Opto/Illumination

US$10.95
This screen is 26mm wide and 15mm tall offering very small real-estate with a hefty cost. It may seem counter intuitive to buy this display until you realise it is based on OLED. The text are always sharp and clear to read on OLEDs compared to the standard pixel-based LCDs. This screen has a higher resolution of 128x64, allowing for more complex designs to be displayed. This screen does not require a backlight.
In stock
+
Add to wish list

US$13.93
This is an awesome led matrix that consists of 484 surface mount LEDs inside, it has a small lithium battery allowing you operate it without a battery bank. You can use the provided pin to poke through your clothes and latch it or use the magnet to lock the tag in place without making holes! This product comes with a USB cable for programming and charging! It also features a push-button the back that can be assigned to change to the next text, you have up to 8 messages that can be programmed.
In stock
+
Add to wish list

US$97.93
This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 640x384 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
In stock
+
Add to wish list

US$1.39
The CNY70 is a reflective sensor that includes an infrared emitter and phototransistor which blocks visible light. Package: Thru hole. Sensing Distance: 0 mm to 5 mm. Collector- Emitter Voltage VCEO Max: 32 V. Maximum Collector Current: 50 mA. Vf - Forward Voltage: 1.25 V. Vr - Reverse Voltage: 5 V. Maximum Operating Temperature: + 85 C. Minimum Operating Temperature: - 40 C.
In stock
+
Add to wish list

US$34.98
This is a 32x16 RGB LED Matrix Panel. It has 512 full-color RGB LEDs in all. Each LED can be independently addressed and controlled. It requires at least 13 digital GPIOs to control the LED matrix. The led matrix has 2 IDC connectors (DATA_IN, DATA_OUT) on the back, you can cascade multiple panels and make a huge screen together. BUT Arduino doesn’t support this function, its speed is not enough to multiple panel. NOTE: This panel needs a 5V@2A power supply. And if you connect 4 or more screen, it needs a high performance controller, such as Mega 2560, Raspberry. .etc.
In stock
+
Add to wish list

US$68.75
This is a 32x32 RGB LED Matrix Panel, it has 1024 full-color RGB LEDs in all. Each LED can be independently addressed and controlled. It requires at least 13 digital GPIOs to control the LED matrix. The led matrix has 2 IDC connectors (DATA_IN, DATA_OUT) on the back, you can cascade multiple panels and make a huge screen together. BUT Arduino doesn’t support this function, its speed is not enough to multiple panel. NOTE: This panel needs a 5V@3A power supply. And if you connect 2 or more screen, it needs a high performance controller, such as Mega 2560, Raspberry. etc.
In stock
+
Add to wish list

US$8.46
This is an LED RGB ring for the WEMOS D1 Mini. The ring offers 12 RGB LEDs that can be programmed for the ESP8266 using the Adafruit Neopixel library.
In stock
+
Add to wish list

US$18.19
This high resolution LCD TFT screen is a convenient shield for both Arduino UNO and MEGA. The screen is touchscreen and comes with a tactile pen and SD card slot for images and graphics.
In stock
+
Add to wish list

US$0.95
This prewired 3mm warm white LED provides a convenient preassembled indicator for incorporating into any hobbyist DIY project. Has a built in current limiting resistor.
In stock
+
Add to wish list

US$79.79
This is a serial interface E-Ink display module, 4.3inch, 800×600 resolution, with embedded font libraries, ultra low power consumption. You don't have to know anything about the complex underlying details of e-Paper, nor the specific algorithms of displaying graphics, texts, and images. All it needs is the serial interface, and all it matters is your creativity.
In stock
+
Add to wish list

US$54.37
This is an E-Ink display module, 4.2inch, 400x300 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display. Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
In stock
+
Add to wish list

US$41.99
This is an E-Ink display module, 4.2inch, 400x300 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
In stock
+
Add to wish list

US$29.39
This is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display. Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
In stock
+
Add to wish list

US$29.39
This is an E-Ink display HAT for Raspberry Pi, 2.7inch, 264x176 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display. Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
In stock
+
Add to wish list

US$31.62
This is an E-Ink display HAT for Raspberry Pi, 2.7inch, 264x176 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
In stock
+
Add to wish list