Our Brands

Electromechanical

140 - 154
148 149 150 151 152 153 154 155 156 157 158 159 160 161 162
156 - 170
Newest Items First
15 Per Page
FIT-3/4-ADH Heat Shrink Tubing with Adhesive, 3/4 Inch, 4 Ft.
US$12.53
Perfect for creating weatherproof seals around and between connections and cables, this heat shrink features an adhesive lining that flows when heated, then cools to create a tight bond. Shrinks to one half the original diameter when heated.
In stock
+ −
Add to wish list
FIT-1/2-ADH Heat Shrink Tubing with Adhesive, 1/2 Inch, 4 Ft.
US$9.72
Perfect for creating weatherproof seals around and between connections and cables, this heat shrink features an adhesive lining that flows when heated, then cools to create a tight bond. Shrinks to one half the original diameter when heated.
In stock
+ −
Add to wish list
FIT-3/8-ADH Heat Shrink Tubing with Adhesive, 3/8 Inch, 4 Ft.
US$8.33
Perfect for creating weatherproof seals around and between connections and cables, this heat shrink features an adhesive lining that flows when heated, then cools to create a tight bond. Shrinks to one half the original diameter when heated.
In stock
+ −
Add to wish list
FIT-5/16-ADH Heat Shrink Tubing with Adhesive, 5/16 Inch, 4 Ft.
US$6.94
Perfect for creating weatherproof seals around and between connections and cables, this heat shrink features an adhesive lining that flows when heated, then cools to create a tight bond. Shrinks to one half the original diameter when heated.
In stock
+ −
Add to wish list
FIT-1/4-ADH Heat Shrink Tubing with Adhesive, 1/4 Inch, 4 Ft.
US$5.53
Perfect for creating weatherproof seals around and between connections and cables, this heat shrink features an adhesive lining that flows when heated, then cools to create a tight bond. Shrinks to one half the original diameter when heated.
In stock
+ −
Add to wish list
FIT-3/16-ADH Heat Shrink Tubing with Adhesive, 3/16 Inch, 4 Ft.
US$4.82
Perfect for creating weatherproof seals around and between connections and cables, this heat shrink features an adhesive lining that flows when heated, then cools to create a tight bond. Shrinks to one half the original diameter when heated.
In stock
+ −
Add to wish list
FIT-1/8-ADH Heat Shrink Tubing with Adhesive, 1/8 Inch, 4 Ft.
US$4.13
Perfect for creating weatherproof seals around and between connections and cables, this heat shrink features an adhesive lining that flows when heated, then cools to create a tight bond. Shrinks to one half the original diameter when heated.
In stock
+ −
Add to wish list
Controllable Four Outlet Power Relay Module version 2 - (Power Switch Tail Alternative)
US$54.55
Say goodbye to hazardous high voltage wiring and create the Internet of Things with safe, reliable power control. The IoT Power Relay from Digital Loggers is custom designed to fit your every need when developing projects with Raspberry Pi, Arduino, Adafruit Feather, or any other microcontroller board! This beefy relay power module is well designed and is great when you need to control more than one outlet at a time.
In stock
+ −
Add to wish list
SEN0230 Incremental Photoelectric Rotary Encoder - 400P/R
US$48.13
This is an industrial incremental photoelectric rotary encoder with aluminum material, metal shell and stainless steel shaft. It generates AB two-phase orthogonal pulse signal though the rotation of the grating disk and optocoupler. 400 pulses/round for each phase, and 1600 pulses/round for dual-phase 4 times output. This rotary encoder supports max 5000 r/min speed. And it can be used for speed, angle, angular velocity and other data measurement. The photoelectric rotary encoder has a NPN open collector output. It could work with Microcontroller with internal pull-up resistors directly. And it is using 750L05 voltage regulator chip, which has a DC4.8V-24V wide range power input, compatible with Arduino, STM32, PLC and other types of microcontrollers.
In stock
+ −
Add to wish list
JK42HS40-1304F Nema 17 Hybrid Stepper Motor: 42x40mm, 200 Steps/Rev, 3.4VDC, 1.3A/Phase, 4.1Kg/cm
US$22.70
This is a generic 2 phase Nema17 hybrid stepper motor. It has a stepping angle of 1.8° and can complete a full circle in 200 steps. This motor has 2 phases and it is recommend to supply 1.3 amps per each phase.
In stock
+ −
Add to wish list
MOT-110 3VDC Coin Cell Vibration Motor (12 x 3.4mm)
US$2.26
This flat coin shaped motor operates at 3 to 3.3VDC and vibrates when you supply power. The motor is not polarity sensitive, meaning you could connect the battery either way and it would behave the same. This product is excellent for hepatic feedback on any project you may have in mind. The provided leads are short and will require some 24-26 awg cable for extension or creating the pads on your board a bit closer. The cables extend to about 1cm. The provided black rubber will help keep noise down and when touching the motor after long usage, this particular product won’t heat up.
In stock
+ −
Add to wish list
AZ420-70-4H Relay DPDT 24VDC 5 AMPS
US$13.93
Features: Coil resistance 700Ω. 2 FORM C . Related products: PC mount Socket # R95-102.
In stock
+ −
Add to wish list
HTSYG048B030 30 RPM 115 VAC INLINE GEARMOTOR
US$3.95
Specifications: Amps 0.03, 3 Watts, Duty continuous, Shaft 5/32" square, 1/4" long, Four bolt mount on 2-1/4" B.C., Overall size 2" dia. x 7/8" long, Weight: 1/4 lb. Motor typically rotates CW, by design it will sometimes rotate CCW.
In stock
+ −
Add to wish list
MOT-775 7k RPM 775 Spindle Motor for 3-Axis CNC kit
US$15.42
This is a replacement product for the CNC-KIT-01. Excellent for attaching drill bits for milling, drilling and etching! Note: does not include cable.
In stock
+ −
Add to wish list
BUZ-200-12MM 12mm Piezo Element
US$0.92
This Piezoelectric element can turn any mechanical energy into electrical energy (AC). For this reason, you can use it as a knock or tap sensor. You can also implement it in any of your Arduino projects by connecting it to the analog inputs of the microcontroller (see link for more details). You can feed the sensor AC voltage as well. This (coupled with the right frequency) can turn the element into a buzzer or speaker. You won’t need to worry about soldering any leads as they come with pre-soldered red and black wires. Note that this sensor in particular has a diameter of 12mm.
In stock
+ −
Add to wish list
140 - 154
148 149 150 151 152 153 154 155 156 157 158 159 160 161 162
156 - 170