Our Brands

Electromechanical

150 - 164
158 159 160 161 162 163 164 165 166 167 168 169 170 171 172
166 - 180
Newest Items First
15 Per Page
AGX/5A, Fuse Glass Fast Blow 5A
US$0.78
Dimensions: 1.00" x .25" (25.4mm x 6mm). Rated: 32VAC (note: voltage may not be indicated on the fuse.).
In stock
+ −
Add to wish list
AGX/4A, Fuse Glass Fast Blow 4A
US$0.78
Dimensions: 1.00" x .25" (25.4mm x 6mm). Rated: 32VAC (note: voltage may not be indicated on the fuse.).
In stock
+ −
Add to wish list
AGX/3A, Fuse Glass Fast Blow 3A
US$0.78
Dimensions: 1.00" x .25" (25.4mm x 6mm). Rated: 32VAC (note: voltage may not be indicated on the fuse.).
In stock
+ −
Add to wish list
AGX/2.5A, Fuse Glass Fast Blow 2.5A
US$0.78
Dimensions: 1.00" x .25" (25.4mm x 6mm). Rated: 32VAC (note: voltage may not be indicated on the fuse.).
In stock
+ −
Add to wish list
AGX/2A, Fuse Glass Fast Blow 2A
US$0.78
Dimensions: 1.00" x .25" (25.4mm x 6mm). Rated: 32VAC (note: voltage may not be indicated on the fuse.).
In stock
+ −
Add to wish list
AGX/10A, Fuse Glass Fast Blow 10A
US$1.11
Dimensions: 1.00" x .25" (25.4mm x 6mm). Rated: 32VAC (note: voltage may not be indicated on the fuse.).
In stock
+ −
Add to wish list
AGX/1A, Fuse Glass Fast Blow 1A
US$0.78
Dimensions: 1.00" x .25" (25.4mm x 6mm). Rated: 32VAC (note: voltage may not be indicated on the fuse.).
In stock
+ −
Add to wish list
RM-XH-M138 120VAC 30A High Current Dual Output Relay Controller Board with 12VDC Logic
US$12.59
This is a simple relay board that is controlled by a 12VDC input voltage. This is an ideal product for creating a switch activated by a 12VDC source, such as an output voltage of a motion sensor, valve or solenoid.
In stock
+ −
Add to wish list
S3003 Analog Standard Servo, S3003 Compatible
US$12.53
This a compatible s3003 servo motor that operates from 4 to 6v and offers torque ranging from 3.17kg to 4.10kg per cm. Great for standard applications and robotic movement, please note this motor is not continuous and has a set angle that it can turn of 180 degrees software wise. Include with the motor are four unique servo mounting heads (spindles/arms). Four rubber dampers to fasten the unit and four screws to fasten a servo attachment arm.
In stock
+ −
Add to wish list
17MOMTS32 Momentary Pushbutton Switch N.O.
US$1.16
Type: Momentary Normally Open SPST. Switch Body Diameter: 6.4mm. Overall Body Length: 13.5mm. Button Diameter: 2.6mm. Mounting Hole Diameter: 4mm. Terminal Type: PCB Mounting. Contact Rating: 500mA @120 VAC or 28 VDC. Electrical Life: 30,000 make and break cycles at full load. Contact Resistance: 20 mΩ max. initial @2-4 VDC,100 mA. Insulation Resistance: 1,000 MΩ min. Dielectric Strength: 500 V RMS @ sea level. Operating Temperature: -30°C to 85°C.
In stock
+ −
Add to wish list
44-573-0 Momentary Pushbutton Switch N.O.
US$3.84
Type: Momentary Normally Open SPST. Switch Body Diameter: 10mm. Overall Body Length: 19mm. Button Diameter: 10mm. Mounting Hole Diameter: 7mm. Terminal Type: Solder Lug. Contact Rating: 1A @125VAC.
In stock
+ −
Add to wish list
NO-110-BLACK Momentary Pushbutton Switch N.O.
US$0.53
Type: Single Pole Single Throw (SPST). Rating: 0.5A / 24V momentary contact. Connections: Solder pins. Mounting Diameter: 0.275" with locknut for chassis mounting. Threaded Shaft Length: 0.25". Switch Body Diameter: 0.375". Switch Body Length: 0.65".
In stock
+ −
Add to wish list
SW-EMERG1 Emergency Stop Switch
US$13.18
This pushbutton Emergency Stop Switch comes mounted in a handy plastic enclosure. The switch has two sets of contacts one N/O and one N/C. Pushing the switch latches the contacts in the opposite condition. Turning the button releases the latched condition to return to normal operation.
In stock
+ −
Add to wish list
GAMES-JB-01R Red Handle Ball - Arcade Joystick Replacement
US$7.69
This is a generic red ball that has a threaded screw mount to fit onto any Sanwa, Seimitsu and Zippy Joystick controls. If you want to replace any broken top or change the color scheme without having to replace the entire unit, then this product is ideal. Color: Red. Weight: 25.1g. Diameter: 35.25 mm. Screw/Threading: 5 x 10 mm (Dia. x Depth).
In stock
+ −
Add to wish list
GAMES-JB-01Y Yellow Handle Ball - Arcade Joystick Replacement
US$7.69
This is a generic yellow ball that has a threaded screw mount to fit onto any Sanwa, Seimitsu and Zippy Joystick controls. If you want to replace any broken top or change the color scheme without having to replace the entire unit, then this product is ideal. Color: Yellow. Weight: 25.1g. Diameter: 35.25 mm. Screw/Threading: 5 x 10 mm (Dia. x Depth).
In stock
+ −
Add to wish list
150 - 164
158 159 160 161 162 163 164 165 166 167 168 169 170 171 172
166 - 180