Our Brands

Development Boards

57 - 71
65 66 67 68 69 70 71 72 73 74 75 76 77 78 79
73 - 87
Newest Items First
15 Per Page
Digital High-precision Compass Sensor Module (UART and I2C)
US$22.99
GY-26 is a low-cost digital compass module that collects data by utilizing a magnetoresistive sensor sensing the Earth's magnetic field to get an azimuth angle. The on-board 8-bit PIC16F690 microcontroller provides two modes of serial communication. A UART (TTL-level Tx/Rx) interface as well as I2C/IIC. The data is accessible by sending predefined ASCII commands over one of the chosen serial interfaces. The output is also in ASCII which can be converted to your desired format upon reception.
In stock
+ −
Add to wish list
EF08206 micro:bit smart coding kit (without micro:bit)
US$15.24
Elecfreaks Smart Coding Kit is a wearable device based on micro:bit button cell extension baord Pro, a DIY micro:bit watch can be easily made with a simple installing method.
In stock
+ −
Add to wish list
micro:bit smart science IoT kit (without micro:bit)
US$127.35
ELECFREAKS Smart Science IoT Kit is developed based on loT:Bit,a new breakout board compatible with science sensors such as the ultrasonic sensor, dust sensor, light sensor and water level sensor,.including RTC Timing and WIFI module. You can gather data via thesensors and send data to the cloud with more stable and accuratedata analysis.
In stock
+ −
Add to wish list
micro:bit robit smart car (without micro:bit board)
US$83.93
Robit smart car is a kind of smart car which is based on micro:bit and ElecFreaks robit. Besides the RJ25 wiring port and motor port in Mbot, the robit is also equipped with 2-way DC motor connectors , 2-way stepping motor connectors(Stepping motor connectors and 4-way DC motor connectors are multiplexed ) and 8-way PWM signal output connectors. It can drive PWM signal driving devices like servo. It has 8-way G-5V-S digital signal connectors(for connecting with OCTOPUS electric bricks) and 4-way G-5V-S analog signal connectors(for connecting with OCTOPUS electric bricks). Robit can realize all current basic functions of MBOT and it can be regarded as the new generation of Mbot.
In stock
+ −
Add to wish list
Adafruit Prop-Maker FeatherWing
US$15.33
The Adafruit Feather series gives you lots of options for a small, portable, rechargeable microcontroller board. Perfect for fitting into your next prop build! This FeatherWing will unlock the prop-maker inside all of us, with tons of stuff packed in to make sabers & swords, props, toys, cosplay pieces, and more. We looked at hundreds of prop builds, and thought about what would make for a great low-cost (but well-designed) add-on for our Feather boards.
Delivery within 2-3 weeks
+ −
Add to wish list
Assembled Adafruit Prop-Maker FeatherWing
US$16.73
The Adafruit Feather series gives you lots of options for a small, portable, rechargeable microcontroller board. Perfect for fitting into your next prop build! This FeatherWing will unlock the prop-maker inside all of us, with tons of stuff packed in to make sabers & swords, props, toys, cosplay pieces, and more. This version of the FeatherWing has plain headers soldered in, so it's easy to plug into our Feathers. We looked at hundreds of prop builds, and thought about what would make for a great low-cost (but well-designed) add-on for our Feather boards.
Delivery within 2-3 weeks
+ −
Add to wish list
Adafruit Quad Side-By-Side FeatherWing Kit with Headers
US$15.33
This is the FeatherWing Quad Side-by-Side - a prototyping add-on and more for all Feather boards. This is similar to our FeatherWing Proto (2884-ADA) except there are four! The magic of the Quad comes when you want to connect your Feather to three other Feather Wings without needing any stacking headers! The Quad comes with: 1 Quad Side-by-side Wing PCB, 4 sets Feather Female Headers.
In stock
+ −
Add to wish list
Adafruit Quad 2x2 FeatherWing Kit with Headers
US$15.33
This is the FeatherWing Quad 2x2 - a prototyping add-on and more for all Feather boards. This is similar to our FeatherWing Proto (2884-ADA) except there are four! The magic of the Quad comes when you want to connect your Feather to three other Feather Wings without needing any stacking headers. The boards are all set up in a 2x2 grid, thus the name The Quad comes with: 1 Quad 2x2 Wing PCB, 4 sets Feather Female Headers.
In stock
+ −
Add to wish list
EF04086 1 Channel Relay 3V Relay Module for Micro:bit
US$6.32
1 Channel Relay 3V Relay Module is one of OCTOPUS series of electric bricks. It is fundamentally designed according to OCTOPUS electric brick series with same shape, PCB positioning holes and electric brick connectors. OCTOPUS 1 Channel Relay has adopted a mini and high-quality HUIKE relay, which is available to control all kinds of home appliances and high current load devices. This is a common accessory module for electronic DIY fans.
In stock
+ −
Add to wish list
Omega2 Pro Development Board Computer
US$40.87

The Omega2 Pro IoT computer is the next generation of Onion’s Linux-based, WiFi development board and the most powerful IoT computer Onion has made yet. It is a standalone device – the processor, memory, gigabytes of storage, and Wi-Fi are all built-in, and it’s smaller than a breadboard, making it easier than ever to build connected hardware applications. The storage is pre-loaded with the OpenWrt embedded Linux distro, so getting started is as easy as plugging in a Micro USB cable for power and taking a few minutes to go through the browser-based setup wizard.

In stock
+ −
Add to wish list
7-SEGMENT FOR MICRO:BIT
US$24.95
The 7-segment for micro:bit is a four digit 7-segment display for micro:bit. You can use it to display numbers, but it can also display letters and other characters!
In stock
+ −
Add to wish list
5inch IPS Display for Raspberry Pi, DPI interface, no Touch, 800x480
US$50.39
Features: 5inch IPS screen, 800x480 hardware resolution. Compatible with Raspberry Pi 2B/3B/3B+/3A+/Zero/Zero W/Zero WH. The LCD is directly driven by Raspberry Pi DPI interface, refresh rate up to 60Hz. Supports Raspbian, Ubuntu, OSMC, etc. Backlight can be turned off to lower power consumption. Compact size, suit for various projects.
In stock
+ −
Add to wish list
UART TTL to Ethernet Converter
US$25.19
The UART TO ETH module provides an easy way to communicate between UART and Ethernet, it can be configured via web page.
In stock
+ −
Add to wish list
L76X Multi-GNSS HAT for Raspberry Pi, GPS, BDS, QZSS
US$41.99
This is a Raspberry Pi GNSS HAT which supports Multi-GNSS systems: GPS, BDS, and QZSS, with advantages such as fast positioning, high accuracy, low power consumption, and so on. It is an easy way to enable global positioning function for your Raspberry Pi.
In stock
+ −
Add to wish list
L3G4200D Tri-Axis Gyro Breakout Board
US$5.59
This is a breakout board for the L3G4200D low-power three-axis angular rate sensor.
In stock
+ −
Add to wish list
57 - 71
65 66 67 68 69 70 71 72 73 74 75 76 77 78 79
73 - 87