Our Brands

Development Boards

49 - 63
57 58 59 60 61 62 63 64 65 66 67 68 69 70 71
65 - 79
Newest Items First
15 Per Page
Analog Discovery 2 Pro Bundle
US$600.60
Start verifying and testing a wide range of projects with the Analog Discovery 2. With the addition of the BNC adapter and scope probes, professional or experienced engineers can access the full 30MHz bandwidth oscilloscope and 12MHz bandwidth waveform generator.
In stock
+ −
Add to wish list
Nexys A7-100T: FPGA Trainer Board Recommended for ECE Curriculum
US$722.00
The Nexys A7 is the new name for our popular Nexys 4 DDR board, now available in two FPGA densities! Featuring the same Artix™-7 field programmable gate array (FPGA) from Xilinx®, the Nexys A7 is a ready-to-use digital circuit development platform designed to bring additional industry applications into the classroom environment. The Artix-7 FPGA is optimized for high-performance logic, and offers more capacity, higher performance, and more resources than earlier designs. With its large, high-capacity FPGA and collection of USB, Ethernet, and other ports, the Nexys A7 can host designs ranging from introductory combinational circuits to powerful embedded processors.
Delivery within 2-3 weeks
+ −
Add to wish list
Pmod ToF: Time of Flight Sensor
US$27.98
The Pmod ToF (Time of Flight) is a sensor that enables optical distance sensing at low power. The on-chip digital signal processor on the ISL29501 calculates the time it takes for light emitted by the ToF to travel to the target and back, which is proportional to the distance to the target. The Pmod ToF can measure distances of up to five meters.
In stock
+ −
Add to wish list
Pmod CMPS2: 3-Axis Compass
US$11.18
The Digilent Pmod CMPS2 is a digital compass module using Memsic's MMC34160PJ magnetometer. The local magnetic field strength can be measured in a ±16 Gauss range with a heading accuracy of 1° and up to 0.5 mG of resolution.
In stock
+ −
Add to wish list
Pmod PIR: Passive Infrared Motion Sensor
US$20.98
The Digilent Pmod PIR is a Passive Infrared Sensor for monitoring movement at low power.
In stock
+ −
Add to wish list
Analog Discovery Studio MTE Cables: Male Terminated MTE Cables for Analog Discovery Studio
US$27.98
The Analog Discovery Studio MTE (Measurement and Test Equipment) cables are the same MTE cables that ship with the Analog Discovery Studio. This set of six cables features male-terminated flywires are perfect for connecting signals to circuits on the Breadboard Canvas.
Delivery within 2-3 weeks
+ −
Add to wish list
Analog Discovery Studio: A portable circuits laboratory for every student (+ two BNC Oscilloscope probes and two BNC to mini grabber probes)
US$1,041.00
The Analog Discovery Studio is a fully functional, portable test and measurement device that can turn any cross-functional space into a pop-up electronics laboratory. Equipped with 13 instruments, including an Oscilloscope, Logic Analyzer, Spectrum Analyzer, Waveform Generator, and more; the Analog Discovery Studio provides an entire stack of bench-top instruments with a convenient, replaceable, and breadboardable interface, perfect for enabling student learning anywhere!
Delivery within 2-3 weeks
+ −
Add to wish list
Analog Discovery Studio: A portable circuits laboratory for every student
US$978.60
The Analog Discovery Studio is a fully functional, portable test and measurement device that can turn any cross-functional space into a pop-up electronics laboratory. Equipped with 13 instruments, including an Oscilloscope, Logic Analyzer, Spectrum Analyzer, Waveform Generator, and more; the Analog Discovery Studio provides an entire stack of bench-top instruments with a convenient, replaceable, and breadboardable interface, perfect for enabling student learning anywhere!
Delivery within 2-3 weeks
+ −
Add to wish list
Ultimate Analog Discovery 2 Bundle
US$774.20
Test and debug a wide range of circuits with the Analog Discovery and ALL of it's accessories. The BNC Adapter and Probes allow the Oscilloscope and Waveform Generator on the Analog Discovery 2 to be accessed using traditional BNC type probes. For applications that are better suited to breadboards, the Breadboard Breakout and Breadboard Adapter provide different options for quick connection to a breadboard. The mini-grabbers provide a secure connection to ICs and smaller components for the Oscilloscope, Waveform Generator, Logic Analyzer or any of the 12 test and measurement devices on the Analog Discovery 2.
Delivery within 2-3 weeks
+ −
Add to wish list
Pmod AQS: Digital Gas Sensor for Air Quality
US$34.98
The Digilent Pmod AQS is a digital gas sensor for monitoring indoor air quality at low power. Optimized low-power modes. Integrated MCU with ADC. The Total Volatile Organic Compound (TVOC) output range is from 0ppb to 1187ppb. 10-bit measurement resolution. 6-pin Pmod connector with I²C interface. Pass-through Pmod host port for daisy chaining.
In stock
+ −
Add to wish list
MAX3232 RS232 to TTL Converter Module
US$3.49
This module is based on the MAX3232 RS232 transceiver and works both with 3.3V and 5V circuits. It can be used to convert the RS232 voltage of PC to TTL voltage used by the microcontroller. Directly plug the DB9 connector to your PC then you can communicate with the microcontrollers using the Serial port.
In stock
+ −
Add to wish list
5-Way Navigation Switch
US$1.98
This navigation switch is an intuitive way to add 5 button's worth of interfacing with a single component. Inside is 5 switches: left, right, up, down and 'select' (pressing down), all with a common ground pin.
In stock
+ −
Add to wish list
H-Bridge Motor Shield
US$25.41
This H-Bridge Motor Shield based on 8 N-channel MOSFET IRF3205S and 4 pcs half-bridge motor controller IR2104, to build 2 H-bridge. With this shield, you can control two DC motor with max current up to 8A with 22v voltage at the same time. Also, you can control the motor direction by the logic 0 or 1 with digital pin and speed by the PWM PIN of you MCU, like Arduino. And we support Screw interface, it is easy to connect to the motor and power.
Delivery within 2-3 weeks
+ −
Add to wish list
ESP8266 WIFI Shield
US$11.81
This WiFi Shield based on ESP-12F, which is the new version of the ESP-12 with the Wifi chip ESP8266. With this Shield, you can make your Arduino easy to connect to the network and control your device anywhere. Just communicate via the UART interface and control by AT command.
In stock
+ −
Add to wish list
Maduino Zero NFC
US$35.00
Maduino Zero NFC is an Arduino compatible small development board with NFC (Near-Field Communication). This board will be the bridge that helps you wirelessly interact with your environment, drive motors, unlock strikes, control relays, read from a temperature sensor and all thanks to built-in NFC connectivity, right out of the box. Same other Maduino Zero boards, this board is based on ATSAMD21G18(which actually makes it available to work with MicroPython, if you re-program the bootloader).
In stock
+ −
Add to wish list
49 - 63
57 58 59 60 61 62 63 64 65 66 67 68 69 70 71
65 - 79