Our Brands

Development Boards

117 - 131
125 126 127 128 129 130 131 132 133 134 135 136 137 138 139
133 - 144
Newest Items First
15 Per Page
PRT-11490 Raspberry Pi - GPIO Shrouded Header (2x13)
PRT-11490 Raspberry Pi - GPIO Shrouded Header (2x13)
US$1.33
This has the same number and spacing of pins as the Raspberry Pi so you can easily connect via ribbon cable to the low-level peripherals and get hacking! 
In stock
+ −
Add to wish list
CAB-11489 Raspberry Pi - GPIO Ribbon Cable (6")
CAB-11489 Raspberry Pi - GPIO Ribbon Cable (6")
US$4.13

This 2x13 flat ribbon-cable fits the GPIO headers on the Raspberry Pi so you can easily connect to the low-level peripherals and get hacking! 

In stock
+ −
Add to wish list
1012 USB WiFi (802.11b/g/n) Module: For Raspberry Pi and more
1012 USB WiFi (802.11b/g/n) Module: For Raspberry Pi and more
US$26.17
Take advantage of the Raspberry Pi and Beagle Bone's USB port to add a low cost, but high-reliability wireless link.
In stock
+ −
Add to wish list
971 PS/2 Keyboard+Mouse to USB adapter
971 PS/2 Keyboard+Mouse to USB adapter
US$10.42
This is a nice solution to wanting to use PS/2 devices (such as our capacitive touch pad or magstripe readers). It's also handy if you want to connect a keyboard and mouse to a Raspberry Pi or Beagle Bone without taking up two USB ports.
In stock
+ −
Add to wish list
937 Panel Mount USB Cable - B Female to Micro-B Male
937 Panel Mount USB Cable - B Female to Micro-B Male
US$6.92
The jack half has two mounting 'ears' with M3 screws installed, 1 inch / 25.4mm apart. Can be used with box walls 0.125" to 0.25" wide. If you have a thinner-walled box, simply swap out the M3 screws for shorter ones. Entire cable is 6"/150mm long.
In stock
+ −
Add to wish list
1013 Stereo to RCA (Composite Audio) 3.5mm Cable 6 feet
1013 Stereo to RCA (Composite Audio) 3.5mm Cable 6 feet
US$5.17
This 6 foot long cable converts a standard 3.5mm stereo jack to two color-coded mono RCA coaxial jacks.
In stock
+ −
Add to wish list
ARD-102 Arduino UNO Basic Kit
US$32.99

Simply select the appropriate components, sensors and control elements for a project and experience the powerful Analog to Digital hardware interface and open source Processing Programming Language for Arduino Uno. Power for the Arduino is supplied through the USB cable while connected to a computer. 

In stock
+ −
Add to wish list
1063 Electret Microphone Amplifier - MAX4466 with Adjustable Gain
1063 Electret Microphone Amplifier - MAX4466 with Adjustable Gain
US$12.17
Add an ear to your project with this well-designed electret microphone amplifier. This fully assembled and tested board comes with a 20-20KHz electret microphone soldered on.
In stock
+ −
Add to wish list
DFR0205 DC-DC Power Module 25W
DFR0205 DC-DC Power Module 25W
US$14.88
This module provides the flexbility to power most application range from 3.6V- 25V.  You can choose 5V direct output voltage with the switch or adjust the output voltage by the blue&white resistor.
In stock
+ −
Add to wish list
TEL0044 DFRduino GPS Shield For Arduino (ublox LEA-5H)
TEL0044 DFRduino GPS Shield For Arduino (ublox LEA-5H)
US$172.50
The LEA-6H is a high performance stand-alone GPS and GALILEO receiver module designed to allow easy, straightforward migration from its LEA-4 predecessors. It features u-blox' KickStart weak signal acquisition technology, as well as flexible connectivity options. The LEA-6H comes with built-in Flash memory that enables firmware updates and the storage of specific configuration settings in a non-volatile RAM.
In stock
+ −
Add to wish list
DFR0060 Screw Shield For Arduino
DFR0060 Screw Shield For Arduino
US$13.93
The Arduino-Compatible Screw Shield is a terminal expansion board that can be screwed directly to the terminal on the thread and is reliable and convenient. It can be plugged into the Arduino controller. You can use this shield to save yourself from the bad port connection. Feel secure with this arduino-compatible screw shield.
In stock
+ −
Add to wish list
FIT0101 Prototyping Plate (Square)
FIT0101 Prototyping Plate (Square)
US$19.59
Basically you can put everything from Arduino board to sensors, even a motor on top of it.  It fits M2-M3 screws.
In stock
+ −
Add to wish list
DRI0009 2A Motor Shield For Arduino
DRI0009 2A Motor Shield For Arduino
US$25.13
This shield uses L298P chip which allow to drive two 7-12V DC motors with maximum 2A current. This shield can be directly mount onto standard Arduino Duemilanove and Arduino Mega.
In stock
+ −
Add to wish list
AXE020 PICAXE-28 Project Board
AXE020 PICAXE-28 Project Board
US$34.93
Supports 8 digital inputs, 8 darlington driver outputs and 4 analogue channels. Includes input/output ribbon cables (microcontroller not included). Add a L293D motor driver chip to add reversible motor output capabilities.
In stock
+ −
Add to wish list
AXE408KIT Instant Robot Shield (self assembly)
AXE408KIT Instant Robot Shield (self assembly)
US$32.13
This is designed to enable you to rapidly create a robot based upon a PICAXE-28X2 or Arduino controller. Simply push the shield onto your controller, connect your motors, sensors and servos and you can have a working robot within just a few minutes!
In stock
+ −
Add to wish list
117 - 131
125 126 127 128 129 130 131 132 133 134 135 136 137 138 139
133 - 144