Our Brands

Electromechanical

129 - 143
137 138 139 140 141 142 143 144 145 146 147 148 149 150 151
145 - 159
Newest Items First
15 Per Page
PBS-LED-120W-BL Blue Wire stranded 20 AWG cut & stripped 21cm. long (8.25”) attached with quick disconnect terminal 0.110”
US$0.76
Blue wire stranded 20 AWG cut & stripped 21cm. long (8.25”) attached with quick disconnect terminal 0.110” for use with PBS-LED-120W series switches.
In stock
+ −
Add to wish list
PBS-LED-120W-RD Red Wire stranded 20 AWG cut & stripped 21cm. long (8.25”) attached with quick disconnect terminal 0.110”
US$0.76
Red wire stranded 20 AWG cut & stripped 21cm. long (8.25”) attached with quick disconnect terminal 0.110” for use with PBS-LED-120W series switches.
In stock
+ −
Add to wish list
PBS-LED-120W-Y Yellow Wire stranded 20 AWG cut & stripped 21cm. long (8.25”) attached with quick disconnect terminal 0.110”
US$0.76
Yellow wire stranded 20 AWG cut & stripped 21cm. long (8.25”) attached with quick disconnect terminal 0.110” for use with PBS-LED-120W series switches.
In stock
+ −
Add to wish list
MOT-ACT-BR Mounting Bracket for Linear Actuators – H-Type - Pair
US$9.94
This H-style metal bracket allows you to mount your linear actuator against any solid surface by bolting it using the proper screws. It includes an M5 screw and bolt to mount the bracket against the actuator. Additional bolts are required to mount the bracket against your mounting surface. This kit includes a pair of metal brackets with a pair 5mm bolt and nut.
In stock
+ −
Add to wish list
R25-11D10-24 PC Mount Sealed Relay 2Form C, 24 VDC DPDT, 10A
US$11.98
Relay PCB, DPDT 2 Form C, 24VDC 10 amperes. Features: Coil Voltage VDC Nom: 24V. Contact Current Max: 10A. Contact Voltage AC Nom: 440V. Contact Voltage DC Nom: 28V. Coil Resistance: 1.1kohm.
In stock
+ −
Add to wish list
MOT-17HS8401B 17HS8401B Nema 17 42x42x48mm 1.7A Bi-Polar Dual Phase 1.8° Stepper Motor
US$27.93
17HS8401 bi-polar stepper motors are used very commonly in a lot of 3D printers and RepRap CNC machines. It can also be used in general control machinery, automation and robotics applications. A NEMA 17 stepper motor is a stepper motor with a 1.7 x 1.7 inch (42.3 x 42.3 mm) faceplate. The motor conveniently connects via a typical 6 pin JST connector. This unit comes with a 6-pin female JST to 4 pin female header cable.
In stock
+ −
Add to wish list
BUZ-110 30mm Piezo Element with Enclosure and Power Cable
US$1.25
Underneath the plastic enclosure sits a 30mm diameter piezo element that is nicely enclosed with mounting holes so you can attach easily to your desired surface. The way Piezo works is by converting vibration to voltage and vise-versa, using a very thin and vibration-sensitive mesh. Meaning that it can be used as a buzzer or it can be used to detect vibrations which cause the piezo to generate analog voltage that a micro controller can read.
In stock
+ −
Add to wish list
2966-POLOLU MP6500 Stepper Motor Driver Carrier, Potentiometer Current Control
US$15.42
This breakout board for the MPS MP6500 microstepping bipolar stepper motor driver is Pololu’s latest stepper motor driver. The module has a pinout and interface that are very similar to that of our popular A4988 carriers, so it can be used as a drop-in replacement for those boards in many applications. The MP6500 offers up to 1/8-step microstepping, operates from 4.5 V to 35 V, and can deliver up to approximately 1.5 A per phase continuously without a heat sink or forced air flow (up to 2.5 A peak). This version of the board uses an on-board trimmer potentiometer for setting the current limit, and the board ships with 0.1″ male header pins included but not soldered in.
In stock
+ −
Add to wish list
2369-POLOLU 210:1 Micro Metal Gearmotor MP 6V
US$22.33
This gearmotor is a miniature medium-power, 6 V brushed DC motor with a 210.59:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. Key specs at 6 V: 100 RPM and 40 mA with no load, 36 oz-in (2.6 kg-cm) and 0.7 A at stall.
In stock
+ −
Add to wish list
2370-POLOLU 250:1 Micro Metal Gearmotor MP 6V
US$22.33
This gearmotor is a miniature medium-power, 6 V brushed DC motor with a 248.98:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. Key specs at 6 V: 90 RPM and 40 mA with no load, 41 oz-in (3.0 kg-cm) and 0.7 A at stall.
In stock
+ −
Add to wish list
2968-POLOLU MP6500 Stepper Motor Driver Carrier, Digital Current Control
US$15.42
This breakout board for the MPS MP6500 microstepping bipolar stepper motor driver is Pololu’s latest stepper motor driver. The module has a pinout and interface that are very similar to that of our popular A4988 carriers, so it can be used as a drop-in replacement for those boards in many applications. The MP6500 offers up to 1/8-step microstepping, operates from 4.5 V to 35 V, and can deliver up to approximately 1.5 A per phase continuously without a heat sink or forced air flow. This version of the board allows for dynamic current limit control through a pair of digital inputs, and the board ships with 0.1″ male header pins included but not soldered in.
In stock
+ −
Add to wish list
3134-POLOLU Tic T500 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)
US$62.17
The Tic T500 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC). This version incorporates an MPS MP6500 driver and male headers and terminal blocks are included but not soldered. It can operate from 4.5 V to 35 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (or 2.5 A max with sufficient additional cooling).
In stock
+ −
Add to wish list
MOT-17HS6401 1.8° 2 Phase Nema 17 Stepper Motor 60mm 1.5A 0.65NM
US$32.53
Welcome to the longest body, highest torque Nema 17 Stepper motor. It is a two phase 4 lead wires bipolar stepper motor with 1.8 degree per step. It is rated at 1.5A and 4VDC. It is recommended to be driven by a DRV8825, TMC2130 or higher amperage rated stepper motor driver.
In stock
+ −
Add to wish list
SOL-12V-5KG 12VDC 5Kg/11Lbs Electromagnetic Solenoid Lifting Magnet
US$11.94
This device acts like a controllable magnet that can lift up to 5Kg. It runs on 12 VDC and is magnetized when you supply voltage. The frame is composed on metal and the current draw of the device is 0.34A with a modest power consumption of 4W. The holding force is 50N or 11 lbs and it has a M4 screw thread tapped at the back for mounting. The unit size is approximately 25mm x 20mm.
In stock
+ −
Add to wish list
2519-POLOLU Dual MAX14870 Motor Driver Shield for Arduino
US$37.42
This small shield is an easy, economical way to control two small brushed DC motors with an Arduino or Arduino-compatible board. Its two integrated MAX14870 motor drivers allows it to operate from 4.5 V to 36 V, making it a great for higher-voltage motors and applications, and the shield can 1.7 A continuous (2.5 A peak) per motor. The shield can optionally be configured to power the Arduino from the same power supply as the motor driver, and the Arduino pin mappings can be customized (by cutting traces) if the defaults are not convenient.
Delivery within 2-3 weeks
+ −
Add to wish list
129 - 143
137 138 139 140 141 142 143 144 145 146 147 148 149 150 151
145 - 159