Our Brands

Development Boards

47 - 61
55 56 57 58 59 60 61 62 63 64 65 66 67 68 69
63 - 77
Newest Items First
15 Per Page
2 Channel Stereo Audio Amplifier Module 5W+5W (PAM8403) Bluetooth 5.0
US$8.47
2 Channel Stereo 5W+5W(PAM8403) Bluetooth 5.0 Audio Amplifier Module This 5W audio amplifier features the PM8403 amplifier chip integrated...
In stock
+ −
Add to wish list
LilyPad Wearable Kit with Lilypad Arduino,LED and Sensors
US$59.95
LilyPad proto snap development kit is designed to learn how to add projects to Art Wearables(e-Textile) where to do electronic clothing.
In stock
+ −
Add to wish list
MOD-LM2662 Switched Capacitor Positive to Negative Voltage Conversion Module +5V/-5V 200mA
US$5.49
LM2662 Switched Capacitor Positive to Negative Voltage Converter Module +5V/-5V 200mA The maximum efficiency of 99%. The charge pump circuit is...
In stock
+ −
Add to wish list
BB-USBC Type C Male USB 3.1 Test Breakout Board
US$4.54
Board size: 20.6*10MM, Board thickness: 0.8MM sheet: FR-4 glass fiber board
In stock
+ −
Add to wish list
BB-USBC1 TYPE C Male to TYPE C Female USB 3.1 to 24pins Breakout Test Board, Double-sided
US$8.60
Board size: 20.6*36.2MM, Hole spacing: 2.54MM, Aperture: 1.0MM, Board thickness: 0.8MM sheet: FR-4 glass fiber board
In stock
+ −
Add to wish list
BB-USBC3  TYPE C female USB 3.1 to 24pins Breakout Test Board, Double-sided
US$9.46
 
In stock
+ −
Add to wish list
SIM7070G NB-IoT / Cat-M / GPRS / GNSS HAT for Raspberry Pi, global band support
US$53.95
This is a telecommunication HAT for Raspberry Pi which supports global bands of NB-IoT, Cat-M, and GPRS, as well as GNSS positioning function. Due to its advantages like small size, low delay, and wide coverage, it is the ideal choice for IoT applications such as intelligent instruments, asset tracking, remote monitoring, e-health, and so on.
In stock
+ −
Add to wish list
Pmod AD5: 4-channel 4.8 kHz 24-bit A/D Converter
US$82.09
The Pmod AD5 is an analog-to-digital converter that utilizes a fourth order sigma-delta modulator, a programmable gain array, and on-chip digital filtering, all powered by the Analog Devices AD7193. With 24 bits of resolution on up to 8 different analog input channels, users may read the highly accurate voltage measurements with an rms noise as low as 11 nV through SPI.
In stock
+ −
Add to wish list
Pmod BT2: Bluetooth Interface
US$52.48
The Pmod BT2 is a powerful peripheral module employing the Roving Networks® RN-42 to create a fully integrated Bluetooth interface. Users can communicate with the chip via UART and can also use the secondary SPI header on the board for updating the RN-42 firmware if needed.
In stock
+ −
Add to wish list
Pmod DA3: One 16-bit D/A Output
US$52.48
The Pmod DA3 is a 16-bit Digital-to-Analog converter powered by the Analog Devices AD5541A. The single-ended SMA output provides a clean, guaranteed monotonic analog output from the provided information given through an interface similar to SPI.
In stock
+ −
Add to wish list
Pmod I2S2: Stereo Audio Input and Output
US$39.36
The Digilent Pmod I2S2 features a Cirrus CS5343 Multi-Bit Audio A/D Converter and a Cirrus CS4344 Stereo D/A Converter, each connected to 3.5mm Audio Jacks. These circuits allow a system board to transmit and receive stereo audio signals via the I2S protocol. The Pmod I2S2 supports 24-bit resolution per channel at input sample rates up to 108KHz.
Delivery within 2-3 weeks
+ −
Add to wish list
Pmod GPS: GPS Receiver
US$48.98
The Pmod GPS can provide satellite-positioning accuracy to any embedded system. By communicating through UART with the GlobalTop FGPMMOPA6H GPS module, users may benefit from the 3-meter accuracy for any long term traveling.
In stock
+ −
Add to wish list
Pmod AD1: Two 12-bit A/D Inputs
US$72.43
The Digilent Pmod AD1 is a two channel, 12-bit analog-to-digital converter that features Analog Devices AD7476A. With a sampling rate of up to 1 million samples per second, this Pmod is capable of excelling in even the most demanding audio applications.
In stock
+ −
Add to wish list
Pmod USBUART: USB to UART Interface
US$18.36
The Pmod USBUART provides a USB to UART cross-conversion through the FTDI FT232R. Users may send data in either direction on the Pmod and receive the converted data in the appropriate format.
In stock
+ −
Add to wish list
Pmod RS232: Serial Converter and Interface Standard
US$18.36
The Digilent Pmod RS232 converts between digital logic voltage levels to RS232 voltage levels using the Maxim Integrated MAX3232 transceiver. The RS232 module is configured as a data communications equipment (DCE) device. It connects to data terminal equipment (DTE) devices, such as the serial port on a PC, using a straight-through cable.
In stock
+ −
Add to wish list
47 - 61
55 56 57 58 59 60 61 62 63 64 65 66 67 68 69
63 - 77