Our Brands

Development Boards

123 - 137
131 132 133 134 135 136 137 138 139 140 141 142 143 144
Newest Items First
15 Per Page
PRT-09279 Stackable Header - 8 Pin
PRT-09279 Stackable Header - 8 Pin
US$1.06
This is a 8 pin stackable header with extra long pins. Pins are spaced by 0.1".
In stock
+ −
Add to wish list
DEV-08353 PICAXE-28X Starter Pack
DEV-08353 PICAXE-28X Starter Pack
US$53.13
Everything you need to get started with 28 pin PICAXE microcontrollers! Kit Includes: PICAXE 28X1 IC. PCB and Parts. Interface cables. Battery Holder. Software CD.
In stock
+ −
Add to wish list
163 ADXL335 - 5V ready 3-Axis Accelerometer (+-3g analog output)
163 ADXL335 - 5V ready 3-Axis Accelerometer (+-3g analog output)
US$26.17
Runs from 1.8-3.6 volts (3.3 is suggested), with ratiometric output. That means that 0g measurement output is always at half of the supply voltage Vdd, -3g is at 0v and 3g is at Vdd with full scaling in between. 0.75"x0.75".
In stock
+ −
Add to wish list
COM-10803 PICAXE 08M2 Microcontroller Chip
COM-10803 PICAXE 08M2 Microcontroller Chip
US$4.92
This is a 8 pin dip programmed flash microcontroller chip. PICAXE is a neat entry-level microcontroller system that is relatively cheap to get started with. The chip is programmed with a simple serial connection and the BASIC development environment is free! 
In stock
+ −
Add to wish list
COM-10807 PICAXE 20M2 Microcontroller Chip
COM-10807 PICAXE 20M2 Microcontroller Chip
US$9.73
This is a 20 pin dip programmed flash miconcontroller chip. PICAXE is a neat entry-level microcontroller system that is relatively cheap to get started with. The chip is programmed with a simple serial connection and the BASIC development environment is free!
Delivery within 2-3 weeks
+ −
Add to wish list
COM-09195 PICAXE-28X2 Microcontroller Chip
COM-09195 PICAXE-28X2 Microcontroller Chip
US$18.13
This is a 28 pin dip programmed flash microcontroller chip. PICAXE is a neat entry-level microcontroller system that is relatively cheap to get started with. The chip is programmed with a simple serial connection and the BASIC development environment is free!
In stock
+ −
Add to wish list
COM-08352 PICAXE 28X1 Microcontroller Chip
COM-08352 PICAXE 28X1 Microcontroller Chip
US$15.33
This is a 28 pin dip programmed flash microcontroller chip. PICAXE-28X1 microcontroller chip. Enhanced PICAXE28 chips with 8x memory and many additional features such as i2c bus support.
In stock
+ −
Add to wish list
74HC595 Shift Register 8-Bit
74HC595 Shift Register 8-Bit
US$0.69

The 74HC595 is a 16 pin dip 8-bit shift register integrated circuit.

In stock
+ −
Add to wish list
A000067 Arduino Mega 2560 Rev.3
A000067 Arduino Mega 2560 Rev.3
US$71.84
The Arduino Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. 
In stock
+ −
Add to wish list
A000064 Arduino Wireless Proto Shield
A000064 Arduino Wireless Proto Shield
US$23.03
The module can communicate up to 100 feet indoors or 300 feet outdoors (with line-of-sight). It can be used as a serial/usb replacement or you can put it into a command mode and configure it for a variety of broadcast and mesh networking options.
In stock
+ −
Add to wish list
CAB-10087 OBD-II to DB9 Cable
CAB-10087 OBD-II to DB9 Cable
US$15.43
This is a cable that will allow you to access the pins on your car's OBDII connector. It has an OBDII connector on one end and a DB9 female serial connector on the other.  The overall length of the cable is 5'.
In stock
+ −
Add to wish list
CAB-10215 USB microB Cable - 6'
CAB-10215 USB microB Cable - 6'
US$5.95
This is a 6 foot USB2.0 male type A to micro USB male B cable. Works great with the Raspberry Pi or Particle Photon.
In stock
+ −
Add to wish list
COM-08033 Button Pad 4x4 - Led Compatible
COM-08033 Button Pad 4x4 - Led Compatible
US$13.93
This is a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors are soldered to the back side of the PCB. We recommend trimming the connector leads on the button side as short as possible to reduce the deflection of the pad.
In stock
+ −
Add to wish list
TOL-10405 Needle Set
TOL-10405 Needle Set
US$2.73
This set of sewing needles is a must-have when stitching together your next e-textile project. Each envelope contains three 48mm, 1.23mm thick needles and two smaller 39mm, 0.67mm thick needles.
In stock
+ −
Add to wish list
RTL-10774 Touch Sensor Shield
RTL-10774 Touch Sensor Shield
US$22.33
The MPR121 IC is a great way to build simple capacitive touch interfaces, and now it's even easier to incorporate into your Arduino projects with the touch shield. The touch shield has 9 capacitive touch pads, with headers for the remaining 3 electrode connections.
In stock
+ −
Add to wish list
123 - 137
131 132 133 134 135 136 137 138 139 140 141 142 143 144