Our Brands

Audio/ Video/ Game Shields

1 2
Newest Items First
15 Per Page
AM-JOYSTICK2, Dual Joystick Stacking Shield for Arduino UNO, Arduino MeArm Controller
US$6.78
Looking for a 2 axis joystick with a push button for your project, want to create your own remote control or arcade device? This unit will provide all that on a breakout board simple to connect to any microcontroller and start working on your project!
In stock
+ −
Add to wish list
GK-AMO-AJOY geeekus PS2 Analog 2 Axis Joystick Module with Button for Arduino
US$4.50
The geeekus Joystick Module is widely used in gaming, robot control, drone control, arduino projects, micro:bit and raspberry pi projects.
In stock
+ −
Add to wish list
ARD-PIANO Touch Piano Sensor Module Expansion Board
US$12.96
This product is a touchpad piano module with an amplifier compatible with Arduino for all your musical needs and mini electronic piano experiment. 


 
In stock
+ −
Add to wish list
ISD1760 Serial Voice Recording and Playing Module for Arduino
US$11.54
The ISD1700 series of recording chips are highly integrated and high performance chips. It can do multi-segment recording and the sampling rate can be adjusted from 4K to 12K. It can be powered by a 2.4 to 5.5VDC power supply.
In stock
+ −
Add to wish list
EF04017 Octopus ADKeypad
US$8.14
Octopus Electronic Bricks, you can use them to build electronics projects just as easy as piling bricks. By using Octopus electronic bricks, you may connect Arduino / Freaduino compatible boards easily with various digital, analog and I2C/Uart interfaces. These the breadboard-less firm connection are prepared to extensive modules like poteniometers, sensors, relays, servos ... even buttons, just plug and play. This keyboard uses an analog input to read the five key state which saves IO resource for the Arduino. It can be used together with our I/O expansion boards to make amazing interactive project.
In stock
+ −
Add to wish list
PIM110 Picade PCB - Arduino Compatible with 3W Amp
US$31.23
This is an Arduino-compatible board with integrated 3W stereo amplifier designed for use in arcade projects (like our Picade). It behaves like a keyboard when plugged in via USB and has a default key-mapping (though you can reprogram it using the Arduino IDE). Connections are made using screw terminals for a solid, permanent installation. It uses the same micro-controller as the Arduino Leonardo (the ATmega32U4) and is pre-installed with the Arduino bootloader and our software.
In stock
+ −
Add to wish list
DFR0534 Gravity: UART MP3 Voice Module
US$11.78
This module can store 8MB audio files, which means it can store more than 200 audios for your choice, support MP3 and WAV formats. Its storage method is as simple as USB flash drive, and audios can be updated at any time. It uses the DF-Gravity interface, free from wiring; It has the ability to play the specified audio, play in loop, and adjust volume. It is suitable for all kinds of projects related to sound or voice, such as intelligent car, meteorological stations, smart home devices, vehicle navigation, toll stations, safety monitoring, machine audio navigation and so on.
In stock
+ −
Add to wish list
ARD-MP3 Audio Shield For Arduino with Microphone Input and microSD Card Reader
US$15.32

Based on VS1053B from VLSI, this MP3 shiled allows you to plug into any Arduino UNO or MEGA direcly without the hassle of having a bunch of wires everywhere. It's small and convienient which makes it more easy to play music compared with the tiny mp3 breakout boards.
It includes a VS1053 chip is a versatile MP3 codec processor that is capable of decoding a variety of music formats,including Ogg/Vorbis/MP3/AAC/WMA/MIDI audio etc..For the best headphone listening experience, the VS1053 includes EarSpeaker spatial processing which accurately simulates how a room with stereo loudspeakers would sound.

