Our Brands

Development Boards

37 - 51
45 46 47 48 49 50 51 52 53 54 55 56 57 58 59
53 - 67
Newest Items First
15 Per Page
SENS-ADXL346 Triaxial Acceleration Sensor Module Accelerometer I2C SPI IIC ADXL346
US$9.96
The ADXL346 is well suited for mobile device applications. It measures the use of static gravity acceleration in tilt sensing applications, as well as the acceleration of dynamic acceleration motion or vibration caused by its high resolution (4mg / LSB) can be measured tilt change is less than 1 degrees of inclination.
In stock
+ −
Add to wish list
40 Pin GPIO Extension Cable for any 2x20 Pin Raspberry Pi - 150mm / 6" long
US$4.54
Unlike the 'classic' Raspberry Pi computers, you can't really stick a HAT, bonnet, pHAT or other accessory/add-on on top...what to do? Give up!? NO! Use this cable, which will act as an extender for all 40 pins to give you a stretch of about 150mm / 6 inches. Simply plug the socket side into the Raspberry Pi with the white mark next to the Pin 1 label. Then on the other side, plug the hat down onto the plug side.
Delivery within 2-3 weeks
+ −
Add to wish list
2x20 Socket Riser Header for Raspberry Pi HATs and Bonnets
US$3.17
Give yourself a lift with this 2x20 female socket header that has slightly longer than usual pins. You can plug this into your Raspberry Pi GPIO port and then plug a HAT or Bonnet or Phat on top. Especially useful for Bonnets that have slim headers on the bottom, but you want them to clear some of the components on the Pi, or fit into a case nicer.
Delivery within 2-3 weeks
+ −
Add to wish list
IMX219-160 8MP IR-CUT Camera, 162° FOV, IR-CUT Infrared, Applicable For Jetson Nano / Compute Module
US$40.81
IMX219 sensor, 8MP, comes with infrared LEDs. Embedded IR-CUT, eliminating the reddish issue of normal IR cameras on daylight.
In stock
+ −
Add to wish list
Quality 3-Ch Relay Expansion Board Designed For Jetson Nano, Optocoupler Isolation
US$23.59
Standard 40PIN GPIO header, directly pluggable onto the Jetson Nano. Incorporate quality relay component, max load: ≤5A 250V AC or ≤5A 30V DC. Optocoupler isolation, prevent interference from the high voltage circuitry. Indicators for monitoring the relay operating status. Control pins of relays are configurable via jumpers.
In stock
+ −
Add to wish list
Raspberry Pi 400 GPIO Header Adapter, Header Expansion
US$5.45
Raspberry Pi 400 GPIO Header Adapter, Header Expansion Raspberry Pi GPIO adapter   Designed for Raspberry Pi 400     Color-coded...
In stock
+ −
Add to wish list
Raspberry Pi 400 GPIO Header Adapter, Header Expansion, 2x 40PIN Header
US$7.23
Raspberry Pi 400 GPIO Header Adapter, Header Expansion, 2x 40PIN Header Raspberry Pi GPIO adapter   Designed for Raspberry Pi 400...
In stock
+ −
Add to wish list
USB Sound Card, Driver-Free, for Raspberry Pi / Jetson Nano
US$11.77
Recording and playback support, stereo codec, built-in microphone and speaker. Suitable for Raspberry Pi / Jetson Nano. Driver-free, Plug and Play.
In stock
+ −
Add to wish list
USB 3.2 Gen1 HUB HAT for Raspberry Pi, 4x USB 3.2 Gen1 Ports, Driver-Free
US$25.41
This is a driver-free 4 ports USB 3.2 Gen1 hub HAT for Raspberry Pi, provides more USB capability to your Pi, make it easy to connect more USB devices. The HAT features standard Raspberry Pi 40PIN GPIO extension header, when working with Raspberry Pi 4, the USB 3.2 Gen1 ports is able to provide up to 5 Gbps data rate, which means 10 times faster than USB 2.0.
In stock
+ −
Add to wish list
High-Precision AD HAT For Raspberry Pi, ADS1263 10-Ch 32-Bit ADC
US$68.20
Adopts ADS1263 chip, low noise, low temperature drift, 10-ch 32-bit high precision ADC (5-ch differential input), 38.4kSPS Max sampling rate with embedded 24-bit auxiliary ADC, internal ADC test signal, IDAC, 2.5V internal reference voltage, 8x multiplexing GPIO, PGA (32 times Max).
In stock
+ −
Add to wish list
EF08239, ELECFREAKS micro:bit 32 IN 1 Wonder Building Kit, Programmable K12 Educational Learning Kit with Building Blocks/Sensors/Wukong Expansion Board
US$127.17
The ELECFREAKS micro:bit 32 IN 1 Wonder Building Kit focuses on expanding the blocks with 32 projects available on the WIKI, giving you more options to create more projects. It is equipped with various electronic sensors such as a line tracking sensor, Sonar:bit, water level sensor, etc. to add more challenge and fun to your projects.
In stock
+ −
Add to wish list
DEV-16129 SparkFun controller:bit - micro:bit Carrier Board (Qwiic)
US$19.52
The SparkFun controller:bit is a fun-filled "carrier" board for the micro:bit that, when combined with the micro:bit, provides you with a fully functional controller system.
In stock
+ −
Add to wish list
EF08252, micro:bit Smart City Kit (Without micro:bit board)
US$77.12
The EF08252 is a kit of sensors for the Micro:bit. It comes with several useful sensors like a water level sensor and even comes with IoT capabilities. Learn how to code and facilitate your everyday life at the same time!
In stock
+ −
Add to wish list
PI4-SWITCH Raspberry Pi 4 USB-C Power Cable, 5V / 3A
US$4.50
  • This product is designed for the power adapter of the for Raspberry pi 4.
  • Also suitable for mini TV, 2.5 inch mobile hard disk, mobile DVD, TV box, wireless audio and video equipment, charging equipment, MP3/MP4, small table lamp, routerswitch, game console, telephone, lantern, camera, surveillance Equipment, controllers, etc. Especially suitable for all kinds of household / portable devices with fiber optic modem and routers.
  • 5 V, 3A output can also make your raspberry vibrant.
  • New type-c interface output wire.
  • Bronze tinned copper core, anti-interference, shielding, fast charging, stable transmission.
In stock
+ −
Add to wish list
DC-5300-USB 5V 3A Adapter US Plug
US$7.27
  • Compact design can be used for travel or home.
  • Lightweight and portable, easy installation.
  • 100 ～ 240V voltage for different country and district use.
  • Made of eco-friendly PC material, to ensure the long using time.
In stock
+ −
Add to wish list
37 - 51
45 46 47 48 49 50 51 52 53 54 55 56 57 58 59
53 - 67