Our Brands

Electromechanical

150 - 164
158 159 160 161 162 163 164 165 166 167 168 169 170 171 172
166 - 180
Newest Items First
15 Per Page
GAMES-05 2-Way/4-Way/8-Way Swappable Restrictor gate – Arcade Control Joystick
US$19.95
2-Way, 4-Way and 8-Way, what do all these way mean? This joystick is incredible because it has a green plate on the bottom that can be screwed in to limit the movement to certain directions. 2-Way allows users to move the joystick left and right only. 4-way allows users to move in the traditional up, down, left and right. The restrictor plates are set in 8-Way position as default allowing you to move the joystick in linear axis and diagonally!
In stock
+ −
Add to wish list
PI-MIC1 USB Microphone for Raspberry Pi & Desktop
US$9.79
This Microphone module is designed to work with any Raspberry Pi device running linux operating system. Great for creating voice recognition software or it can be also used on any windows operating system without the need of installing additional drivers (exception on windows 10). Since it is USB based, you don’t need to use your microphone jack and a usb port to power the unit. This Mic only needs one USB port for power and signal making it a great recommendation for RPI devices.
In stock
+ −
Add to wish list
SRA-12VDC-CL 12VDC 20A Subminature High Power Relay SRA series
US$2.09
Electromechanical Relay rated for 12VDC 20Amps Single Pull, Double Throw that is Normally Open. Recommend for high power systems like Motor Load Switching, and many more.
In stock
+ −
Add to wish list
KN-10W Plastic Knob for Potentiometer with White Indicator
US$0.83
This small plastic knob is designed for potentiometers that have a diameter of 5.5mm, any of our common linear potentiometer will fit on this unit. It also has a white indicator to show the position of the potentiometer. This unit is 1.6 cm long by 1.5cm wide on the base with the top being 0.9cm wide.
In stock
+ −
Add to wish list
KN-10R Plastic Knob for Potentiometer with Red Indicator
US$0.83
This small plastic knob is designed for potentiometers that have a diameter of 5.5mm, any of our common linear potentiometer will fit on this unit. It also has a red indicator to show the position of the potentiometer. This unit is 1.6 cm long by 1.5cm wide on the base with the top being 0.9cm wide.
In stock
+ −
Add to wish list
KN-10OR Plastic Knob for Potentiometer with Orange Indicator
US$0.83
This small plastic knob is designed for potentiometers that have a diameter of 5.5mm, any of our common linear potentiometer will fit on this unit. It also has a orange indicator to show the position of the potentiometer. This unit is 1.6 cm long by 1.5cm wide on the base with the top being 0.9cm wide.
In stock
+ −
Add to wish list
KN-10Y Plastic Knob for Potentiometer with Yellow Indicator
US$0.83
This small plastic knob is designed for potentiometers that have a diameter of 5.5mm, any of our common linear potentiometer will fit on this unit. It also has a yellow indicator to show the position of the potentiometer. This unit is 1.6 cm long by 1.5cm wide on the base with the top being 0.9cm wide.
In stock
+ −
Add to wish list
MOT-E-01 Plastic Incremental Encoder for DC motors
US$1.81
This is a plastic encoder designed to fit on our magician chassis motors or any of the products shown below in related products! This is basically a plastic circle that has 20 slits for light to pass through, the encoder works like any other incremental encoder. The incremental encoder consists of a photocell arrangement as a coded disk with evenly spaced dark and transparent segments on its surface. The disk rotates or moves past the light source generating a stream of square wave pulses that determine the angular position of the shaft.
In stock
+ −
Add to wish list
MOT-H-01 L Bracket for NEMA 17 Stepper Motor
US$4.89
This L bracket was specifically designed for use in 3D printers and CNC machines. The bracket supports the NEMA17 motor. (Product: MOT-SM-17) All addition mounting hardware is included.
In stock
+ −
Add to wish list
MP-PG-165 GT2 pulley (16 teeth) for 6mm belts, 5mm Bore Diameter
US$2.79
This pulley connects the motor to the belt and allows for rotational motor movement to translate into linear directional movement. This type of mechanism is most often seen in 3D printers or CNC machines.
In stock
+ −
Add to wish list
BLT-GT2-426 GT2, 2mm pitch, 6mm wide, 426mm long, close-ended Belt
US$6.99
Excellent for linear movement of x and y axis components. The grooves are 2mm and work effectively on 2mm pitch GT2 tooth pulleys. This belt is close-ended, meaning it circular almost like a band belt.
In stock
+ −
Add to wish list
MOT-SM-17 NEMA 17 Compatible Stepper Motor for 3D Printers and CNC XYZ
US$18.15
A NEMA 17 stepper motor is a stepper motor with a 1.7 x 1.7 inch (42.3 x 42.3 mm) faceplate. The NEMA 17 is larger and generally heavier than for example a NEMA 14, but this also means it has more room to put a higher torque.
In stock
+ −
Add to wish list
TEST-110 3 Channel Servo/ESC Tester 4.8V – 6VDC
US$5.59

This module is designed to test servo motors and electronic speed controllers (ESC). On the bottom of the Output signal the select push button allows users to toggle in three modes. Mode 1) Potentiometer Control to evaluate the reaction time of the output motor manually. Mode 2) Neutral mode to deactivate the tester and allow the speed controller directly control the motor. Mode 3) Automatic to allow the signal to be digitally controlled by the tester. You can connect up to three servos on the output side and be controlled by one input signal.

In stock
+ −
Add to wish list
DRI0043 TB6600 Stepper Motor Driver
US$30.00
TB6600 is an easy-to-use professional stepper motor driver, which could control a two-phase stepping motor. It is compatible with Arduino and other microcontrollers that can output a 5V digital pulse signal. TB6600 stepper motor driver has a wide range power input, 9~42VDC power supply. And it is able to output 4A peak current, which is enough for the most of stepper motors. The stepper driver supports speed and direction control. You can set its micro step and output current with 6 DIP switch. There are 7 kinds of micro steps (1, 2 / A, 2 / B, 4, 8, 16, 32) and 8 kinds of current control (0.5A, 1A, 1.5A, 2A, 2.5A, 2.8A, 3.0A, 3.5A) in all. And all signal terminals adopt high-speed optocoupler isolation, enhancing its anti-high-frequency interference ability. As a professional device, it is able to drive 57, 42-type two-phase, four-phase, hybrid stepper motor.
In stock
+ −
Add to wish list
DFR0398 Romeo BLE Quad - A STM32 Control Board with Quad DC Motor Driver & Bluetooth 4.0
US$69.83
Romeo BLE Quad is an arduino compatible robot controller based on STM32 ARM chip. It inherits all features from the Bluno M3, including wireless programming support, wireless communication between iOS/Android apps and remote control. Beyond this it also includes a 4-way DC motor driver and encoder interfaces. You can implement a robot with PID closed-loop feedback control directly with our TT Geared Motor. As well as this the Romeo BLE Quad offers powerful performance thanks to the STM32 ARM 32-bit microcontroller with more storage space and more interface resources. DFRobot has developed bespoke firmware to make it compatible with Arduino IDE and accessible to beginners to robotics.
In stock
+ −
Add to wish list
150 - 164
158 159 160 161 162 163 164 165 166 167 168 169 170 171 172
166 - 180