Our Brands

Development Boards

119 - 133
127 128 129 130 131 132 133 134 135 136 137 138 139 140 141
135 - 144
Newest Items First
15 Per Page
MCP3008-I/P 2.7V 4-Ch/8-Channel 10-Bit A/D Converters with SPI Serial Interface
MCP3008-I/P 2.7V 4-Ch/8-Channel 10-Bit A/D Converters with SPI Serial Interface
US$5.25
This is a 2.7 volt four channel or 8 channels 10-bit analog to digital converter (ADC) with a simple to use SPI interface.
In stock
+ −
Add to wish list
935 MCP4725 Breakout Board - 12-Bit DAC w/I2C Interface
935 MCP4725 Breakout Board - 12-Bit DAC w/I2C Interface
US$8.67
This breakout board features the easy-to-use MCP4725 12-bit DAC. Control it via I2C and send it the value you want it to output, and the VOUT pin will have it.
In stock
+ −
Add to wish list
954 USB to TTL Serial Cable - Debug / Console Cable for Raspberry Pi
954-ADA USB to TTL Serial Cable - Debug / Console Cable for Raspberry Pi
US$9.05

The cable is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port. Inside the big USB plug is a USB<->Serial conversion chip and at the end of the 36" cable are four wire - red power, black ground, white RX into USB port, and green TX out of the USB port. The power pin provides the 5V @ 500mA direct from the USB port and the RX/TX pins are 3.3V level for interfacing with the most common 3.3V logic level chipsets.

In stock
+ −
Add to wish list
862 GPIO Ribbon Cable for Raspberry Pi
862 GPIO Ribbon Cable for Raspberry Pi
US$4.70
It's 6" long and has 26 socket & wire sets. Pin #1 is marked with a red wire.
Delivery within 2-3 weeks
+ −
Add to wish list
Netduino Go Mainboard with Cables
Netduino Go Mainboard with Cables
US$69.93

The Netduino Go! is part of a new breed of 32-bit microcontrollers powered by powerful ARM-Cortex processors. It is programmable in C# or Visual Basic .Net. It has  has four times the speed (168MHz), six times the code space (384KB), and twice the available RAM (100KB+) of Netduino Plus. And with Netduino Go, we've virtualized all the peripherals.

In stock
+ −
Add to wish list
NetGo-Base Netduino Go Shield Base module
NetGo-Base Netduino Go Shield Base module
US$34.93
This Shield Base adds Arduino shield pin compatibility to your Netduino Go. Just plug it in and access InputPorts, OutputPorts, AnalogInputs, PWMs, and more using standard C# or Visual Basic code.
In stock
+ −
Add to wish list
NetGo-Button Netduino Go Button Module
NetGo-Button Netduino Go Button Module
US$6.93

This is a single button. The button class has three features, the pressed and released events, and the ButtonState property.

In stock
+ −
Add to wish list
NetGo-Pot Netduino Go Potentiometer Module
NetGo-Pot Netduino Go Potentiometer Module
US$11.13
This has a single potentiometer.
In stock
+ −
Add to wish list
NetGo-LED Netduino Go RGB LED Module
NetGo-LED Netduino Go RGB LED Module
US$13.93

This is a single RGB LED, a very bright one! The LED is set to only go up to 33% of its possible brightness.

In stock
+ −
Add to wish list
NetduinoGo-Kit Netduino Go Starter Kit
NetduinoGo-Kit Netduino Go Starter Kit
US$118.93

The Netduino Go Starter Kit is a plug and play component set with Arduino shield compatibility targeted towards education, but also popular with engineers and hobbyists. The Netduino Go Starter Kit includes: Netduino Go mainboard, Netduino Go Module Shield Base, Netduino Go Button Module, Netduino Go Potentiometer Module, Netduino Go RGB LED module, 4 Go Cables -3' microUSB Cable.

In stock
+ −
Add to wish list
COM-11289 Heating Pad - 5x15cm
COM-11289 Heating Pad - 5x15cm
US$7.81

These DC powered heating pads are perfect for near-body heating applications. They get warm to the touch but not too hot. Simply apply 5VDC to the wire leads and within minutes, the pad will begin to warm up.

In stock
+ −
Add to wish list
COM-11288 Heating Pad - 5x10cm
COM-11288 Heating Pad - 5x10cm
US$7.26

These DC powered heating pads are perfect for near-body heating applications. They get warm to the touch but not too hot. Simply apply 5VDC to the wire leads and within minutes, the pad will begin to warm up.

Delivery within 2-3 weeks
+ −
Add to wish list
DEV-10941 LilyPad SimpleSnap
DEV-10941 LilyPad SimpleSnap
US$41.93
The LilyPad SimpleSnap is a new, easy way to create e-textiles projects with LilyPad that are modular and can be disassembled or broken down, it's also a great way to prototype! The SimpleSnap board is similar to the LilyPad Simple board, and has the same functionality except for two major differences: A built-in rechargeable Lithium Polymer battery and female snap connectors.
In stock
+ −
Add to wish list
DEV-11364 LilyTwinkle
DEV-11364 LilyTwinkle
US$7.43
Even though it's as small as some of the LilyPad sensors, this board actually has an ATtiny microcontroller on it so it's actually pretty smart! Simply sew on 4 LEDs and connect a battery and the LEDs will twinkle-fade (a lot like fireflies... or lightning bugs, if that's what you call them).
In stock
+ −
Add to wish list
30016 Parallax Emic 2 Text-to-Speech Module
30016 Parallax Emic 2 Text-to-Speech Module
US$171.99

This is a multi-language voice synthesizer that converts a stream of digital text into natural sounding speech. Its simple command-based interface makes it easy to integrate into any embedded system. Features: High-quality speech synthesis for English and Spanish languages. Nine pre-defined voice styles comprising male, female, and child. Dynamic control of speech and voice characteristics, including pitch, speaking rate, and word emphasis.

Delivery within 2-3 weeks
+ −
Add to wish list
119 - 133
127 128 129 130 131 132 133 134 135 136 137 138 139 140 141
135 - 144