1.8 inch Color TFT LCD Display for 3.3v Logic Microcontroller with SD card
An 1.8 inch TFT LCD that is super useful for small project designs and gives a very sharp/nice picture quality which works amazing well with 3.3v logic level microcontrollers. It is possible to interface with 5v Logic Arduino Microcontrollers by using 1k resistor on the Data Lines or a Level Shifter. Unfortunately this display is not a touchscreen display, however it makes it up with the included SD Card Slot, Not Micro which you finally have a reason to use your SD Card adapters or SD Cards. Soldering not required to get the display to work, but requires some soldering for the SD card functionality (4 soldering holes on the other side).
Specs:
- ST7735 LCD driver
- 128 x 160 pixel resolution
- SD CARD uses SPI
- I2C or 8 digital wire mode for LCD Display
Additional wiring and instruction guide:
http://www.instructables.com/id/Arduino-TFT-display-and-font-library/
Example codes:
Please install the library before executing the code!
WARNING
