Our Brands

Development Boards

115 - 129
123 124 125 126 127 128 129 130 131 132 133 134 135 136 137
131 - 145
Newest Items First
15 Per Page
640 Stainless Thin Conductive Thread - 2 ply - 23 meter/76 ft
640 Stainless Thin Conductive Thread - 2 ply - 23 meter/76 ft
US$10.86
This thread is 2 ply, a little thicker than every day polyester or cotton thread but still thin enough to be sewn by hand in medium-eye needles or with a sewing machine that can handle 'heavy' thread. Because it is strong and smooth, its ideal for any wearable/e-textile project.
In stock
+ −
Add to wish list
1126 Sewable Snaps - 5mm Diameter - Card of 24
1126 Sewable Snaps - 5mm Diameter - Card of 24
US$6.09
The small 5mm size of these tin-plated brass snaps means they fit perfectly on Flora's pads! Snaps make a great connector for wearables-- solder one side to the board and sew the other to your project with conductive thread! This card comes with 24 complete snaps (socket and stud pairs).
In stock
+ −
Add to wish list
1170 Magnetic Pin Back
1170 Magnetic Pin Back
US$3.01
These magnetic pin backs have two pieces: a metal bar with adhesive strip and a plastic piece with two strong rare-earth magnets. Affix the metal bar to your FLORA projects-- it's just the right size! Then attach your FLORA project to any garment without poking holes in your clothes.
Delivery within 2-3 weeks
+ −
Add to wish list
615 Needle set - 3/9 sizes - 20 needles
615 Needle set - 3/9 sizes - 20 needles
US$3.01
2 x #3 needles (0.04" x 1.75") (1mm x 45mm). 6 x #5 needles (0.0375" x 1.65") (0.95mm x 42mm). 8 x #7 needles (0.035" x 1.55") (0.9mm x 39mm). 4 x #9 needles (0.027" x 1.35") (0.7mm x 35mm).
In stock
+ −
Add to wish list
1085 ADS1115 16-Bit ADC - 4 Channel with Programmable Gain Amplifier
1085 ADS1115 16-Bit ADC - 4 Channel with Programmable Gain Amplifier
US$22.74
This provides 16-bit precision at 860 samples/second over I2C. The chip can be configured as 4 single-ended input channels, or two differential channels.
In stock
+ −
Add to wish list
KIT-11561 RaspiRobot Board
KIT-11561 RaspiRobot Board
US$25.20

After you've assembled it, simply plug the RaspiRobot Board into the GPIO port on the Raspberry Pi and it provides dual bi-directional motor controllers, two open collector outputs, two switch inputs, a pair of status LEDs and even a voltage regulator capable of powering the Pi using a battery source from 7-12VDC.

In stock
+ −
Add to wish list
1109 Adafruit RGB Positive 16x2 LCD+Keypad Kit for Raspberry Pi
US$43.67
This pi plate is perfect for when you want to build a stand-alone project with its own user interface. The 4 directional buttons plus select button allows basic control without having to attach a bulky computer. The plate is designed for both Revision 1 and Revision 2 Raspberry Pi's. It uses the I2C (SDA/SCL) pins. We have a special xtra-tall 26-pin header so the plate sits above the USB and Ethernet jacks.
In stock
+ −
Add to wish list
802 Adafruit 1.8" 18-bit Color TFT Shield w/microSD and Joystick
802 Adafruit 1.8" 18-bit Color TFT Shield w/microSD and Joystick
US$53.68
This lovely little shield is the best way to add a small, colorful and bright display to any project. We took our popular 1.8" TFT breakout board and remixed it into an Arduino shield complete with microSD card slot and a 5-way joystick navigation switch (with a nice plastic knob)!
In stock
+ −
Add to wish list
85-ADA Shield Stacking Headers for Arduino (R3 Compatible)
85-ADA Shield Stacking Headers for Arduino (R3 Compatible)
US$3.42
These are standard 6-pin, 8-pin and 10-pin 0.1" spacing female headers...with a twist! The pins are extra long which means you can use these to stack shields!
In stock
+ −
Add to wish list
DFR0008 Input Shield For Arduino
DFR0008 Input Shield For Arduino
US$23.73
The upgraded Arduino Input Shield includes a two axis mini joystick (with moment switch) as well as four colored push buttons(Red,Yellow,Blue,Green).
In stock
+ −
Add to wish list
DFR0061 Joystick Module
DFR0061 Gravity: Joystick Module V2
US$15.33
Lots of robot projects need joystick. This updated joystick module V2 provides an affordable solution.  Simply connect  to two analog inputs, the robot is at your commands with X,Y control. It also has a switch that is connected to a digital pin.  This joystick module can be easily connect to Arduino by our IO Expansion Shield (DFR0265) with supplied cables.
In stock
+ −
Add to wish list
DFR0071 SD Module (Arduino Compatible)
DFR0071 SD Module (Arduino Compatible)
US$19.53
This DFRobot SD card shield is a Break out board for standard SD card. It allows you to add mass storage and data logging to your project.
In stock
+ −
Add to wish list
DFR0077 RS232-TTL Converter
DFR0077 RS232-TTL Converter
US$18.13
This adapter helps to connect TTL (Transistor-Transistor Logic) level signals to RS232 interface.
In stock
+ −
Add to wish list
Arduino Zumo Robot Instructional Pack
Arduino Zumo Robot Instructional Pack
US$159.03

The kit includes the parts necessary to complete an impressive Arduino controlled tracked based low profile robot, based on step by step instructions from an included 35 page instruction manual. All basic parts and programming downloads are included to provide your robot with basic but sophisticated capabilities. The kit consists of high quality parts from recognized manufacturers like Pololu.

Delivery within 2-3 weeks
+ −
Add to wish list
DEV-10730 LilyPad Coin Cell Battery Holder
DEV-10730 LilyPad Coin Cell Battery Holder
US$5.53
This is a simple board which holds a 20mm coin cell battery (such as a CR2032) and gives you 4 connection points (two positive and two negative) for sewing into your project.
In stock
+ −
Add to wish list
115 - 129
123 124 125 126 127 128 129 130 131 132 133 134 135 136 137
131 - 145