RP2350-Touch-AMOLED-1.64-M
The RP2350-Touch-AMOLED-1.64-M is a high-performance, highly integrated MCU board designed by Waveshare. It features a compact size with an onboard 1.64inch AMOLED capacitive touch display, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope), RTC chip, TF card slot and so on, making it easy to develop and integrate into products quickly.
Features:
- RP2350A microcontroller chip designed by Raspberry Pi in the United Kingdom
- Adopts unique dual-core and dual-architecture design: dual ARM Cortex-M33 or dual Hazard3 RISC-V processors support, flexible clock running up to 150 MHz
- 520KB of SRAM, and 16MB onboard Flash memory
- Type-C connector for easier use
- Onboard 1.64inch AMOLED capacitive touch display, QSPI interface, 280 × 456 resolution, 16.7M color
- Integrated CO5300 display driver and FT3168 capacitive touch chip, using QSPI and I2C communication respectively
- Lithium battery recharge/discharge header, suitable for mobile applications
- USB 1.1 with device and host support
- Low-power sleep and dormant modes
- Drag-and-drop programming using mass storage over USB
- Adapting 17 × GPIO pins for flexible configuration of pin function
- 2 × I2C, 2 × UART, 3 × 12-bit ADC, 13 × controllable PWM channels
- Accurate clock and timer on-chip
- Temperature sensor
- Accelerated floating-point libraries on-chip
- 12 × Programmable I/O (PIO) state machines for custom peripheral support
AMOLED parameters
|
Display Panel |
AMOLED |
Display Size |
1.64 inch |
|
Resolution |
280 × 456 pixels |
Display Colors |
16.7M |
|
Brightness |
350 cd/㎡ |
Contrast Ratio |
60000:1 |
|
Communication Interface |
QSPI |
Driver IC |
C03500 |
|
Touch |
Supported |
Touch IC |
FT3168 |
