Our Brands

Drafting Patterns/Transfers/Film

ABRA stocks a wide variety of circuit board drafting patterns, transfers, drafting film and other material for circuit board artwork.
Newest Items First
15 Per Page
TTP-10 PCB Circuit Board Thermal Transfer Paper
US$4.98
This paper allows you to print a circuit pattern and make your own printed circuit boards. There is a silicone (shiny) side and a dull matte side. Print your circuit pattern using a laser printer (does not work with inkjet) on the shiny silicone side. Transfer the printed pattern to your circuit board using any standard iron for clothes or a laminator if available. Etch the PCB in a ferric chloride solution to remove the unwanted copper that will leave just the circuit pattern remaining. Package of ten A4 size sheets (30x21mm).
In stock
+ −
Add to wish list
50-1505 Double sided FlexPCB
50-1505 Double sided FlexPCB
US$37.73
This is two flexible panel sheets of double sided copper for making flat PCB designs. It will allow you to make the same high quality PCB's you are used to making with our .032" rigid laminate allowing for extremely fine trace pitch with etch times down to a minute (using our "Contact Etch" technique).
In stock
+ −
Add to wish list
TTS-10 PCB Artwork Transfer Paper - 10 sheets
TTS-10 PCB Artwork Transfer Paper - 10 sheets
US$33.62
"Toner Transfer System" means more than just specially coated "water-slide" transfer paper that is much thinner than ordinary decal paper offered by many vendors. The light "basis-weight" paper is extremely flexible so that it can be run through the most complex of full-color laser printers and copiers without EVER jamming. 10 sheets, 8½" x 11" TTS-10). 17" x 22" instruction set in full color. 
In stock
+ −
Add to wish list
TRF-WHITE Toner Reactive Foil - White
TRF-WHITE Toner Reactive Foil - White
US$18.13

Get Fantastic Etching Results with the TRF Toner Reactive Foils. Foil packs are 8" wide by 15' long with simple instructions. "WhiteTRF" is for adding a "silkscreen" layer to your board. After the board is completed, apply your silkscreen artwork the same way as the layout was. 

In stock
+ −
Add to wish list
12-500-DTK Copy Clear Sheets - 8½" x 11" (5 Sheets)
12-500-DTK Copy Clear Sheets - 8½" x 11" (5 Sheets)
US$8.39
These are copy clear sheets used in laser printers & most dry toner copy machines to make film positives. Great for copying circuits from magazine or printing out circuits designed on PC Datak.
In stock
+ −
Add to wish list
12-710 NEG-FAST Generation II Film - 4oz. each of developer and fier concentrates
12-710 NEG-FAST Generation II Film - 4oz. each of liquid developer and fixer concentrates
US$11.19

Neg-fast Generation II Film allows users to quickly create a negative from their paper or transparent positive artwork. This is U/V sensitive and should be handled under subdued light; we recommend a yellow light of about 25 watts.

In stock
+ −
Add to wish list
12-720 NEG-FAST Generation II Film - Package of 6 NEG-Fast sheets, 5"x6"
12-720 NEG-FAST Generation II Film - Package of 6 NEG-Fast sheets, 5"x6"
US$11.19

Neg-fast Generation II Film allows users to quickly create a negative from their paper or transparent positive artwork. This is U/V sensitive and should be handled under subdued light; we recommend a yellow light of about 25 watts.

In stock
+ −
Add to wish list
MS-21 Drafting Film For PC - 8.5" x 11" (2 sheets)
MS-21 Drafting Film For PC - 8.5" x 11" (2 sheets)
US$5.53
A translucent polyester film for use as a carrier film on which drafting symbols can be placed to make original artwork. One side is a matte finish to accept pencil or ink.
In stock
+ −
Add to wish list