control and data to and from the device are transferred serially via the two-line bidirectional I2C-bus.

In stock
+ −
Add to wish list
MOD-SFT-D302 SFT-D302 Dual Channel Digital Class D Digital Amplifier  2x30W - 7.5-24VDC
US$15.33
If you are looking into making a DIY boombox, look no further! This board will take care of all of the electronic work for you. Power it with a 2S/3S lipo battery, wire an audio connector to the input and you are ready to rock! Speakers, wires, connectors, lipo batteries are needed and sold separately.
In stock
+ −
Add to wish list
ARD-NANO-TS0234 Remote Controller Module for Arduino Nano and NRF24L01
US$12.59
The expansion board integrates the pin sockets for Arduino Nano and NRF24L01, as well as a 2.5D joystick. With this board, you can make a controller by yourself conveniently which can control a robot, smart car, or other smart devices.
In stock
+ −
Add to wish list
ARD-LP-FTDI LilyPad FTDI Basic Module - 5V 
US$9.23
This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with Arduino boards. It can also be used for general serial applications!
In stock
+ −
Add to wish list
72 - 86
80 81 82 83 84 85 86 87 88 89 90 91 92 93 94
88 - 102