8MT-50 Static Mixer Tip for 2 part cartridge system (pack/5)

Price:
CA$18.30
8MT-50
In stock
+
Add to wish list

The 8MT Mixing Tips are single use static mixers for 2-part low to medium viscosity cartridge systems.

The mixer works using stationary elements inside a narrow cylindrical tube. This forces the materials to combine as it travels through the length of the mixer and provides a homogenous mix of hardener and resin that can be applied directly onto the targeted area.

Simply remove the cartridge nut and plug, attach the static mixer to the tip, and re-screw on the nut to hold the mixer in place. To reuse a partially filled cartridge with the single use static mixer, simply remove the nut and plug preserving the remaining epoxy in the cartridge, and affix a new mixing tip to the end.

The 8MT-50 Mixing Tip unit features a standard flow tip while the 8MT-50FT has a fine tip for greater precision dispensing. It is designed to dispense an even and accurate amount of compound eliminating spoilage. Simply attach the tip to dual cartridge end and twist to lock. To reuse a partially filled cartridge, simply remove the cap preserving the remaining epoxy in the cartridge, and affix a new mixing tip to the end.

 Characteristics

  • Allow precise application directly where you need it
  • Provides homogeneous mixture of low to medium viscosity 2-part systems

 

Référence de Catalogue
Catalog number  

# Éléments
# Elements

Elément Largeur
Element Width

Diamètre Interne
Inner Diameter

Longueur Total
Total Length

Pour usage avec
For Use With

8MT-50

16

5.3mm

1.5mm

90.7mm

8329TFM-50ML 
8329TFS-50ML 

Notice for California Residents: Warning symbolWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov