Our Brands

Development Boards

67 - 81
75 76 77 78 79 80 81 82 83 84 85 86 87 88 89
83 - 97
Newest Items First
15 Per Page
pin:bit
US$8.95
pin:bit breaks out all of the useful pins from your micro:bit into breadboard format while providing handy-dandy labels to make your builds go smoothly. It's ideal for building small circuits on a breadboard, and for exploring what different types of components like LEDs, buttons, and analog sensors do and how they work. Our Explorer HAT Pro parts kit is an ideal set of components to use with pin:bit.
In stock
+ −
Add to wish list
PIM371 automation:bit
US$19.60
Control and monitor your world with automation:bit! It's tolerant of up to 24V, with analog and digital inputs, outputs, and a relay, so it's ideal for automating low-voltage systems in your home. Just slot in your micro:bit, then code automation:bit with the block-based Microsoft MakeCode editor. Hook up buttons to the inputs, use the built-in buttons on micro:bit, or the light-sensing capability of the LED matrix to control devices connected to automation:bit. Or why not use a second micro:bit's radio function as a remote control?
In stock
+ −
Add to wish list
Xenon
US$24.95
The Xenon is a low cost mesh-enabled development board that can act as either an endpoint or repeater within a Particle Mesh network. The Xenon is mesh only and designed to function as the endpoint of your IoT network. It is based on the Nordic nRF52840 and has built-in battery charging circuitry so it’s easy to connect a Li-Po and deploy your local network in minutes. The Xenon is best for connecting sensors, motors, pumps, valves, and points of data-interest. Pair it with an Argon or Boron gateway to get all that great data into the Device Cloud.
In stock
+ −
Add to wish list
Argon
US$54.55
The Argon is a powerful Wi-Fi enabled development board that can act as either a standalone Wi-Fi endpoint or Wi-Fi enabled gateway for Particle Mesh networks. It is based on the Nordic nRF52840 and has built-in battery charging circuitry so it’s easy to connect a Li-Po and deploy your local network in minutes. The Argon is great for connecting existing projects to the Particle Device Cloud or as a gateway to connect an entire group of local endpoints.
In stock
+ −
Add to wish list
Particle Debugger
US$28.00
The Particle Debugger gives you the power of professional debugging at a fraction of the cost. Using this accessory, you’ll be able to program Particle mesh-ready hardware over common interfaces like JTAG and SWD, using open source tools like GDB. Supports the open source CMSIS-DAP specification and DAPLink firmware developed by ARM. Comes with one JTAG ribbon cable.
In stock
+ −
Add to wish list
Particle Ethernet FeatherWing
US$28.00
The Ethernet FeatherWing is the fastest way to add wired connectivity to your Argon, Boron, or Xenon and turns any Particle Mesh developer kit into an Ethernet gateway. Based on the WIZnet W5500 chip, this side-by-side FeatherWing maintains great RF performance even while adding Ethernet connectivity to any Particle Mesh device.
In stock
+ −
Add to wish list
Particle FeatherWing Tripler
US$13.94
Perfect for any prototyping project, the Tripler provides space to add-on up to two FeatherWing accessories without any stacking header needs. Compatible with the newest generation of Particle developer kits (Particle Mesh). The Tripler has three breakouts for each pin on a Feather, as well as plain grid proto holes. In addition, three sets of pins are cross connected with a full strip of connected pads for GND and 3.3V.
In stock
+ −
Add to wish list
MOD-102 USB To RS-485 Converter
US$11.76
This is a USB to RS485 UART converter with transient overvoltage protection (TVS protection) and compliant with USB 2 and USB 1.1 standards.
Delivery within 2-3 weeks
+ −
Add to wish list
ARD-LP-B LilyPad Miniature Push Button
US$1.09
These pushbuttons are designed to give the user a low profile button without any sharp edges. Button closes when you push it and opens when you release (momentary push button).
In stock
+ −
Add to wish list
PI-SMARTFAN Smart Temperature Control Fan and Power Expansion Board for Raspberry Pi
US$27.93
This smart fan and power expansion board are designed for DIY makers, especially for Raspberry Pi lover, it is compatible with Raspberry Pi 3/ 2B/ B+. Built-in temperature sensor, with active cooling fan, you can control flexibly the ON/OFF of mini fan via I2C command and GPIO programming.
In stock
+ −
Add to wish list
MOD-MOSIRF IRF540 Four Channel MOSFET Switch Module
US$15.32
This board is a four channel mosfet that acts like a switch. Unlike the normal high current switches, this device allow users to send signal from their microcontroller to this board via PWM.
In stock
+ −
Add to wish list
DFR0548 Micro:bit Motor Driver Expansion Board
US$26.92
Since the advent of micro:bit, its simple and practical way of programming is widely loved by makers, students and teachers. Its sample design, coupled with a wealth of pin resources, give it infinite possibilities. This expansion board not only leads to 9 micro:bit onboard GPIO interfaces, but also comes with 4-way motor drives and 8 servo interfaces, of which 4-way motor drives can be reused as 2-way stepper motor drives.
In stock
+ −
Add to wish list
480x320, 3.5inch Resistive Touch Screen LCD, HDMI interface, IPS Screen for Raspberry PI
US$51.79
480x320, 3.5inch Resistive Touch Screen LCD, HDMI interface, IPS Screen for Raspberry PI Features 480x320 hardware resolution, software...
In stock
+ −
Add to wish list
WEMOS-MINI-PRO-A Wemos D1 Mini Pro – IoT Development Board with External Antenna
US$21.95
The Wemos D1 mini Pro is a mini wifi board based on ESP-8266EX microcontroller. This multi-purpose board is a fully functional microcontroller (SCL, SDA, SCK, MISO, MOSI, TX, RX, Reset) with the added fonctionality of connecting to a wifi network. Thus, allowing you to create a full range of IoT projects and gadgets. The board runs off the very powerful Espresiff chip set with an on-board ceramic antenna and a dock for connecting another for better reception. The board runs at a 3.3V logic level but offers a 5V power pin.
In stock
+ −
Add to wish list
WEMOS-PROTO ProtoBoard Shield for WeMos D1 mini
US$2.19
This kit comes with headers and pins along with a PCB board that allow you to plug your ESP8266 D1 Mini and access all its features for your custom project.
In stock
+ −
Add to wish list
67 - 81
75 76 77 78 79 80 81 82 83 84 85 86 87 88 89
83 - 97