Our Brands

Development Boards

55 - 69
63 64 65 66 67 68 69 70 71 72 73 74 75 76 77
71 - 85
Newest Items First
15 Per Page
3pcs Heatsink for Raspberry Pi 4 Model B
US$2.99

This Heat Sink Cooler Kit For Cooling your Raspberry Pi includes 3 aluminum heat sinks with adhesive backing.

In stock
+ −
Add to wish list
Raspberry Pi 4 5V 3A USB Type-C DC Power Supply with Inline ON/OFF Switch
US$7.23
This is a budget oriented AC to DC power supply made to work with Raspberry Pi 4 Model B that require 3 Amps to operate. It plugs in to your device via a USB Type-C male connector. It also has an inline ON/OFF switch.
In stock
+ −
Add to wish list
HDMI Bi-Directional Switch - 2-input 1-output / 1-input 2-output
US$14.95
This HDMI switch provides an easy and feasible way of controlling multiple HDMI devices. This control box is capable of choosing between 2 HDMI inputs or outputs via the push button.
In stock
+ −
Add to wish list
FTDI Serial TTL-232 USB Type C Cable - 5V Power and Logic
US$30.95
This is a USB C to TTL serial cable with an FTDI FT232R usb/serial chip embedded in the head. It has a 6-pin socket at the end with 5V power and ground, as well as RX, TX, RTS and CTS at 3V logic levels. Useful whenever you want to communicate with a TTL serial device and the pinout will match up exactly to any 'FTDI' 6-pin header.
In stock
+ −
Add to wish list
SparkFun Fuse Breakout Kit
US$7.43
The SparkFun Fuse Breakout Kit comes with everything you need to assembly & use a glass capsule, inline fuse (ferrule type) for your project. The simple breakout design allows for a barrel jack and the option for a screw terminal to be used for (VIN) power input and a second screw terminal used for VOUT. Any 5mm x 20mm glass capsule fuse can be used with this kit depending on your project needs but we have been sure to include a 250VAC, 500mA one to get you started.
In stock
+ −
Add to wish list
SparkFun ATX Power Connector Breakout Board
US$2.79
The ATX power connector breakout board breaks out the standard 4-pin computer peripheral port when mated with an ATX connector for your 12V and 5V devices! Once you have chosen a power supply (whether it be an ATX power supply or the 12V/5V wall adapter), you're ready to give your project some life! This board will need additional parts including a 12V/5V power supply, an ATX breakout, and screw terminals to power your project directly or pump power into a breadboard using standard headers.
In stock
+ −
Add to wish list
SparkFun ATX Power Connector Breakout Kit - 12V/5V (4-pin)
US$29.03
The ATX power connector breaks out the standard 4-pin computer peripheral port for your 12V and 5V devices! Once you have chosen a power supply (whether it be an ATX power supply or the included 12V/5V wall adapter), you're ready to give your project some life! This kit has everything you need to solder together an ATX breakout and screw terminals for powering your project directly or pumping power into a breadboard.
In stock
+ −
Add to wish list
TM7711 Weighing Sensor Module
US$4.49
This module uses TM7711 chip and converts the change in resistance into weight readings. The TM7711 has higher precision ratio compare to HX711.
In stock
+ −
Add to wish list
Bird Tweet Tone Music Chip Module
US$0.79
This is a pre-recorded music chip module, suitable for hobby projects.
In stock
+ −
Add to wish list
TTGO T-Display Development Board (ESP32+ Bluetooth+ 1.14 inch LCD)
US$31.80
The TTGO T-Display is a System-in-Package (SiP) module that is based on the ESP32, providing complete Wi-Fi and Bluetooth functionalities.
In stock
+ −
Add to wish list
Neopixel Rainbow LED strip and GVS conector -10 LEDs
US$6.99
This is a colorful strip based on WS2812B beads, it can display the color of RGB and support multiple cascade at the same time.
In stock
+ −
Add to wish list
EF08209, Smart Cutebot for Micro:bit (without micro:bit)
US$45.27
The EF08209 is a rear-drive smart car driven by dual high-speed motors. Modules are interchangeable and can be programmed for endless possibilities of fun!
In stock
+ −
Add to wish list
ELECFREAKS Wukong board with Lego holder for micro:bit
US$39.99
Wukong is a high integrated breakout board with multiple functions based on micro:bit, which has a similar size with the micro:bit with buzzer, servo and motor drivers on board. The base board designs with standard 7x5 square bricks that can adapt perfectly to Lego.
In stock
+ −
Add to wish list
TTGO T-Call ESP32 Development board - V1.3
US$44.32
This is an ESP32 based development board integrated with TTGO point to point wireless communication module, Bluetooth and GPRS SIM800L module.
In stock
+ −
Add to wish list
751-00050 Rubber Band Tires, Bag of 50
US$7.99
The Rubber Band Tire fits our classic 8-spoke, 2.58" diameter small robot wheels used with the SumoBot and the classic-style Boe-Bot.  This bag of 50 will...
Delivery within 2-3 weeks
+ −
Add to wish list
55 - 69
63 64 65 66 67 68 69 70 71 72 73 74 75 76 77
71 - 85