Our Brands

Development Boards

25 - 39
33 34 35 36 37 38 39 40 41 42 43 44 45 46 47
41 - 55
Newest Items First
15 Per Page
4062-ADA Adafruit Feather nRF52840 Express
US$36.35
This chip has twice the flash, and four times the SRAM of its earlier sibling, the nRF52832 - 1 MB of FLASH and 256KB of SRAM. Compared to the nRF51, this board has 4-8 times more of everything. For this chip, we've added Arduino IDE support - you can program the nRF52840 chip directly to take full advantage of the Cortex-M4 processor, and then calling into the Nordic SoftDevice radio stack when you need to communicate over BLE. Since the underlying API and peripherals are the same for the '832 and '840, you can supercharge your older nRF52832 projects with the same exact code, with a single recompile!
In stock
+ −
Add to wish list
4500-ADA Adafruit CLUE - nRF52840 Express with Bluetooth LE
US$59.10
Get a CLUE here at Adafruit by picking up this sensor-packed development board. We wanted to build some projects that have a small screen and a lot of sensors. To make it compatible with existing projects, we made it the same shape and size as the BBC micro:bit and with the same edge-connector on the bottom with 5 big pads so it will fit into your existing robot kit or 'bit add-on.
Delivery within 2-3 weeks
+ −
Add to wish list
CRT13450K ESP8266 IOT Weather Station Kit
US$45.27
This ESP8266 IOT Weather Station Kit is based on esp8266 wifi function to achieve remote data transmission products, through the three sensors to collect temperature and humidity information and to achieve water droplets detection And UV intensity testing. Three sensor performance is very good, the first Crowtail- temperature & humidity sensor, which uses DHT11 sensor can simultaneously measure the temperature and humidity and then digital signal output. The water flow sensor can detect whether the outside is raining, and the last uv sensor can detect the UV intensity in the current environment.
In stock
+ −
Add to wish list
Raspberry Pi Build HAT
US$40.72
The Raspberry Pi Build HAT combines the power of Raspberry Pi computing with LEGO® hands-on learning to enable a fun and creative learning experience for students, teachers and makers. The Raspberry Pi Build HAT is an add-on board designed in collaboration with LEGO® Education to make it easy to control LEGO® Technic™ motors and sensors with Raspberry Pi computers.
 
In stock
+ −
Add to wish list
48W Power Supply for Build HAT
US$26.16
Power your Raspberry Pi Build HAT projects with the Raspberry Pi Build HAT Power Supply. This 48W power supply will power the Build HAT and connected LEGO® TechnicTM motors, as well as your Raspberry Pi computer.
In stock
+ −
Add to wish list
WAVE-20818, 8.8inch IPS Side Monitor, 480×1920, HDMI, HiFi Speaker, No Touch
US$145.37
The WAVE-20818 is an 8.8inch IPS Side Monitor. It has a resolution of 480×1920 and carries an HDMI port and a HiFi Speaker. It's compatible with Raspberry Pi, Jetson nano and PC.
In stock
+ −
Add to wish list
WAVE-20869, RPi FPC Camera (B) for Raspberry Pi, OV5647, 5MP, Mini Size
US$27.07
The WAVE-20869 is a mini-sized camera module designed for the Raspberry pi. It's a 5-megapixel camera able to capture photos and video with variable resolution and frame rate.
In stock
+ −
Add to wish list
WAVE-21020, 10.1inch HD Capacitive Touch Screen LCD (G), 1920×1200, HDMI, IPS, Fully Laminated Screen
US$199.97
The WAVE-21020 is a 10.1inch Capacitive Touch, fully laminated, LCD Screen. It has a resolution of1920x1200, supports HDMI, IPS and 10-Points Touch and it's compatible with Raspberry Pi, Jetson Nano, And PC.
In stock
+ −
Add to wish list
RF Nano V3.0 ATMEGA328P + NRF24I01 2.4G Wireless
US$22.70
This product named Nano has the same processing power as an Uno but has a smaller form factor. Based on the ATmega328P microprocessor. Specifications: Microcontroller: ATMEL ATmega328p. Operating Voltage (Logic Level): 5VDC. Input Voltage on RAW pin (recommended): 7 ~ 12VDC. Input Voltage on RAW pin (Limit): 6 ~ 20VDC. Digital I/O Pins: 14 (6 can provide PWM output). Analog Input Pins: 8. DC Current per I/O Pin: 40mA. Flash Memory: 32KB (2KB is used for bootloader). SRAM: 2KB. EEPROM: 1KB. Clock Speed: 16MHz.
In stock
+ −
Add to wish list
DFR0699 Gravity: I2C Voice Recorder Module EDU
US$17.25
Gravity: I2C Voice Recorder Module EDU is DFRobot all-in-one voice interaction module, which integrates recording and playback functions into one. It can record with one button, and also supports Gravity: I2C interface for recording and playback by microcontroller. And support number synthesis reading function, simple programming can be directly broadcast temperature, humidity, voltage, time and other data, support headphones or speaker output, built-in amplifier plug and play.
Delivery within 2-3 weeks
+ −
Add to wish list
WRL-18034 ESP32-C3 WROOM Module - 4MB (PCB Antenna)
US$5.41
The Espressif ESP32-C3 is the next version of the popular ESP32 Bluetooth® and WiFi enabled module. This module features a single core, RISC-V-based processor with WiFi and Bluetooth LE 5.0 radios built into the SoC. The module features a PCB antenna and castellated plated pins for surface-mount soldering. This variation has 4 MB of on-board SPI flash and is the 85 °C temperature tolerant version.
Delivery within 2-3 weeks
+ −
Add to wish list
DEV-18615 Ethernet Kit for Teensy 4.1
US$5.49
The Ethernet Kit for Teensy 4.1 from PJRC includes an Ethernet MagJack connector, a bare circuit board, one ribbon cable, two headers, and a capacitor. As this is a kit that require assembly, some beginner-level soldering is required.
In stock
+ −
Add to wish list
3671-ADA Adafruit CSI or DSI Cable Extender for Raspberry Pi
US$4.32
The Adafruit CSI or DSI Cable Extender for Raspberry Pi t lets you connect two 15-pin 1.0mm pitch cables end-to-end and extend the length.
In stock
+ −
Add to wish list
DFR0914 4-Channel Level Converter (12V to 5V), Din Rail
US$14.51
This 12V to 5V level converter module with 4-channel Optocoupler isolation features common anode / common cathode / differential signal inputs. The level shifter translates signal level from 12V to 5V and offers PNP output (NPN to PNP available). It can be used for signal isolation, PLC signal level conversion, NPN to PNP signal conversion, polarity conversion, signal level voltage conversion and so on.
In stock
+ −
Add to wish list
DFR0913 4-Channel Level Converter (12V to 3.3V), Din Rail
US$13.60
This 12V to 3.3V level converter module with 4-channel Optocoupler isolation features common anode / common cathode / differential signal inputs. The level shifter translates signal level from 12V to 3.3V and offers PNP output (NPN to PNP available). It can be used for signal isolation, PLC signal level conversion, NPN to PNP signal conversion, polarity conversion, signal level voltage conversion and so on.
In stock
+ −
Add to wish list
25 - 39
33 34 35 36 37 38 39 40 41 42 43 44 45 46 47
41 - 55