Our Brands

Development Boards

104 - 118
112 113 114 115 116 117 118 119 120 121 122 123 124 125 126
120 - 134
Newest Items First
15 Per Page
2029-ADA Assembled Pi Cobbler Plus - Breakout Cable - for Pi B+/A+/Pi 2/Pi 3
US$12.17
It's an add on prototyping Pi Cobbler from Adafruit specifically designed for the B+ and Pi 2 that you can break out all those tasty power, GPIO, I2C and SPI pins from the 40-pin header onto a solderless breadboard. This will make "cobbling together" prototypes with the Pi super easy.
In stock
+ −
Add to wish list
2028-ADA Assembled Pi T-Cobbler Plus - GPIO Breakout - for RasPi A+/B+/Pi 2/Pi 3
US$12.25
The T-Cobbler Plus is an add on prototyping board from Adafruit specifically designed for the B+, Pi 2 and Pi 3 that can break out all those tasty power, GPIO, I2C and SPI pins from the 40-pin header onto a solderless breadboard. This set will make "cobbling together" prototypes with the Pi super easy.
In stock
+ −
Add to wish list
L3GD20H Triple-Axis Gyro Breakout Board - L3GD20/L3G4200 Upgrade
US$19.25
A gyroscope is a type of sensor that can sense twisting and turning motions. Often paired with an accelerometer, you can use these to do 3D motion capture and inertial measurement.
Delivery within 2-3 weeks
+ −
Add to wish list
PRT-13054 Raspberry Pi B+ - GPIO Shrouded Header (2x20)
US$1.64
This 2x20 shrouded header has the same number and spacing of pins as the Raspberry Pi B+ so you can easily connect via ribbon cable to the low-level peripherals and get hacking! This through-hole header has 40 0.1"-spaced pins and is keyed for polarity.
In stock
+ −
Add to wish list
BOB-12052 LTC4150 Coulomb Counter Breakout
US$26.55
This breakout is capable of constantly monitoring the current your sensor is using, is able to add it up, and will give you a pulse each time a given amount of amp-hours have been used. When used effectively and if you start with a full battery, you’ll always know exactly how much of it is left!
In stock
+ −
Add to wish list
VEL-VMA04 ETHERNET SHIELD FOR ARDUINO®, WPSH04
US$55.93
Configure your Arduino as a simple web server or let it get data from the worldwide web. Also available in kit version VEL-KA04.
Delivery within 2-3 weeks
+ −
Add to wish list
VEL-VMA05 I/O SHIELD FOR ARDUINO, WPSH05
US$55.93
This is a general purpose INPUT - OUTPUT shield for Arduino. Also available in kit version VEL-KA05.
Delivery within 2-3 weeks
+ −
Add to wish list
VEL-VMA02 AUDIO SHIELD FOR ARDUINO, WPSH02
US$40.25
Record your voice via a built-in microphone or a line input. Also available in kit version VEL-KA02.
Delivery within 2-3 weeks
+ −
Add to wish list
2094-ADA JTAG (2x10 2.54mm) to SWD (2x5 1.27mm) Cable Adapter Board
US$8.67
This adapter board is designed for adapting a 'classic' 2x10 (0.1"/2.54mm pitch) JTAG cable to a slimmer 2x5 (0.05"/1.27mm pitch) SWD Cable.  It's helpful for using products like theJTAGulator or SEGGER J-Link with tiny boards that use the 10-pin SWD programming connector.
In stock
+ −
Add to wish list
DEV-13035 Intel® Edison Block - OLED
US$34.93
Equip your Edison with a graphic display using the Edison OLED Block! Simply snap this board onto your Edison to gain access to a 0.66", 64x48 pixel monochrome OLED. To add some control over your Edison and the OLED, this board also includes a small joystick and a pair of push-buttons which can be used them to create a game, file navigator, or more!
In stock
+ −
Add to wish list
DEV-13037 Intel® Edison Block - Battery
US$34.93
The Battery Block brings a single cell LiPo Charger and 400mah battery to power an Intel® Edision and expansion cards. The Battery board can be used with an external battery to increase runtime of your Edison which can be pluged in with a micro USB cable to charge.
In stock
+ −
Add to wish list
BOB-12918 Breakout Board for MCP4725 I2C DAC
US$10.35
The MCP4725 is an I2C controlled Digital-to-Analog converter (DAC). A DAC allows you to send analog signal, such as a sine wave, from a digital source, such as the I2C interface on the Arduino microcontroller.
In stock
+ −
Add to wish list
2512-POLOLU A4990 Dual Motor Driver Shield for Arduino
US$14.82
This small shield is an easy, economical way to control two small brushed DC motors with an Arduino or Arduino-compatible board.
In stock
+ −
Add to wish list
2753-POLOLU DRV8835 Dual Motor Driver Kit for Raspberry Pi
US$23.92
The DRV8835 Dual Motor Driver Kit for Raspberry Pi B+ provides an easy and low-cost solution for driving a pair of small brushed DC motors with a Raspberry Pi Model B+. The expansion board features Texas Instruments' DRV8835 dual H-bridge motor driver IC.
In stock
+ −
Add to wish list
2077-ADA Adafruit Proto Shield for Arduino Kit - Stackable Version R3
US$17.42
This prototyping shield is the best out there (well, we think so, at least), and now is even better with Version R3 - updated for the most compatibility with just about all the Arduinos! It works with UNO, Mega, Leonardo, NG, Diecimila, Duemilanove, and compatible Arduinos.
In stock
+ −
Add to wish list
104 - 118
112 113 114 115 116 117 118 119 120 121 122 123 124 125 126
120 - 134