Electromechanical

US$1.68
Arcade Momentary Pushbutton 33mm Body, 33mm Bezel, Pink. This arcade momentary pushbutton comes in a variety of colors enabling any hobbyist to make an attractive game console. The good sized button provides excellent tactile feedback.
In stock
+
Add to wish list

US$1.68
Arcade Momentary Pushbutton 28mm Body, 33mm Bezel, Green. This arcade momentary pushbutton comes in a variety of colors enabling any hobbyist to make an attractive game console. The good sized button provides excellent tactile feedback.
In stock
+
Add to wish list

US$1.68
rcade Momentary Pushbutton 28mm Body, 33mm Bezel, Yellow. This arcade momentary pushbutton comes in a variety of colors enabling any hobbyist to make an attractive game console. The good sized button provides excellent tactile feedback.
In stock
+
Add to wish list

US$4.89
Functionality: Relay Construction: Non-Latching. Coil Current: 25 mA. Coil Resistance: 200 Ohm. Dimensions: 19.5 x 7.62 x 5.9 mm.
In stock
+
Add to wish list

US$4.19
Termination: 1 Form A. Coil Resistance: 125Ω. Dimensions: 22 x 16 x 11 mm (L x W x H).
In stock
+
Add to wish list

US$1.35
Switch, Slide DPDT ON-ON, 125V 3A (AC), 500mA (DC)
Delivery within 2-3 weeks
+
Add to wish list

US$18.19
Functionality: Relay Construction: Non-Latching. Coil Current: 2A. Coil Resistance: 167 Ohm. Dimensions: 20.2 x 9.8 x 12.5 mm.
In stock
+
Add to wish list

US$2.23
Dimensions: 0.65 x 0.46 x 0.42” (16.51 x 11.68 x 10.66 mm).
Delivery within 2-3 weeks
+
Add to wish list

US$2.49
Article used primarily in multimeter applications.
In stock
+
Add to wish list

US$3.99
This is a simple breakout board that features 20 pushbuttons, 16 of the black pushbuttons are designed to work as a pushbutton array requiring only 8 digital wires. 4 of the red push buttons are inversed logic, when the buttons is pressed it will go to ground and when not pressed the wires connected at the jumper pins will send signals to the microcontroller. You need an additional four digital pins if you choose to use this feature. You also are provided with 8 leds that offer their output signal to be grounded. This board is excellent for testing and learning array programming in C. This product comes with four standoffs M-F and nuts.
In stock
+
Add to wish list

US$0.55
This device is a screw type inline fuseholder for 5x20mm fuses. Length: 21.10cm (8.31 inch). Fuse not included. For GMA or GMD series fuses.
In stock
+
Add to wish list

US$0.98
This article is a tiny 8 ohm ¼ Watt speaker measuring 29mm in diameter.
In stock
+
Add to wish list

US$55.99
The digital version of our popular HS-645 is the HS-5645MG, featuring a programmable digital circuit and our custom MP/metal gear train technology. Perfect for larger airplanes and heli’s, the HS-5645MG will deliver higher resolution and torque than its analog brother. Note: Metal Horn (R-ML) Included.
In stock
+
Add to wish list

US$4.50
This device is a 20 (4x5) key position keypad membrane switch. Voltage DC: 12V. Current: 30mA. Contact Resistance: >=100 Ohm. Force: 250-350g. Contact Bounce: >1s. Pad Size: 85 x 73 x 0.8mm/ 3.3'' x 2.87'' x 0.03'' (L*W*T). Cable Length: 103mm/ 4''. Connector Pitch: 2.54mm/ 0.1''. Connector 9 positions.
In stock
+
Add to wish list

US$6.26
Super Heavy Duty Karbonite servo horn set. These servo horns can be used with all standard size Hitec Karbonite servos. Included: 1 x Wheel Type Heavy Duty Karbonite Servo Arm. 1 x Two Arm Type Heavy Duty Karbonite Servo Arm. 1 x Single Arm Type Heavy Duty Servo Arm. 4 x Rubber Grommets. 4 x Brass Eyelets. 4 x Mounting Screws.
In stock
+
Add to wish list