Our Brands

Development Boards

53 - 67
61 62 63 64 65 66 67 68 69 70 71 72 73 74 75
69 - 83
Newest Items First
15 Per Page
SparkFun weather:bit - micro:bit Carrier Board (Qwiic)
US$26.28
The SparkFun weather:bit is a fully loaded "carrier" board for the micro:bit that, when combined with the micro:bit, provides you with a fully functional weather station. With the weather:bit you will have access to barometric pressure, relative humidity and temperature readings. There are also connections on this carrier board to optional sensors such as wind speed, direction, rain gauge and soil readings!
In stock
+ −
Add to wish list
NVIDIA Jetson Nano Developer Kit (V3)
US$261.58
The latest addition the Jetson family, the NVIDIA® Jetson Nano™ Developer Kit (V3) delivers the performance to run modern AI workloads in a small form factor, power-efficient (consuming as little as 5 Watts), and low cost. Developers, learners, and makers can run AI frameworks and models for applications like image classification, object detection, segmentation, and speech processing. The developer kit can be powered by micro-USB and comes with extensive I/Os, ranging from GPIO to CSI.
In stock
+ −
Add to wish list
STEMMA Wired Potentiometer Breakout Board - 10K ohm Linear
US$5.99
For the easiest way possible to measure twists, turn to this STEMMA potentiometer breakout (ha!). This plug-n-play pot comes with a JST-PH 2mm connector and a matching  JST PH 3-Pin to Male Header Cables - 200mm, so wiring up is a cinch.
In stock
+ −
Add to wish list
EF03426 IoT:bit : Internet WIFI extension board for micro:bit
US$24.95
IOT:bit is an expansion board based on IoT for micro:bit. It uses ESP8266 as WIFI expansion board and serial port to communicate with micro:bit. It also has extended all available IO port of the micro:bit which is leaded by GVS and you can extent various 3V E-blocks as LED, photosensitive and servo by using it. At the same time, the IOT:bit with an on-board buzzer for outside sound and an on-board RTC clock for timing without power supply.
In stock
+ −
Add to wish list
Ring:bit Car Accessories (Sonar:bit, Tracking Module and LED Light bar)
US$24.99
Tracking module is installed in the front to make sure it goes along with the black line. Sonar:bit is installed in the back to make sure it goes freely avoiding any obstacle. Light bar module is installed in the front to make the car more bright and beautiful.
In stock
+ −
Add to wish list
Micro:Bit IO Expansion Board
US$8.79
This is an expansion board for micro:bit. It extended all available IO port of the micro: bit which is led by GVS and you can extend various 3V E-blocks as LED, photosensitive and servo by using it.
In stock
+ −
Add to wish list
SparkFun Qwiic Button - Red LED
US$9.20
The Qwiic Button with built-in red LED simplifies all of those nasty worries away into an easy to use I2C device! Utilizing our Qwiic Connect System, using the button is as simple as connecting a cable and loading up some pre-written code!
In stock
+ −
Add to wish list
SparkFun Qwiic pHAT V2.0 for Raspberry Pi
US$11.39
The SparkFun Qwiic pHAT V2.0 for Raspberry Pi provides you with the quickest and easiest way to enter into SparkFun’s Qwiic ecosystem while still using that Raspberry Pi that you’ve come to know and love. The Qwiic pHAT connects the I2C bus (GND, 3.3V, SDA, and SCL) on your Raspberry Pi to an array of Qwiic connectors on the HAT.
In stock
+ −
Add to wish list
USB Type C Socket - SMT Inline Breakout Board
US$5.49
This USB Type C breakout is kinda interesting, it looks similar to our right angle USB C socket breakout, but it's an 'inline' style with pads for soldering to the connections. We think it could be handy for making custom cable harnesses!
In stock
+ −
Add to wish list
4-ch Current/Voltage/Power Monitor HAT for Raspberry Pi, I2C/SMBus
US$45.45
This is a 4-ch current and power monitor HAT designed for Raspberry Pi. Via the I2C or SMBus interface, it is easy to monitor each channel's current, voltage, and power consumption, as well as the voltage between both sides of the sampling resistor.
In stock
+ −
Add to wish list
Adafruit MCP2221A Breakout - General Purpose USB to GPIO ADC I2C - Stemma QT / Qwiic
US$9.99
What can the MCP2221 chip do?  This chip from Microchip is similar to a USB to serial converter chips but adds a GPIO and I2C interface as well. The analog/digital GPIO pins can act as 10-bit analog inputs (ADC) and there's even a 5-bit DAC output. The I2C interface is great for talking to OLEDs, sensors, PWM drivers, its the most popular interface for small devices.
Delivery within 2-3 weeks
+ −
Add to wish list
Adafruit Mini PiTFT 1.3" - 240x240 TFT Add-on for Raspberry Pi
US$22.95
This product is your little TFT pal, ready to snap onto any and all Raspberry Pi computers, to give you a little display. The Mini PiTFT comes with a full color 240x240 pixel IPS display with great visibility at all angles. The TFT uses only the SPI port so its very fast, and we leave plenty of pins remaining available for buttons, LEDs, sensors, etc. It's also nice and compact so it will fit into any case.
In stock
+ −
Add to wish list
13.3inch HDMI LCD (H) (with case) V2, 1920x1080, IPS
US$254.57
13.3inch IPS screen,1920x1080 hardware resolution. Toughened glass capacitive touch panel, 6H hardness. Supports popular mini PCs such as Raspberry Pi, Jetson Nano, BB Black, as well as general desktop computers. When works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free. When work as a computer monitor, supports Windows 10/8.1/8/7, ten-points touch, and driver free. Supports popular game consoles like Microsoft XBOX360, Sony PS4, and Nintendo Switch. Multi languages OSD menu, for power management, brightness/contrast adjustment, etc. 3.5mm audio jack, supports HDMI audio output. Embedded ferrite Hi-Fi speaker.
In stock
+ −
Add to wish list
STM32F103RCT6 ARM STM32 Mini Development Board
US$18.95
This is the Mini Development Board is based on STMicro Chip (STM32F103RCT6).
In stock
+ −
Add to wish list
2-Channel Isolated RS232 Expansion HAT for Raspberry Pi
US$24.99
This is a 2-channel isolated RS232 expansion HAT designed for Raspberry Pi, adopts the SC16IS752+SP3232 solution, with embedded protection circuits such as power supply isolation, ADI magnetical isolation, and TVS diode, etc. It is easy to control the 2-channel RS232 via SPI interface. Due to its fast communication, stability, reliability, and safety, it is an ideal choice for fields like industrial automation.
In stock
+ −
Add to wish list
53 - 67
61 62 63 64 65 66 67 68 69 70 71 72 73 74 75
69 - 83