Opto/Illumination

US$3.07
This is a high wattage based, super bright LED. Simple and easy to connect using only 3 wires, this board runs on 5v and 0.7Amps. Using the signal line, you can vary the brightness using PWM code from the Microcontroller. You could have strobe, flashing or pulse effect. This LED will produce around 180-210 lumens (measure of brightness) and gives a warm white color (6000-7000K).
In stock
+
Add to wish list

US$1.09
56-7349-0 Lamp Incandescent T1-3/4, 6V 0.20A
Delivery within 2-3 weeks
+
Add to wish list

US$1.08
56-0017-0 Bulb, Type 6 base 28V 0.065A
In stock
+
Add to wish list

US$15.96
This is a 4-in-1 MAX2719 8x8 Dot LED matrix for microcontrollers. You may be familiar with the original 8x8 LED dot MAX2719 matrix which allows you to program exciting light shows and displays. This unit combines 4 of those matrices into one large link. Imagine being able to control not only 64 LEDs but 256 LED’s with different colors and timing! Even more impressive, you can multiplex these units and create an even longer link or a full cube. The units can link left to right or in parallel from each other. The possibilities are endless and it can all be done with your favorite microcontroller.
In stock
+
Add to wish list

US$30.73
Our Gravity OLED 12864 display is a self-luminous display module with a blue background. The display areas is 0.96”and uses an IC SSD1306 chip. The OLED screen supports I2C communication and refresh rates of up to 60Hz. The module uses the Gravity I2C common interface for easy plug and play usage – meaning you can connect it without the need for wires - just plug it straight in to your device. The display bezel is constructed from aluminum alloy which protects the screen from scratches and damage.
In stock
+
Add to wish list

US$85.75
This is a 64x32 RGB LED Matrix Panel, it has 2048 full-color RGB LEDs in all. Each LED can be independently controlled. To control this LED Matrix, at least 13 digital GPIOs are required. The led matrix has 2 IDC connectors (DATA_IN, DATA_OUT) on the back, you can cascade multiple panels and make a huge screen together. You are highly recommended to use microcontrolloers with large RAM and high speed to control this LED, such as Raspberry Pi, Mega 2560. Please note that the Arduino do not support all functions as its speed is not enough to run multiple panels.
In stock
+
Add to wish list

US$1.79
This 5 mm clear white Ultrabright LED has an internal resistor allowing it to work with a 12 VDC direct connection. Can operate at lower voltages with lower brightness.
In stock
+
Add to wish list

US$1.79
This 5 mm Ultrabright Blue Water Clear LED has an internal resistor allowing it to work with a direct 12 VDC connection. Can operate at lower voltages with lower brightness.
In stock
+
Add to wish list

US$1.79
This 5 mm Blue Diffused LED has an internal resistor allowing it to work with a direct 12 VDC connection. Can operate at lower voltages with lower brightness.
In stock
+
Add to wish list

US$1.79
This 5 mm Blue Diffused LED has an internal resistor allowing it to work with a direct 12 VDC connection. Can operate at lower voltages with lower brightness.
In stock
+
Add to wish list

US$0.78
This 5 mm Yellow Diffused LED has an internal resistor allowing it to work with a direct 12 VDC connection. Can operate at lower voltages with lower brightness.
In stock
+
Add to wish list

US$0.69
This 5 mm Green Diffused LED has an internal resistor allowing it to work with a direct 12 VDC connection. Can operate at lower voltages with lower brightness.
Delivery within 2-3 weeks
+
Add to wish list

US$0.72
This 5 mm Red Diffused LED has an internal resistor allowing it to work with a direct 12 VDC connection. Can be used at lower voltages with lower brightness.
In stock
+
Add to wish list

US$5.53
This module is a simple 8x8 LED Matrix that contains up to 64 LEDs. Each LED has a diameter of 3mm wide and the entire module is 37mm wide and long. The pinout on the back is the regular 16 pin you would find in a 4x Seven Segment Display.
In stock
+
Add to wish list

US$14.00
These 5mm blue LEDs are very bright and have about 20degree LED beam. They go easily into a breadboard and will add that extra zing to your project.
In stock
+
Add to wish list