Our Brands

Development Boards

111 - 125
119 120 121 122 123 124 125 126 127 128 129 130 131 132 133
127 - 141
Newest Items First
15 Per Page
1362-ADA Standalone 5-Pad Capacitive Touch Sensor Breakout
1362-ADA Standalone 5-Pad Capacitive Touch Sensor Breakout
US$11.95

This provides the simplest way to create a project with mutiple capacitive touch sensors. 

In stock
+ −
Add to wish list
1361-ADA Pressure-Sensitive Conductive Sheet (Velostat/Linqstat)
1361-ADA Pressure-Sensitive Conductive Sheet (Velostat/Linqstat)
US$7.91
It's pressure-sensitive: squeezing it will reduce the resistance, so it's handy for making flexible sensors.
In stock
+ −
Add to wish list
699-ADA Bone Box - Enclosure for Beagle Bone/Beagle Bone Black
699-ADA Bone Box - Enclosure for Beagle Bone/Beagle Bone Black
US$34.92
The enclosure comes as 6 laser cut acrylic pieces, 4 plastic standoffs, 8 hex-nuts and 8 1/2" 4-40 screws. Assembly is easy, and requires only a Phillips screwdriver. Once assembled, the box has lovely engraved ends with cut-outs for the DC power, Ethernet, microSD card, USB host and USB debug ports.
In stock
+ −
Add to wish list
MR002-002.1 Micro USB to Serial Adapter
MR002-002.1 Micro USB to Serial Adapter
US$24.50
This is a usefull tool that allows to connect Personal Computers with any microcontroller system via the USB port. This tiny and lightweight board is only 19x13 mm, including the mini-B connector, and its weight is only 1,4 gr (0,05 oz). Interfacing is realized by two 0,100” strip connectors that are distant 0,600” (15,24mm).
In stock
+ −
Add to wish list
DFR0151 Real Time Clock Module (DS1307) V1.1
DFR0151 Real Time Clock Module (DS1307) V1.1
US$9.73
The module comes fully assembled and pre-programmed with the current time (ok, so it's our current time - MST).
In stock
+ −
Add to wish list
ADXL345 - Triple-Axis Accelerometer (+-2g/4g/8g/16g) w/ I2C/SPI
US$26.95
Filling out our accelerometer offerings, we now have the really lovely digital ADXL345 from Analog Devices, a triple-axis accelerometer with digital I2C and SPI interface breakout. We added an on-board 3.3V regulator and logic-level shifting circuitry, making it a perfect choice for interfacing with any 3V or 5V microcontroller such as the Arduino.
In stock
+ −
Add to wish list
1092-ADA Tactile On/Off Switch with Leads
1092-ADA Tactile On/Off Switch with Leads
US$6.09
Squeeze once to turn on, squeeze again to turn off! This clicky switch makes a great power switch or mode toggler. We like this switch because it's easy to embed in a seam for easily powering up/off wearable and fabric projects. Can handle up to 14V and 2 Amps! This is a really satisfying switch.
In stock
+ −
Add to wish list
978 Panel mount HDMI Cable - 40 cm
978 Panel mount HDMI Cable - 40 cm
US$10.42
This panel mount extension cable will allow you to extend an HDMI connection and secure it to an enclosure. Perfect for placing your Raspberry Pi in a secure box. Two M3 screws are used to attach the female socket end, 1"/25.4mm apart. Two hex-screws are included and the hex nuts are embedded inside the molded end. 
In stock
+ −
Add to wish list
945-ADA 2.4GHz Dipole Swivel Antenna with RP-SMA - 5dBi
945-ADA 2.4GHz Dipole Swivel Antenna with RP-SMA - 5dBi
US$13.79

This 8"/200mm long swivel dipole antenna has 5dBi of gain and 50Ω impedance so it will work fantastically with just about any 2.4-2.5GHz wireless receiver/transmitter such as: 2.4GHz Wi-Fi (802.11b/g/n), 2.4GHz XBee, Bluetooth, Other 2.4GHz transceivers.

In stock
+ −
Add to wish list
PRT-11765 13x2 Pin Female Header
PRT-11765 13x2 Pin Female Header
US$2.73
These 0.1" spaced female headers are perfect for building your own Raspberry Pi add-on modules. These PTH headers are arranged in 2 rows of 13 and mate with the Raspberry Pi GPIO header.
In stock
+ −
Add to wish list
735 74LVC245 - Breadboard Friendly 8-bit Logic Level Shifter
74LVC245 - Breadboard Friendly 8-bit Logic Level Shifter
US$2.63
The 74LVC245 is designed so that even when it runs at 1.8V, it still happily accepts 5V signals in one pin and converts it to a lower logic level on the opposite pin. This chip is only for digital signals, it doesn't convert analog signals (you need an op amp for that).
Delivery within 2-3 weeks
+ −
Add to wish list
804 PS/2 Wired Connector - Panel Mount MiniDIN-6
804 PS/2 Wired Connector - Panel Mount MiniDIN-6
US$12.47
This connector is sturdy and easy to panel mount, and has pre-soldered wires connected to the 6 contacts (of which 4 are used).
Delivery within 2-3 weeks
+ −
Add to wish list
1230 SMT Breakout PCB Set For SOT-23, SOT-89, SOT-223 and TO252
1230 SMT Breakout PCB Set For SOT-23, SOT-89, SOT-223 and TO252
US$8.67
This set comes with 3 different boards which fit 5 different packages and comes with five SOT-23 (fits 2 x SOT-23 on the back, and a single SOT-23-5 or SOT-23-6 on the front), four SOT-89 or SOT-223, and four TO-252.
Delivery within 2-3 weeks
+ −
Add to wish list
659 FLORA - Wearable electronic platform: Arduino-compatible
659-ADA FLORA - Wearable electronic platform: Arduino-compatible - v3
US$23.02
The FLORA is small (1.75" diameter, weighing 4.4 grams). The FLORA family also has the best stainless steel threads, sensors, GPS modules and chainable LED NeoPixels, perfect accessories for the FLORA main board. The FLORA has built-in USB support. Built in USB means you plug it in to program it, it just shows up - all you need is a Micro-B USB cable, no additional purchases are needed!
In stock
+ −
Add to wish list
276 5V 2A (2000mA) switching power supply - UL Listed
276 5V 2A (2000mA) switching power supply - UL Listed
US$10.71

This switching supply gives a clean regulated 5V output at up to 2000mA. 110 or 240 input. This cable terminates with a 'standard' 5.5mm OD, 2.1mm ID positive tip connector. This wall adapter is perfect for supplying power to the BeagleBone Black.

In stock
+ −
Add to wish list
111 - 125
119 120 121 122 123 124 125 126 127 128 129 130 131 132 133
127 - 141