Development Boards

US$272.99
This is a universal portable touch monitor, which features Type-C and HDMI connectivity, 1920×1080 pixels, toughened glass capacitive touch panel, and powerful 10000mAh battery. It's the perfect companion for Raspberry Pi, besides, other popular mini PC are also supported, such as Jetson Nano. In the case of working as a simple monitor with host devices like desktop computer, notebook, cell phone, or game console, it is also a "serious" option. Switch to the HD big screen in one second through the Type-C or HDMI connection, then start to study/work effectively, or enjoy yourself with your favorite drama/game.
In stock
+
Add to wish list

US$34.75
The GPS Shield is base on the ublox's NEO-6M receiver module , and the footprints is compatible with Arduino/MEGA boards. The regular GPS pins (RX, TX) can be connected to D0-D7 of Arduino. Support software SerialPort and Micro SD card interface. It's very easy to use. You just need read SerialPort and then you will get the GPS data. The GPS Shield module interfaces to the customer and application via one serial port, which uses CMOS voltage levels. support 3.3V / 5V IO operating. That's means 100% all Arduino mainboard compatible.
In stock
+
Add to wish list

US$15.24
The RFM69HCW is an inexpensive and versatile radio module that operates in the unlicensed ISM (Industry, Science and Medicine) band, a set of frequencies set aside for low-power, short-range, license-free radios. It’s perfect for building inexpensive short-range wireless networks of sensors and actuators for home automation, citizen science and more.
In stock
+
Add to wish list

US$18.15
The Elecrow Lora Shield is a long range transceiver on a Arduino shield form factor and based on Open source library.The Lora Shield allows the user to send data and reach extremely long ranges at low data-rates.It provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption.
In stock
+
Add to wish list

US$22.70
The Dual Channel H-Bridge Motor Shield is composed of 2 discrete MOSFET H-bridge, designed to drive two DC motor with max current 8A. It is made up of 8 N-channel MOSFET IRF3205S and 4 pcs of half bridge motor controller IR2104, to build 2 H-bridge. With this shield and the Arduino board, users can control and drive motors with a max current 8A@ 22V. The universal 7.4~11.1V lipo battery that are popular used in the remote car and model airplane can be applied as well.
In stock
+
Add to wish list

US$22.99
GY-26 is a low-cost digital compass module that collects data by utilizing a magnetoresistive sensor sensing the Earth's magnetic field to get an azimuth angle. The on-board 8-bit PIC16F690 microcontroller provides two modes of serial communication. A UART (TTL-level Tx/Rx) interface as well as I2C/IIC. The data is accessible by sending predefined ASCII commands over one of the chosen serial interfaces. The output is also in ASCII which can be converted to your desired format upon reception.
In stock
+
Add to wish list

US$15.24
Elecfreaks Smart Coding Kit is a wearable device based on micro:bit button cell extension baord Pro, a DIY micro:bit watch can be easily made with a simple installing method.
In stock
+
Add to wish list

US$127.35
ELECFREAKS Smart Science IoT Kit is developed based on loT:Bit,a new breakout board compatible with science sensors such as the ultrasonic sensor, dust sensor, light sensor and water level sensor,.including RTC Timing and WIFI module. You can gather data via thesensors and send data to the cloud with more stable and accuratedata analysis.
In stock
+
Add to wish list

US$83.93
Robit smart car is a kind of smart car which is based on micro:bit and ElecFreaks robit. Besides the RJ25 wiring port and motor port in Mbot, the robit is also equipped with 2-way DC motor connectors , 2-way stepping motor connectors(Stepping motor connectors and 4-way DC motor connectors are multiplexed ) and 8-way PWM signal output connectors. It can drive PWM signal driving devices like servo. It has 8-way G-5V-S digital signal connectors(for connecting with OCTOPUS electric bricks) and 4-way G-5V-S analog signal connectors(for connecting with OCTOPUS electric bricks). Robit can realize all current basic functions of MBOT and it can be regarded as the new generation of Mbot.
In stock
+
Add to wish list

US$15.33
The Adafruit Feather series gives you lots of options for a small, portable, rechargeable microcontroller board. Perfect for fitting into your next prop build! This FeatherWing will unlock the prop-maker inside all of us, with tons of stuff packed in to make sabers & swords, props, toys, cosplay pieces, and more. We looked at hundreds of prop builds, and thought about what would make for a great low-cost (but well-designed) add-on for our Feather boards.
Delivery within 2-3 weeks
+
Add to wish list

US$16.73
The Adafruit Feather series gives you lots of options for a small, portable, rechargeable microcontroller board. Perfect for fitting into your next prop build! This FeatherWing will unlock the prop-maker inside all of us, with tons of stuff packed in to make sabers & swords, props, toys, cosplay pieces, and more. This version of the FeatherWing has plain headers soldered in, so it's easy to plug into our Feathers. We looked at hundreds of prop builds, and thought about what would make for a great low-cost (but well-designed) add-on for our Feather boards.
In stock
+
Add to wish list

US$15.33
This is the FeatherWing Quad Side-by-Side - a prototyping add-on and more for all Feather boards. This is similar to our FeatherWing Proto (2884-ADA) except there are four! The magic of the Quad comes when you want to connect your Feather to three other Feather Wings without needing any stacking headers! The Quad comes with: 1 Quad Side-by-side Wing PCB, 4 sets Feather Female Headers.
In stock
+
Add to wish list

US$15.33
This is the FeatherWing Quad 2x2 - a prototyping add-on and more for all Feather boards. This is similar to our FeatherWing Proto (2884-ADA) except there are four! The magic of the Quad comes when you want to connect your Feather to three other Feather Wings without needing any stacking headers. The boards are all set up in a 2x2 grid, thus the name The Quad comes with: 1 Quad 2x2 Wing PCB, 4 sets Feather Female Headers.
In stock
+
Add to wish list

US$6.32
1 Channel Relay 3V Relay Module is one of OCTOPUS series of electric bricks. It is fundamentally designed according to OCTOPUS electric brick series with same shape, PCB positioning holes and electric brick connectors. OCTOPUS 1 Channel Relay has adopted a mini and high-quality HUIKE relay, which is available to control all kinds of home appliances and high current load devices. This is a common accessory module for electronic DIY fans.
In stock
+
Add to wish list

US$40.87

The Omega2 Pro IoT computer is the next generation of Onion’s Linux-based, WiFi development board and the most powerful IoT computer Onion has made yet. It is a standalone device – the processor, memory, gigabytes of storage, and Wi-Fi are all built-in, and it’s smaller than a breadboard, making it easier than ever to build connected hardware applications. The storage is pre-loaded with the OpenWrt embedded Linux distro, so getting started is as easy as plugging in a Micro USB cable for power and taking a few minutes to go through the browser-based setup wizard.

In stock
+
Add to wish list