 
With the TF card slot on the other side of the board, you can play mp3 files from a Micro SD card using this board.
It is easily to drop it in your project or make a mp3 player using your microcontroller.
In stock
+ −
Add to wish list
DFR0420 Audio Shield For DFRduino M0
US$26.25
DFRduino M0 Audio Expansion Shield selects the latest full-featured WM8978 of Wolfson as the audio processor. It comes with HI-FI level digital signal processing kernel, supporting 3D surround-sound enhancement and 5 frequency bands balance which can improve the sound quality. With a programmable notch filter, it also can filter noise caused by current noise, etc. Attributing to the plentiful hardware resource on DFRduino M0, we finally can transplant this HI-FI level codec chip to Arduino platform. Functions like dual channels playing, SD card storage, MONO recording and dual channels 3W PA (power amplification) are available even without serial port MP3 module. It is efficient in serial port resources, flexible in control and convenient to use. DFRduino M0 Audio Expansion Shield adopts standard IIS interface, equipped with on-board MIC and 3.5mm audio jack, supporting external voice source input and output. It also has left and right channels speakers, which you can connect 3W trumpets.
In stock
+ −
Add to wish list
ARD-620 Arcade Style Pushbutton Breakout Board
US$4.61
This is a simple breakout board that features five pushbuttons. You can program your code to specific functions when the buttons are pressed. This board is a perfect example of how to design a circuit using only one analog pin from your microcontroller! Depending on which push button you press it will vary the voltage begin returned back to the microcontroller! If you are looking for a simple board that doesn’t use multiple digital pins and is easy to use, this board is a genius little trick to save those precious digital pins. Note: The pushbuttons come with a yellow cap, you can purchase our pushbutton kit that comes with various colored caps if you choose to decorate the board. When no buttons are pressed analogRead will indicate the full voltage 1023. SW1 will be 0, SW2 will be 30, SW3 will be 86, SW4 will be 164 and SW5 will be 348.
In stock
+ −
Add to wish list
ARD-619 Speed & Voice Recognition Module V3
US$46.19
This Voice Recognition Module is a compact and easy-control speaking recognition board. This product is a speaker-dependent voice recognition module. It supports up to 80 voice commands in all. Max 7 voice commands could work at the same time. Any sound could be trained as command. Users need to train the module first before let it recognizing any voice command. This board has 2 controlling ways: Serial Port (full function), General Input Pins (part of function). General Output Pins on the board could generate several kinds of waves while corresponding voice command was recognized.
In stock
+ −
Add to wish list
ARD-618 Wireless Capable Joystick Development Board
US$9.23
This is a standard joystick board that comes with one joystick and seven push buttons. What makes this board remarkable is that it has a switch to change the output voltage to 3.3v or 5v. Just above the joystick you have access to a 8 pin adapter that is designed for the nRF24L01 and on the opposite side you have access to Bluetooth port. You can choose to get this board up and running with a wireless module or Bluetooth module.
In stock
+ −
Add to wish list
AM-136 MP3 Audio in AD4 Format Playback Module for 3.3v Arduino
US$7.69
This product allows for direct playback of MP3 Audio files encoded in AD4 file format stored on a MicroSD/TF card. The module features an output that can drive an 8ohm speaker using the SPK+ and SPK+ pins. Alternatively, you can drive a single ended amplifier directly from the DAC output via the AUDIO-L pin. This unit also has some few dedicated pins to allow microcontroller signals to control playback features such as play and pause, track forward/backwards and volume up/down. You could also use a two wire serial interface to select the track and send playback controls.
In stock
+ −
Add to wish list
WAVE-110 Accessory Shield
US$25.19

Accessory Shield integrates common used accessories/components listed as follows: Joystick (5 directions), Adjustable potentiometer, Buzzer, RGB LED, Temperature sensor, 3-axis digital accelerometer, High precision RTC, 0.96inch OLED, XBee interface.

In stock
+ −
Add to wish list
WAVE-3678, 8 Push Buttons
US$4.19
The Waveshare 3678 8 Push Buttons module provides 8 single push buttons in a small board.
In stock
+ −
Add to wish list
1 2