Motors

geeekus 90 Degrees Analog Servo Motor 9G

The geeekus 90 degeree 9G servo motor comes with a set of 4 horns (unlike similar SG90 servos which come with 3) and is excellent for students, hobbyists or educators who want to make stuff move. The servo has three interfaces,distinguished by brown, red and orange line (sometimes colors differ). Brown line is for GND, red one for power 5V, orange one for signal terminal (PWM signal).

Learn More

 

Metal Gear Digital Servo for Arduino Robot with Hardware

This is a high quality digital robot servo. Included are U shaped brackets and aluminum servo round horn set spline 25T. This servo is used in robots or where standard servos are used. This servo can produce high-current draw from your batteries. If using NiMH or LiPo batteries, make sure they are capable of delivering approximately 2A for each servo. This servo also has different applications for DIY robot. Learn More

 

Continuous rotation servo and wheel combo

This kit includes the FS90R-W Wheel and the FS90R Servo.

FS90R: Micro 1.3kg.cm 360 Degree Continuous Rotation Servo

The FS90R is a micro-sized servo built for continuous rotation. At 6 V, it has a maximum rotation speed of around 130 RPM (no-load) and can produce up to 21 oz-in (1.5 kg-cm) of torque.

FS90R-W: Wheel for FEETECH FS90R Micro Servo, 60×8mm - Black

Designed specifically for use with FS90R micro continuous rotation servos from FEETECH (formerly known as Fitec), and the combination can serve as a small, inexpensive, and easy-to-control drive system for a miniature robot.

Learn More

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
9 - 23
US$3.59

The geeekus ULN2003 stepper motor driver board is a high quality compact module which allows you to control the 28BYJ-48 stepper motor. Because the 28BYJ-48 stepper motor consumes a significant amount of power, it cannot be controlled directly by a microcontroller like the Arduino. To control the motor, a driver IC such as the ULN2003 is required.

In stock
+
Add to wish list

US$12.49

This is a high torque geared DC motor with a geared-down output shaft. It consist of a DC motor with metal geared transmission bolted onto it. It is capable of delivering high amount of torque for your various needs

In stock
+
Add to wish list

US$17.06

L-VIB-DRIVER  26051 Haptic Driver Module Replacement part

In stock
+
Add to wish list

US$1.68

 MOT-10-3V 3VDC Mini Motor 18000 RPM 

In stock
+
Add to wish list

US$5.41

This is a mini DC motor running at 3~6 volts with 3700~11500 RPM range.

In stock
+
Add to wish list

US$9.05
The geeekus L298N Dual Motor Driver allows full control of two DC Motors or one stepper-motor. Coupling the L298N H-Bridge with our geeekus Arduino UNO will give you the ability to control both the speed and rotation direction of two DC motors.
In stock
+
Add to wish list

US$45.36
Based on the ESP32-WROOM-32 module, supports wireless communication such as WIFI, Bluetooth and ESP-NOW. Onboard motor control interfaces for 2x DC motor with encoder or 4x DC motor (2 groups) without encoder. Onboard serial bus servos control interfaces for controlling up to 253 ST3215 serial bus servos and obtaining servos feedback. Onboard 9-axis IMU to obtain attitude and heading information at any time. Supports 7~13V power input, and can be powered directly by 2S or 3S lithium battery module. Automatic download circuit for easy uploading programs.
In stock
+
Add to wish list

US$1.77
The wheels have silicone tires and measure 60 mm (2.36″) in diameter. Two additional mounting holes for 4-40 screws make it possible to use the wheel with our universal mounting hubs for 3mm shafts, 4mm shafts, and 5mm shafts.
In stock
+
Add to wish list

US$2.68
Suggested Voltage: 3VDC, No Load Speed: 50 ±10 rpm, No Load Current: 150mA, Stall Current: 750mA, Torque: 3Kgf.cm min.
In stock
+
Add to wish list

US$2.68
Suggested Voltage: 3VDC, No Load Speed: 50 ±10 rpm, No Load Current: 150mA, Stall Current: 750mA, Torque: 3Kgf.cm min.
In stock
+
Add to wish list

US$0.91
Motor 3VDC 7200 RPM 140mA
In stock
+
Add to wish list

US$12.60
9-60VDC 20A PWM DC Motor Speed Controller The PWM driver board can be used for DC motors. The driver voltage 9-60V. Note: This PWM controller...
In stock
+
Add to wish list

US$2.68
This is a small vibration motor suitable as a non audible indicator. When the input is high, the motor vibrates, just like your phone in silent mode....
In stock
+
Add to wish list

US$6.32
The MC33035 is a high performance second generation monolithic brushless DC motor controller containing all of the active functions required to implement a...
In stock
+
Add to wish list

US$1.77
5515-ADA, Shrouded Servo to Premium Male Jumper Wires Cable - 17cm long
Delivery within 2-3 weeks
+
Add to wish list
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
9 - 23