Our Brands

Development Boards

1 - 14
8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
16 - 30
Newest Items First
15 Per Page
WAVE-27710 PCIe To 2-Ch M.2 Adapter Type B for Raspberry Pi 5, Compatible with 2280 / 2260 / 2242 / 2230 size NVMe Protocol M.2 SSD, Raspberry Pi 5 NVMe HAT
US$31.62
Based on 16PIN PCIe Interface of Raspberry Pi 5. Dual NVMe Solid State Drives Support. Compatible With 2280 / 2260 / 2242 / 2230 Size M.2 Solid State Drives. Supports PCIE X1 Gen2 Only, Supports Booting PI5 From Solid State Drive.
In stock
+ −
Add to wish list
WAVE-27932 ESP32-S3 1.69inch Display Development Board, 240MHz Dual-Core Processor, 240×280 Pixels, Supports WiFi/Bluetooth, Micro LCD Display With ESP32-S3
US$27.25
ESP32-S3-LCD-1.69 is a low-cost, high-performance MCU board designed by Waveshare, embedded with 240MHz dual-core processor, tiny size, with onboard 1.69inch 262K LCD display, Lithium battery recharge manager, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope), WiFi/Bluetooth antenna, RTC, and so on, which makes it easy for you to develop and integrate it into products quickly.
In stock
+ −
Add to wish list
WAVE-27966 UPS HAT (E) for Raspberry Pi, Supports 4× 21700 Li batteries (NOT included), Bi-Directional Fast charging, 5V 6A Output, Pogo Pins Connector, Raspberry Pi UPS
US$54.55
Uninterruptible Power Supply for Raspberry Pi. Type-C Bi-Directional Fast charging, 5V 6A output. Supports charging and power output at the same time, onboard battery fuel gauge IC. Comes with online development resources and manual.
In stock
+ −
Add to wish list
PI5-SC1130 Raspberry Pi 5 Official Camera Cable - 500mm
US$7.23
This is a 200mm camera cable for use with MIPI displays and the Raspberry Pi 5. The Raspberry Pi 5 provides two four-lane MIPI connectors, each of which can support either a camera or a display. These connectors use the same 22-way, 0.5mm-pitch “mini” FPC format as the Compute Module Development Kit, and require adapter cables to connect to the 15-way, 1mm-pitch “standard” format connectors on our current camera and display products.
In stock
+ −
Add to wish list
PI5-SC1133 Raspberry Pi 5 Display Cable - 500mm
US$6.78
This is a 200mm display cable for use with MIPI displays and the Raspberry Pi 5. The Raspberry Pi 5 provides two four-lane MIPI connectors, each of which can support either a camera or a display. These connectors use the same 22-way, 0.5mm-pitch “mini” FPC format as the Compute Module Development Kit, and require adapter cables to connect to the 15-way, 1mm-pitch “standard” format connectors on our current camera and display products.
In stock
+ −
Add to wish list
Raspberry Pi 5 Basic Starter Kit - 4GB
US$145.37
This Raspberry Pi5 8GB Basic Starter Kit includes a Raspberry PI 5 with a Raspberry Pi case, a 64GB blank SD Card,, a 5.1 VDC 5A USB Type-C Wall Adapter, and a micro-HDMI to HDMI conversion cable.
In stock
+ −
Add to wish list
Raspberry Pi 5 Basic Starter Kit - 8GB
US$181.77
This Raspberry Pi5 8GB Basic Starter Kit includes a Raspberry PI 5 with a Raspberry Pi case, a 64GB blank SD Card,, a 5.1 VDC 5A USB Type-C Wall Adapter, and a micro-HDMI to HDMI conversion cable.
In stock
+ −
Add to wish list
Arduino UNO Educational Kit with Official UNO R4 WiFi
US$117.16
This is ABRA's very own Arduino R4 WiFi Educational Kit, a comprehensive instructional package containing a ton of components with an online PDF manual to...
In stock
+ −
Add to wish list
WAVE-27670 Power Over Ethernet HAT (G) For Raspberry Pi 5, 5V 5A Output, Supports 802.3af/at Network Standard, Raspberry Pi 5 PoE HAT
US$25.16
The PoE HAT (G) is an IEEE 802.3af/at-compliant PoE (Power Over Ethernet) HAT for Raspberry Pi 5. By using with a PoE router or switch that supports the IEEE 802.3af/at network standard, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
In stock
+ −
Add to wish list
5972-ADA Adafruit Switchable USB Type A to C Breakout Board
US$10.69
With this board, you can manually switch each of the 4 wires on or off for a variety of uses: If you want to have a 'charge only' device, simply switch the D+ and D- lines off. For power monitoring, you can do high side (disable the V+ line) or low side (disable the GND line). For tapping into the USB signal, or monitoring the power voltage, keep all the switches on and probe the labelled pads on either side.
In stock
+ −
Add to wish list
PI5-SC1166 Raspberry Pi M.2 HAT for Pi 5
US$22.70
The Raspberry Pi M.2 HAT+ enables you to connect M.2 peripherals such as NVMe drives and AI accelerators to Raspberry Pi 5’s PCIe 2.0 interface, supporting fast (up to 500 MB/s) data transfer to and from NVMe drives and other PCIe accessories.
In stock
+ −
Add to wish list
WAVE-27631, 21.5inch Capacitive Touch Display, 1080×1920 Full HD, Optical Bonding Toughened Glass Panel, Supports Raspberry Pi / Jetson Nano (US Plug)
US$353.76
21.5″ Capacitive Touch Display. Industrial Quality, Suitable For Industrial, Commercial, And Medical Applications, Etc.
In stock
+ −
Add to wish list
WAVE-27541 PCIe To Gigabit Ethernet And USB 3.2 Gen1 HAT For Raspberry Pi 5, 3x USB 3.2 Gen1, 1x Gigabit Ethernet, Driver-Free, Plug And Play, Raspberry Pi 5 PCIe HAT
US$44.36
PCIe TO GigE & USB HUB HAT. PCIe To Gigabit Ethernet And USB 3.2 Gen1. Designed For Raspberry Pi 5, Driver-Free, Plug And Play.
In stock
+ −
Add to wish list
WAVE-27580 PCIe To M.2 Mini Adapter for Raspberry Pi 5, Supports NVMe Protocol M.2 Solid State Drive, High-speed Reading/Writing, Raspberry Pi 5 NVMe HAT
US$10.69
PCIe To M.2 Mini Adapter. Designed for Raspberry Pi 5. Adapter For NVMe Protocol M.2 Solid State Drive, High-Speed Reading/Writing.
In stock
+ −
Add to wish list
WAVE-27577 Serial Bus Servo Driver HAT, Integrates ESP32 and Servo Control Circuit, Suitable for ST / RSBL Series Serial Bus Servos
US$31.80
Allows controlling up to 253 ST / RSBL series serial bus servos at the same time. 9~25V wide voltage input (the input voltage and the servo voltage must be matched). Based on the ESP32-WROOM-32 module, supports wired and wireless communication. Provides multiple control demos for different host controllers. Supports controlling the serial bus servos directly via onboard USB Type-C port.
In stock
+ −
Add to wish list
1 - 14
8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
16 - 30