The Waveshare 30795 is the Modbus POE ETH Relay 16-Ch module which is a 16-Channel Ethernet DIN Rail Mount Relay Module, Modbus RTU / Modbus TCP Protocol, Ethernet Port Communication, Supports PoE Power Supply, With Various Isolation and Protection Circuits.
Part No: Modbus POE ETH Relay 16CH
16-Ch Ethernet Relay Module
Ethernet Port Communication & Cascade Support, Modbus Protocol, PoE Power Supply
Features
This product is a 16-ch relay module designed for industrial environments, featuring dual Ethernet interfaces control. It adopts Modbus RTU / Modbus TCP protocols, supports PoE power supply, also comes with an ABS rail-mount case.
The Modbus POE ETH Relay 16CH is very easy to use. Due to its fast communication, stability, reliability, and safety, it is an ideal choice for industrial control equipment and/or applications with high communication requirements.
- Dual Ethernet ports design, supports Ethernet port communication cascade and PoE power supply cascade
- Features flash-on, flash-off function, it is possible to set the delay closing after opening or delay opening after closing
- Supports DC 7~36V wide range power input and PoE power supply
- Supports relay control through MQTT protocol, comes with Alibaba Cloud MQTT application demo
- Onboard Optocoupler isolation, prevent the relay from being interfered by high-voltage circuit
- Adopts dedicated relay driver chip, with built-in flyback diode protection, for stronger and more stable driving ability
- Reverse-proof circuit, prevent the circuit from being damaged accidentally by incorrect connection
- High quality relay, contact rating: ≤10A 250VAC/30VDC
- Rail-mounted ABS plastic enclosure, easy to install, safe to use
- 4 LEDs and Network indicators for indicating the MCU status and signal transceiving status
Primary function
Supports Sending Modbus RTU/TCP Protocol Commands
Via Ethernet Port to Control Relay and Various Devices
Supports Multiple Communication Modes, Adopts Modbus Protocol
Supports TCP Server / TCP Client / UDP Mode / UDP Multicast / HTTP / MQTT
Supports Modbus RTU protocol/Modbus TCP protocol
Multi Configuration Methods
Supports software and Web Browser Configuration, Obtaining Dynamic IP Via DHCP,
connecting to domain name server via DNS protocol
Multi Power Supply Options, Wide Range Power Input
DC Power port: directly uses a power plug for power supply;
Screw terminal: DC 7~36V wide range power input;
PoE port: IEEE 802.3af PoE compliant
Interfaces & Indicators
With Multiple LED Indicators, Easy to Monitor the Operating Status
|
RUN |
Ethernet port indicator, blinking when Ethernet port normally working |
|
STA |
MCU indicator, blinking when the MCU is normally working |
|
TXD |
TX indicator, lights up when sending data |
|
RXD |
RX indicator, lights up when receiving data |
|
Left Ethernet port Green Indicator |
Lights up when the connection of Ethernet Port 1 is established |
|
Right Ethernet port Green Indicator |
Lights up when the connection of Ethernet Port 2 is established |
|
Left Ethernet Port Yellow Indicator |
Lights up when the TCP connection is established |
|
Right Ethernet Port Yellow Indicator |
Data activity indicator, blinking when transmitting data |
Supports Ethernet Port Cascade and PoE cascade power supply
Onboard 2-ch Ethernet Ports for communication and cascade
Either one can be used for dual serial server network communication, while the other one can be used for cascading or communication with other devices.
* Note: Each module in the cascade needs to be powered individually or using PoE cascade power supply.
The maximum power consumption of a single module is 7W, please pay attention to the output power of the
Router when using PoE cascade power supply.
Relay connection
Contact rating of the onboard relay up to 10A 250VAC/30VDC
Enclosure Design
Rail-mounted ABS plastic enclosure, easy to install, safe to use
Product show
Outline dimensions
