Development Boards

US$34.95
Argon ONE Aluminum Case [Pi 4 Applicable]. Make A Shiny Mini-Computer By This Decent Aluminium-Alloy Case Customized For Raspberry Pi 4.
In stock
+
Add to wish list

US$109.95
The SIM7600G-H 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption. You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.
In stock
+
Add to wish list

US$34.95
This super ICE Tower CPU Cooling Fan for Raspberry Pi is born for solving heat dissipation problem! Tower structure, 5mm copper tube, multi-layer heat sinks, 7 blades powerful fan, all the above combinations make this super radiator for Raspberry Pi. In the case of overclocking, it can reduce the temperature of the Raspberry Pi from 80℃ to 40℃. Best of all, this super cooling fan support both Raspberry Pi 3 and the new Raspberry Pi 4. In our actual use, we found that Raspberry Pi 4 has a large amount of heat. with the help of this super fan, the powerful performance of the Raspberry Pi 4 will be fully released.
In stock
+
Add to wish list

US$56.95
Feather is the new development board from Adafruit, and like its namesake, it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Assembled Adafruit Feather M0 WiFi w/ATWINC1500 - our take on an 'all-in-one' Arduino-compatible + high speed, reliable WiFi with built in USB and battery charging. Its an Adafruit Feather M0 with a WiFi module.
In stock
+
Add to wish list

US$1.99

This Heat Sink Cooler Kit For Cooling your Raspberry Pi includes 4 aluminum heat sinks with adhesive backing.

Delivery within 2-3 weeks
+
Add to wish list

US$5.49
A simple device that plugs into any servo/Rx port, will detect the loss of Tx signal and emit a loud 85dB alarm.
In stock
+
Add to wish list

US$34.16
If you’re ready to step up your Arduino game from older 8-bit/16MHz microcontrollers, the SparkFun RedBoard Turbo is a formidable alternative. At its heart, the RedBoard Turbo uses the ATSAMD21G18, which is an ARM Cortex M0+, 32-bit microcontroller that can run at up to 48MHz. With an impressive 4MB of external flash memory and a UF2 (USB Flashing Format) bootloader, the RedBoard Turbo provides you with an economical and easy to use development platform if you're needing more power than the classic RedBoard.
In stock
+
Add to wish list

US$120.30
The Qwiic Pro kit provides you with a RedBoard Turbo, two sensors, two accessory boards, and all the cables you need to start utilizing Qwiic and I2C easily. This kit was designed to allow users to get started with Arduino without the need for soldering or breadboarding. Hooking up a handful of inputs and outputs to a RedBoard has never been so easy. Use the joystick, accelerometer, or proximity sensor, and one small display for outputting text, graphics, or even a microPong game!
In stock
+
Add to wish list

US$24.99

This is a highspeed EEPROM programmer designed to flash and rewrite EEPROMs. The EZP2019 is the upgraded version of our EZP2010 programmer. Unit comes with the programmer, USB Cable and Protoboard for SMD types. The manual, driver and software is found in the CD included in the box.

In stock
+
Add to wish list

US$17.55
Its a fully assembled 2.1 channel 60W Amplifier board.
In stock
+
Add to wish list

US$26.99
This is a 2-channel isolated RS485 expansion HAT designed for Raspberry Pi, adopts the SC16IS752+SP3485 solution, with embedded protection circuits such as power supply isolation, ADI magnetical isolation, and TVS diode, etc. It is easy to control the 2-channel RS485 for auto transceiving via SPI interface. Due to its fast communication, stability, reliability, and safety, it is an ideal choice for fields like industrial automation.
In stock
+
Add to wish list

US$49.99
This is a Raspberry Pi IoT driver board for e-Paper raw panels. It allows getting text/image data from IoT clouds through NB-IoT/eMTC/EDGE/GPRS network connection, and then display them on the e-Paper.
In stock
+
Add to wish list

US$15.99
XH-M577 is a dual channel 2 x 80W audio amplifier. It requires a 12-24VDC input to operate. It can handle up to 5A of current. This board has knobs for treble, middle, bass and total volume adjustment.
In stock
+
Add to wish list

US$12.09
XH-A233 is a dual channel 2 x 15W audio amplifier that uses TF card and Bluetooth as its audio input methods.
In stock
+
Add to wish list

US$8.14

The Waveshare CAN Board SN65HVD230 features an accessory onboard CAN transceiver, which is pinout compatible with PCA82C250. It is powered from 3.3 V and features ESD protection. The SN65HVD230 CAN Board is ideal to connect microcontrollers to the CAN network. Designed for operation in especially-harsh environments, it features cross-wire protection, loss-of-ground and overvoltage protection, overtemperature protection, as well as wide common-mode range.

In stock
+
Add to wish list