Our Brands

Development Boards

41 - 55
49 50 51 52 53 54 55 56 57 58 59 60 61 62 63
57 - 71
Newest Items First
15 Per Page
HDMI To CSI Adapter For Raspberry Pi Series, 1080p@30fps Support
US$45.27
This is an HDMI to CSI camera port adapter designed for Raspberry Pi with up to 1080p@30fps support from HDMI input, backward compatible. It allows you to use HDMI cameras just as the standard Raspberry Pi CSI cameras, all versions of Raspberry Pi series boards are supported.
In stock
+ −
Add to wish list
ESP32 One, mini Development Board with WiFi / Bluetooth, WIth Camera Module
US$29.80
OV2640 camera (optional) and digital microphone, supports applications like image recognition, voice processing... Standard 40PIN GPIO header, compatible with Raspberry Pi HATs for sorts of IoT applications. Integrated Li-ion battery boost charging manager, supports battery charging/discharging, can also be powered from USB connection. Compatible with Arduino and ESP-IDF software SDK, seamlessly connecting with ESP-WHO applications. Onboard 8MB PSRAM, 4MB FLASH storage, supports SD extension as well.
In stock
+ −
Add to wish list
3.5inch Capacitive Touch Screen LCD For Raspberry Pi, 640×480, DPI, IPS, Toughened Glass Cover, Low Power
US$62.56
Raspberry Pi: Based on Raspberry Pi 40PIN GPIO header. Driven by Raspberry Pi DPI666 interface, up to 60Hz refresh rate. 5-Points touch control through Raspberry Pi I2C interface. Supports systems like Raspbian, Kali... Supports future version which is backward compatible.
In stock
+ −
Add to wish list
BB-USBC6 24pin Type-C USB 3.1 Plug connector Breakout Board
US$3.59
The USB 3.1 type C 24 pin female connector can be used to operate computer equipment, Audio equipment , TV and all kinds of small autoimmunization equipment and instruments etc.

 

In stock
+ −
Add to wish list
BB-USBC5 24pin Type-C USB 3.1 Male Plug Connector Breakout Board
US$4.99
The USB 3.1 type C 24 pin male connector can be used to operate computer equipment, Audio equipment , TV and all kinds of small autoimmunization equipment and instruments etc.

 

In stock
+ −
Add to wish list
BB-USBA Converter USB Female to Male to Micro USB to 4P Terminal
US$2.27
This is a Multi USB converter which consists of USB Type A Male and Female, USB Type B Micro,and 4 Pin Header. You can use any of these combinations to convert the power & data signals to use in your projects.

 

In stock
+ −
Add to wish list
BB-USBC4 Converter USB Female to Male to Type-C to Micro USB to 4P Terminal
US$2.99

This is a Multi USB converter which consists of USB Type A Male and Female, USB Type B Micro, USB Type C and 4 Pin Header. You can use any of these combinations to convert the power & data signals to use in your projects.

 

In stock
+ −
Add to wish list
AM-116 8 Channel I/O Bidirectional Logic Converter
US$7.95
It is a 8 channel or 8-bit logic level converter that is great for interfacing sensors or 3.3v logic components with 5v logic level microcontrollers or vice versa. This unit will do the level shifting required to allow these devices to communicate without burning out each other. If you want to convert an analog signal you require an op-amp.
In stock
+ −
Add to wish list
T-71 OLED 7 In1 Multi-Function Tester
US$31.80
This is a 7 in 1 100V/20A OLED Multi-Function Tester also known as Electrical Parameter Tester can measure a variety of electrical parameters, from current and voltage to resistance, continuity and beyond. 
 
In stock
+ −
Add to wish list
Raspberry Pi Pico
US$8.14
The Raspberry Pi Pico is a low-cost, high-performance microcontroller board with flexible digital interfaces. It feature the RP2040 which marks Raspberry Pi's first microcontroller designed in-house. Pico provides minimal (yet flexible) external circuitry to support the RP2040 chip (Flash, crystal, power supplies and decoupling and USB connector). The majority of the RP2040 microcontroller pins are brought to the user IO pins on the left and right edge of the board. Four RP2040 IO are used for internal functions - driving an LED, on-board Switched Mode Power Supply (SMPS) power control and sensing the system voltages.
In stock
+ −
Add to wish list
DC-5300-USB-SW, 5V 3A Adapter US Plug with Cable and ON/OFF Switch
US$11.78
  • Compact design can be used for travel or home.
  • Lightweight and portable, easy installation.
  • 100 ～ 240V voltage for different country and district use.
  • Made of eco-friendly PC material, to ensure the long using time.
In stock
+ −
Add to wish list
LORA-TTGO-S32 915Mhz TTGO T-Motion V1.0 Smart Development Board S76G LORA STM32 GNSS Wireless Module
US$63.56
The STM32 board has all the functions required for IOT. But these newly introduced TTGO boards are different from the previous. These are embedded with the STM32 chip with SX1276 which allows it to work with LoRa technology via SMA connected antenna. You can program this board using the Arduino environment. For code please refer to the link below.
In stock
+ −
Add to wish list
PI-CAMERA-N Raspberry Pi 4B/3B+/Zero/WH Infrared Focus Adjustable Night Vision Camera With Bracket And Screwdriver
US$27.25
The Raspberry Pi 4B/3B+/Zero/WH camera use 5 megapixel OV5647 sensor, with manually focal adjustable lens. The field of view is normal 60 degree(diagonal). For night vision effection, you need to install the infrared sensor light. In case of bad connection, please install the screws tightly. The white camera flat cable is used for Raspberry Pi 4B/3B+/3B version , and the golden one is for Zero verion. There is also an acrylic holder for the camera.
In stock
+ −
Add to wish list
SENS-ADXL346 Triaxial Acceleration Sensor Module Accelerometer I2C SPI IIC ADXL346
US$9.96
The ADXL346 is well suited for mobile device applications. It measures the use of static gravity acceleration in tilt sensing applications, as well as the acceleration of dynamic acceleration motion or vibration caused by its high resolution (4mg / LSB) can be measured tilt change is less than 1 degrees of inclination.
In stock
+ −
Add to wish list
40 Pin GPIO Extension Cable for any 2x20 Pin Raspberry Pi - 150mm / 6" long
US$4.54
Unlike the 'classic' Raspberry Pi computers, you can't really stick a HAT, bonnet, pHAT or other accessory/add-on on top...what to do? Give up!? NO! Use this cable, which will act as an extender for all 40 pins to give you a stretch of about 150mm / 6 inches. Simply plug the socket side into the Raspberry Pi with the white mark next to the Pin 1 label. Then on the other side, plug the hat down onto the plug side.
Delivery within 2-3 weeks
+ −
Add to wish list
41 - 55
49 50 51 52 53 54 55 56 57 58 59 60 61 62 63
57 - 71