ESP32-WROOM-32, geeekus Wi-Fi + Bluetooth BLE Low Power IOT Microcontroller, 38 pin, usb micro, with original ESP32-WROOM-32 and CP2102.
If you're interested in making your project connect to the web and be part of the grander scheme of IOT (Internet of Things) then this board is the gadget for you! Like other microcontrollers and microprocessors, the ESP32 now has built in power regulation circuits, on board antennas and noise filters and fits snuggly onto a breadboard for rapid prototyping. The ESP32 can interface with other MCUs as master or slave or function completely standalone through SPI/SDIO, I2C and UART. The microcontroller can also support an SD card and multiple sensors.
This microcontroller has TWO microprocessor inside the metal RF shield as one will act as the co-processor. You have the capability of turning off the main processor when not in use to save power. This microcontroller is close to the same package size of an Arduino Nano, yet deliver features and capability that put its’ competitors to shame.
This microcontroller runs on the AT command, but why stop there. Thanks to the espressif and the git community you are able to have it running in the Arduino IDE. Simply select the board from the menu and the port option like any normal Arduino device and play with some example files provided!
With pre-soldered breadboard headers and built-in USB-serial adapter, all you need is a microUSB cable to connect it to your computer. No external programmer necessary
The geeekus ESP32-WROOM-32 is a solid development board with original parts and yellow text on a black board, which makes identifying pinsets easier on the eyes.
SPECIFICATIONS:
- Microcontroller: ESP-WROOM-32 module
- USB to Serial Port Chip: CP2102-GMR
- Operating Voltage: DC 5V
- Operating Current: 80mA (average)
- Current Supply: 500mA (Minimum)
- Operating Temperature Range: -40℃ ~ +85℃
- WiFi mode: Station/SoftAP/SoftAP+Station/P2P
- WiFi protocol: 802.11 b/g/n/e/i (802.11n, speed up to 150 Mbps
- WiFi frequency range: 2.4 GHz ~ 2.5 GHz
- Bluetooth protocol: conform to Bluetooth v4.2 BR/EDR and BLE standards
- Dimensions: 55mm*26mm*13mm
- Weight: 9.3g
Datasheet: https://espressif.com/en/products/hardware/esp32/overview
Resources: https://espressif.com/en/products/hardware/esp32/resources
Arduino Board Installation Guide:
Windows: https://github.com/espressif/arduino-esp32/blob/master/doc/windows.md
Mac: https://github.com/espressif/arduino-esp32 (scroll down to installation sub title)
Linux: https://github.com/espressif/arduino-esp32 (scroll down to installation sub title)
WARNING
