Our Brands

Development Boards

6 - 20
14 15 16 17 18 19 20 21 22 23 24 25 26 27 28
22 - 36
Newest Items First
15 Per Page
DFR0706-EN UNIHIKER - IoT Python Single Board Computer with Touchscreen
US$154.47
UNIHIKER is a single-board computer that brings you brand new experience. It features a 2.8-inch touchscreen, Wi-Fi and Bluetooth. It is equipped with light sensor, accelerometer, gyroscope and microphone. With built-in co-processor, it is able to communicate with various analog/digital/I2C/UART/SPI sensors and acuators.
In stock
+ −
Add to wish list
DFR0975 FireBeetle 2 Board ESP32-S3 (N16R8) AIoT Microcontroller with Camera (Wi-Fi & Bluetooth on Board)
US$31.80
FireBeetle 2 ESP32-S3 is a high-performance main controller built around the ESP32-S3-WROOM-1-N16R8 module. ESP32-S3-WROOM-1-N16R8 comes with 16MB Flash and 8MB PSRAM for storing more data. The acceleration for neural network computing and signal processing workloads provided by the ESP32-S3 chip makes the module an ideal choice for a wide variety of applications, such as speech recognition, image recognition, and so on.
In stock
+ −
Add to wish list
DFR0975-U FireBeetle 2 Board ESP32-S3-U (N16R8) AIoT Microcontroller with Camera (Wi-Fi & Bluetooth Routed through Cable)
US$33.17
FireBeetle 2 ESP32-S3-U is a high-performance main controller built around the ESP32-S3-WROOM-1U-N16R8 module. ESP32-S3-WROOM-1U-N16R8 comes with 16MB Flash and 8MB PSRAM for storing more data. The acceleration for neural network computing and signal processing workloads provided by the ESP32-S3 chip make the module an ideal choice for a wide variety of applications, such as speech recognition, image recognition, and so on.
In stock
+ −
Add to wish list
TEL0150 Gravity: CAN to TTL Communication Module with SLCAN Protocol
US$35.26
This is a CAN-to-UART and USB 1.0 communication module that is compatible with both 3.3V and 5V. It supports the CAN 2.0 protocol and incorporates the SLCAN command, eliminating the need for you to concern yourself with the complexities of the CAN protocol. By simply sending AT commands, you can engage in CAN data transmission and configure its functionalities.
In stock
+ −
Add to wish list
DFR0972 Gravity: I2C 4-20mA DAC Module (Arduino Compatible)
US$18.15
This is an I2C DAC module that outputs 0-25mA current. It offers a more accurate 4-20mA current output after calibration, which can be used with most 4-20mA devices on markets such as motors, inverters, valves, pumps, etc., by Arduino programming.
In stock
+ −
Add to wish list
410-415 Analog Discovery 3: 125 MS/s USB Oscilloscope, Waveform Generator, Logic Analyzer, and Variable Power Supply
US$541.22
Digilent’s latest multi-function test and measurement device, also known as the AD3, is a digital oscilloscope, logic analyzer, waveform generator, pattern generator, and much more. Using the flexible WaveForms software (supported by Windows, Mac, and Linux), the Analog Discovery 3 can be used in the lab, in the field, or even at home - you're no longer tied down to a traditional benchtop and stacks of expensive test instruments.
In stock
+ −
Add to wish list
AM-JOYSTICK2, Dual Joystick Stacking Shield for Arduino UNO, Arduino MeArm Controller
US$6.78
Looking for a 2 axis joystick with a push button for your project, want to create your own remote control or arcade device? This unit will provide all that on a breakout board simple to connect to any microcontroller and start working on your project!
In stock
+ −
Add to wish list
DFR0979 Gravity: CH423 I2C 24 Digital IO Expansion Module
US$8.87
This IO expansion board based on the CH423 chip extends 24 digital ports via I2C, including 8 GPIOs with interrupt functions and 16 GPOs. CH423 has a built-in current drive circuit that offers a 15mA continuous drive current, which can statically drive 24 LED tubes or dynamically drive 128 LEDs. This CH423 I2C to GPIO IO expander is suitable for projects involving LED tubes, dot matrix screens, light cubes, etc.
In stock
+ −
Add to wish list
MOD-AD623, AD623 AC/DC High Precision Small Voltage Signal Amplifier Module
US$13.42
AD623 AC/DC High Precision Small Voltage Signal Amplifier Module This device uses an AD623 as an amplifier that is capable of amplifying small voltage...
In stock
+ −
Add to wish list
E32S319ST MaTouch_ESP32-S3 Parallel TFT with Touch 1.9" ST7789V2
US$45.27
This cute 1.9" display is for IoT applications, it features Wifi/ WiFi& Bluetooth 5.0 + BT mesh, with ESP32-S3R8 Dual-core LX7 microprocessor. This display can be powered by USB or directly by lipo battery, there on-board charger. Also there 2 expansion connectors, with UART/ADC. The colorful display resolution is 320*170, with capacitive touch, which could be a proper solution for IoT applications.
In stock
+ −
Add to wish list
E32S3128GC MaTouch_ESP32-S3 Round SPI TFT with Touch 1.28"
US$40.72
The ESP32-S3 round display with touch can be a great tool for your applications such as smartwatch. We selected the ESP32-S3 generation as the controller, with 16MB Flash and 8MB PSRAM, enough for most IOT applications; The round display is 240x240 resolution 1.28", colorful RGB, with capacitive touch, it communicates with ESP32 with SPI interface, so there enough GPIO left for expansion applications.
In stock
+ −
Add to wish list
MNK00093 MonkMakes Pico Proto PCB for Raspberry Pi Pico
US$4.50
If you liked our Breadboard for Pico and are ready to take your prototype to solder, you will love this board. This prototyping board is inspired by the MonkMakes Breadboard for Pico and has all the Pico's pin names on the PCB.
In stock
+ −
Add to wish list
MNK00085 MonkMakes Slider for micro:bit
US$13.42
The MonkMakes Slider for micro:bit allows you to interact with your micro:bit by sliding a control left and right. The kit includes the Slider for micro:bit itself plus a set of 5 alligator clip leads. Comprehensive instructions with example projects are provided as a free download.
In stock
+ −
Add to wish list
MNK00084 MonkMakes Connector for micro:bit
US$7.97
The MonkMakes Connector for micro:bit makes it super-easy to connect I2C, SPI and other devices to your micro:bit without losing the main connector rings.
In stock
+ −
Add to wish list
WAVE-24654 SX1262 LoRaWAN Node Module Expansion Board for Raspberry Pi, With Magnetic CB antenna, frequency: 868/915MHz With GNSS Function
US$36.35
This series of products are LoRa modules using the new generation of SX1262 RF chip, with the features of long communication distance and strong anti-interference ability. Suitable for Sub-GHz frequency band network, and is available in LF (410~510MHz) or HF (850~930MHz) frequency band versions. Combined with a LoRa gateway, it can be connected to servers such as TTN to build a LoRaWAN network. In addition to the basic LoRaWAN version, it also provides optional GNSS positioning function with GPS/BD support.
In stock
+ −
Add to wish list
6 - 20
14 15 16 17 18 19 20 21 22 23 24 25 26 27 28
22 - 36