12VDC 5M 3528SMD Warm White LED Strip
These led strips are powerful and glow intensively! Also, they have a density of 60 LEDs per meter, run at 12VDC and consume around 72W maximum per strip. This strip is not waterproof and comes with a white background color. There's an adhesive strip on the back which should stick to most clean surfaces.
If you want to dim the strip, use an NPN or N-channel MOSFET (although the big powerful kind is good for a large strip) and PWM the input.
You can cut and shorten the strip for your taste with ease, there are cut-lines every 5cm (3 LEDs each). Solder to the 0.1" copper pads and you're good to go.
Specifications
- Colour: 3500K (warm white)
- Not Waterproof, IP20
- Adhesive strip on the backside of the strip
- Operating voltage 12VDC
- Sold by the 5 meter.
The strip can be cut along the cutting marks without damaging the rest of the strip.You can cut them into segments of different lengths. Can be bent to meet your requirements. Great for DIY lighting projects.
The package only includes the LED strip. Power Supply and connectors are not included.
Connection is easy. The LED strip comes with two bare wires already attached to it. Connect the bare wires to the 368-ADA (not included) screw terminal, which in turn connects to our DC-1203-2.1 (12V power supply not included). See the connection diagram below.
If you need a dimmer, you can use our LED-STRIP-DIM1 (not included). See the connection diagram below.
Of course, you can use your own power supply (make sure it's 12V and at least 2 amps), or dimmer.
WARNING
