Our Brands

Opto/Illumination

44 - 58
52 53 54 55 56 57 58 59 60 61 62 63 64 65 66
60 - 74
Newest Items First
15 Per Page
LED-102, 0.36” Red 4-Digit 7-Segment LED Display (Common Cathode)
US$2.79
These 0.36” 4-digit 7-segment LED displays are big enough to see from a distance but not so big that you’d have trouble finding an enclosure for them. These common-cathode displays feature 4x 7-segment digits and one decimal point per digit. The LEDs have a forward current of 30mA. Connect Ground to pin 12,9,8 and 6. Insert 2.5VDC into pins 1 – 5, 7,10,11. See schematic to view pinouts. Pin 1 starts from the left with the first digit.
In stock
+ −
Add to wish list
LDR-05 Photo-Resistor 5mm diameter LDR (Light Dependent Resistor) N.C. (Normally Closed)
US$0.55
This is a normally closed switch, when light is present it will allow the input voltage and current to flow through. When light is absent, the unit acts like a resistor slowly increasing up to 20MOhms and upwards to act as a normally open switch. This unit comes in the body of a 5mm led, don’t be fooled as it might look like an LED at first glance. Unit sold individually.
In stock
+ −
Add to wish list
LED-STRIP-230B-1M 1 Meter, 60 LEDs 5VDC SK9822/APA102 IP65 RGB STRIP – BLACK PCB
US$27.93
A 1 Meter Strip of awesomeness, that is what we use to describe this product. Unlike our 12V strips that use RF controls and can only drive the entire strip with Red, Green or Blue at a one instance; this product is addressable allowing the user to control each individual pixel. The downside of pixel controllable LEDs are that they run at 5VDC, so you might want to pick up a power supply designed for these strips at 5VDC or DC barreled Jack power supply at 5VDC. Each three pixels draw approximately 60mA on white, so you might want to calculate the total amount of LEDs you have in mind and find a power supply with the sufficient amount of current to supply them.
Delivery within 2-3 weeks
+ −
Add to wish list
LED-STRIP-240B-1M 1 Meter, 144 LEDs 5VDC SK9822/APA102 IP65 RGB STRIP – BLACK PCB
US$52.49
A 1 Meter Strip of awesomeness, that is what we use to describe this product. Unlike our 12V strips that use RF controls and can only drive the entire strip with Red, Green or Blue at a one instance; this product is addressable allowing the user to control each individual pixel. The downside of pixel controllable LEDs are that they run at 5VDC, so you might want to pick up a power supply designed for these strips at 5VDC or DC barreled Jack power supply at 5VDC. Each three pixels draw approximately 60mA on white, so you might want to calculate the total amount of LEDs you have in mind and find a power supply with the sufficient amount of current to supply them.
Delivery within 2-3 weeks
+ −
Add to wish list
LED-STRIP-115B-1M, 1 Meter 60 LEDs 5VDC SK6812/WS2812B IP65 RGBCW (Cool White) STRIP – BLACK PCB
US$21.61
A 1 Meter Strip of awesomeness, that is what we use to describe this product. Unlike our 12V strips that use RF controls and can only drive the entire strip with Red, Green or Blue at a one instance; this product is addressable allowing the user to control each individual pixel. The downside of pixel controllable LEDs are that they run at 5VDC, so you might want to pick up a power supply designed for these strips at 5VDC or DC barreled Jack power supply at 5VDC. Each three pixels draw approximately 60mA on white, so you might want to calculate the total amount of LEDs you have in mind and find a power supply with the sufficient amount of current to supply them.
In stock
+ −
Add to wish list
LED-STRIP-630B-1M 1 Meter, 30 LEDs 5VDC SK9822/APA102 IP30 RGB STRIP – WHITE PCB
US$18.13
A 1 Meter Strip of awesomeness, that is what we use to describe this product. Unlike our 12V strips that use RF controls and can only drive the entire strip with Red, Green or Blue at a one instance; this product is addressable allowing the user to control each individual pixel. The downside of pixel controllable LEDs are that they run at 5VDC, so you might want to pick up a power supply designed for these strips at 5VDC or DC barreled Jack power supply at 5VDC. Each three pixels draw approximately 60mA on white, so you might want to calculate the total amount of LEDs you have in mind and find a power supply with the sufficient amount of current to supply them.
In stock
+ −
Add to wish list
LED-STRIP-740B-1M 1 Meter, 60 LEDs 5VDC LPD8806 IP67 RGB STRIP – BLACK PCB
US$38.85
A 1 Meter Strip of awesomeness, that is what we use to describe this product. Unlike our 12V strips that use RF controls and can only drive the entire strip with Red, Green or Blue at a one instance; this product is addressable allowing the user to control each individual pixel. The downside of pixel controllable LEDs are that they run at 5VDC, so you might want to pick up a power supply designed for these strips at 5VDC or DC barreled Jack power supply at 5VDC. Each three pixels draw approximately 60mA on white, so you might want to calculate the total amount of LEDs you have in mind and find a power supply with the sufficient amount of current to supply them.
