Our Brands

Development Boards

13 - 27
21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
29 - 43
Newest Items First
15 Per Page
WAVE-23967 M12 High Resolution Lens, 12MP, 160° FOV, 3.2mm Focal length, Compatible with Raspberry Pi High Quality Camera M12
US$36.26
WS1603212 Is An M12 Lens With 12MP High Resolution And 160° FOV, High Quality Metal Material. Suitable For M12 Mount Camera Module Such As Raspberry Pi HQ Camera M12. Note: the M12 mount camera module is NOT included, please purchase it separately.
In stock
+ −
Add to wish list
WAVE-23968 M12 High Resolution Lens, 12MP, 69.5° FOV, 8mm Focal length, Compatible with Raspberry Pi High Quality Camera M12
US$36.26
WS0698012 Is An M12 Lens With 12MP High Resolution And 69.5° FOV, 8mm Long Focal Length, 1.8 Large Aperture, High Quality Metal Material. Suitable For M12 Mount Camera Module Such As Raspberry Pi HQ Camera M12. Note: the M12 mount camera module is NOT included, please purchase it separately.
In stock
+ −
Add to wish list
MOD-XH-M543 120W Dual Channel Power Amplifier Module, 24V
US$13.42

This is the XH-M543 dual channel digital 120W power amplifier board which is run by the TPA3116D2 chip.

In stock
+ −
Add to wish list
WAVE-23966 M12 High Resolution Lens, 16MP, 105° FOV, 3.56mm Focal length, Compatible with Raspberry Pi High Quality Camera M12
US$11.78
WS1053516 Is An M12 Lens With 16MP High Resolution And 105° FOV. Suitable For M12 Mount Camera Module Such As Raspberry Pi HQ Camera M12.
In stock
+ −
Add to wish list
WAVE-23965 M12 High Resolution Lens, 12MP, 113° FOV, 2.7mm Focal length, Compatible with Raspberry Pi High Quality Camera M12
US$14.33

WS1132712 Is An M12 Lens With 12MP High Resolution And 113° FOV. Suitable For M12 Mount Camera Module Such As Raspberry Pi HQ Camera M12.

In stock
+ −
Add to wish list
WAVE-23775 CAN bus Module (B) for Raspberry Pi Pico, enabling long range communication through SPI
US$25.89

Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series boards. Features CAN function, adopts SPI interface CAN controller MCP2515 with transceiver SIT65HVD230DR. Comes with online development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples).

In stock
+ −
Add to wish list
5637-ADA Adafruit QT 5V to 3V Level Shifter Breakout - STEMMA QT / Qwiic
US$5.14
The STEMMA QT connectors on either side are compatible with the I2C connectors. This allows you to make solderless connections between your development board and the QT Shifter or to chain it with a wide range of other sensors and accessories using a compatible cable.
Delivery within 2-3 weeks
+ −
Add to wish list
5300-ADA Adafruit ESP32-S2 TFT Feather - 4MB Flash, 2MB PSRAM, STEMMA QT
US$38.90
This feather comes with native USB and 4 MB flash + 2 MB of PSRAM, so it is perfect for use with CircuitPython or Arduino with low-cost WiFi. Native USB means it can act like a keyboard or a disk drive. WiFi means its awesome for IoT projects. And Feather means it works with the large community of Feather Wings for expandability.
Delivery within 2-3 weeks
+ −
Add to wish list
MB-CASE-V2 Acrylic Transparent Case Clear Enclosure for Micro:bit V2
US$2.72
This case is designed specifically for the latest Micro-Bit version 2.
In stock
+ −
Add to wish list
MOD-74HC595-B Four Red Seven Segment Display Breakout Board
US$6.36
This is a simple board with four Seven Segment Display soldered onto the board and some through holes for soldering pins. This board has two shift registers, SM74HC595D to drive each seven segment display reducing the amount of wiring you need to have the displays functional. The only wiring you need to do is supply 5v, GND, SDI to pin 8 on Arduino, SCLK to pin 10 and LOAD to pin 9 on Arduino. You can also daisy chain these displays by connecting P2 to the new board P1.
In stock
+ −
Add to wish list
WAVE-23730 General Driver board for Robots, Based on ESP32, multi-functional, supports WIFI, Bluetooth and ESP-NOW communications
US$45.36
Based on the ESP32-WROOM-32 module, supports wireless communication such as WIFI, Bluetooth and ESP-NOW. Onboard motor control interfaces for 2x DC motor with encoder or 4x DC motor (2 groups) without encoder. Onboard serial bus servos control interfaces for controlling up to 253 ST3215 serial bus servos and obtaining servos feedback. Onboard 9-axis IMU to obtain attitude and heading information at any time. Supports 7~13V power input, and can be powered directly by 2S or 3S lithium battery module. Automatic download circuit for easy uploading programs.
In stock
+ −
Add to wish list
MOD-74HC595-A Three Red Seven Segment Displays Breakout Board
US$5.45
This is a simple board with three Seven Segment Display soldered onto the board and some through holes for soldering pins. This board has two shift registers, SM74HC595D to drive each seven segment display reducing the amount of wiring you need to have the displays functional. The only wiring you need to do is supply 5v, GND, SDI to pin 8 on Arduino, SCLK to pin 10 and LOAD to pin 9 on Arduino. You can also daisy chain These displays by connecting P2 to the new board P1.
In stock
+ −
Add to wish list
WAVE-24019 Flexible And Expandable Off-Road Tracked UGV, Multiple Hosts Support, With External Rails and ESP32 Slave Computer
US$362.86
The UGV01 series is a tracked mobile robot chassis, which features superb off-road crossing ability and anti-vibration performance, open source all code for secondary development. It supports multiple host computers (Raspberry Pi, Jetson Nano, etc), the host computer can communicate with the ESP32 slave computer through the serial port. The motor with encoder can obtain the speed feedback for closed-loop speed control.
Delivery within 2-3 weeks
+ −
Add to wish list
WL-TTGO-7000G, LILYGO T-SIM7000G ESP32 (LTE, GPRS, GPS) SIM Development Board WiFi Bluetooth, 16MG
US$81.67
The LILYGO T-SIM7000G ESP32 development board combines the ESP32 chip, the SIM7000G module, microSD card slot, battery holder, and solar panel charging circuit on the same board.
In stock
+ −
Add to wish list
WL-TTGO-7000G-S, 915MhZ LORA TTGO Shield for T-SIM7000G Module
US$34.08
915MhZ LORA TTGO Shield for T-SIM7000G Module This is a LORA TTGO shield module used with the T-SIM7000G. The 915 MHz antenna needs to be connected...
In stock
+ −
Add to wish list
13 - 27
21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
29 - 43