In stock
+ −
Add to wish list
LED-STRIP-112B-1M 1 Meter, 144 LEDs 5VDC SK6812/WS2812B IP65 RGBWW (Cold White) STRIP – BLACK PCB
US$41.89
A 1 Meter Strip of awesomeness, that is what we use to describe this product. Unlike our 12V strips that use RF controls and can only drive the entire strip with Red, Green or Blue at a one instance; this product is addressable allowing the user to control each individual pixel. The downside of pixel controllable LEDs are that they run at 5VDC, so you might want to pick up a power supply designed for these strips at 5VDC or DC barreled Jack power supply at 5VDC. Each three pixels draw approximately 60mA on white, so you might want to calculate the total amount of LEDs you have in mind and find a power supply with the sufficient amount of current to supply them.
In stock
+ −
Add to wish list
LED-107 Red 8x8 LED dot Matrix
US$2.79
This is a basic 8x8 LED matrix that lights up in red. You can simply connect 16 pins to a Arduino uno to drive on of these units or use a MAX7219 IC to help drive the leds without using all the available pins on the Arduino microcontroller.
In stock
+ −
Add to wish list
PI-LED-8x8 8x8 RGB LED Matrix with 74HC595 Shift Registers
US$19.95
This is a basic 2088RGB 8x8 LED matrix that runs on 3.3v, you can comfortably run this device on your raspberry pi or Arduino using the 3.3v pin. This board can do three colors or mix multiple colors. To simplify life this board comes with 5 female to female headers for wiring with the raspberry pi. Purchasing a male to female header makes it easy to run with Arduino. This board uses four daisy chained 74HC595 shifters. IC U1 controls the RED colors, IC U2 controls the Blue colors, ICU3 controls Green and ICU4 controls the row as common ground. This product might be difficult to work with, as it requires knowledge of how shift registers work, MSB and LSB along with creating arrays. We highly recommend this product for those who are curious and want to challenge themselves in programming.
In stock
+ −
Add to wish list
409-ADA High Brightness Aqua Electroluminescent (EL) Wire - 2.5 meters - High brightness, long life
US$18.48
We've got 2.6mm thickness EL wire, with a clear coat, pre-cut and soldered to a standard quick-connect EL wire. It is made with the latest technology and twice as bright as 'standard' 2.3mm EL - running it at 1.5KHz/90V it emits 150 cd/m^2 or light and a half-life (50% brightness reduction) after 3000 hours of continuous use. Draws about 10mA per meter. The capacitance is about twice that of 'standard' EL, 11 nF/m so if you're using an inverter, it will drive only half as much high brightness wire as standard.
In stock
+ −
Add to wish list
408-ADA High Brightness Blue Electroluminescent (EL) Wire - 2.5 meters - High brightness, long life
US$18.48
We've got 2.6mm thickness EL wire, with a blue coat, pre-cut and soldered to a standard quick-connect EL wire. It is made with the latest technology and twice as bright as 'standard' 2.3mm EL - running it at 1.5KHz/90V it emits 82 cd/m^2 or light and a half-life (50% brightness reduction) after 3000 hours of continuous use. Draws about 10mA per meter. The capacitance is about twice that of 'standard' EL, 11 nF/m so if you're using an inverter, it will drive only half as much high brightness wire as standard.
In stock
+ −
Add to wish list
407-ADA High Brightness Green Electroluminescent (EL) Wire - 2.5 meters - High brightness, long life
US$18.48
We've got 2.6mm thickness EL wire, with a lime green coat, pre-cut and soldered to a standard quick-connect EL wire. It is made with the latest technology and twice as bright as 'standard' 2.3mm EL - running it at 1.5KHz/90V it emits 123 cd/m^2 or light and a half-life (50% brightness reduction) after 3000 hours of continuous use. Draws about 10mA per meter. The capacitance is about twice that of 'standard' EL, 11 nF/m so if you're using an inverter, it will drive only half as much high brightness wire as standard.
In stock
+ −
Add to wish list
405-ADA High Brightness Orange Electroluminescent (EL) Wire - 2.5 meters - High brightness, long life
US$18.48
We've got 2.6mm thickness EL wire, with a orange coat, pre-cut and soldered to a standard quick-connect EL wire. It is made with the latest technology and twice as bright as 'standard' 2.3mm EL - running it at 1.5KHz/90V it emits 70 cd/m^2 or light and a half-life (50% brightness reduction) after 3000 hours of continuous use. Draws about 10mA per meter. The capacitance is about twice that of 'standard' EL, 11 nF/m so if you're using an inverter, it will drive only half as much high brightness wire as standard.
In stock
+ −
Add to wish list
404-ADA High Brightness Pink Electroluminescent (EL) Wire - 2.5 meters - High brightness, long life
US$18.48
We've got 2.6mm thickness EL wire, with a pink coat, pre-cut and soldered to a standard quick-connect EL wire. It is made with the latest technology and twice as bright as 'standard' 2.3mm EL - running it at 1.5KHz/90V it emits 27 cd/m^2 or light and a half-life (50% brightness reduction) after 3000 hours of continuous use. Draws about 10mA per meter. The capacitance is about twice that of 'standard' EL, 11 nF/m so if you're using an inverter, it will drive only half as much high brightness wire as standard.
In stock
+ −
Add to wish list
44 - 58
52 53 54 55 56 57 58 59 60 61 62 63 64 65 66
60 - 74