Our Brands

3D /CNC/Mechanical Parts

70 - 84
78 79 80 81 82 83 84 85 86 87 88 89 90 91 92
86 - 100
Newest Items First
15 Per Page
MP-LBB-8L LM8LUU Linear Ball Bearing for 8mm Smooth Rods
US$4.19
These chromium steel ball bearings attach to any smooth linear rods allowing support or movement by attaching using zip ties or specialized clamps. It is great to be used in CNC and 3D printing machines for smooth linear movement.
In stock
+ −
Add to wish list
MOT-17HS8401B 17HS8401B Nema 17 42x42x48mm 1.7A Bi-Polar Dual Phase 1.8° Stepper Motor
US$27.93
17HS8401 bi-polar stepper motors are used very commonly in a lot of 3D printers and RepRap CNC machines. It can also be used in general control machinery, automation and robotics applications. A NEMA 17 stepper motor is a stepper motor with a 1.7 x 1.7 inch (42.3 x 42.3 mm) faceplate. The motor conveniently connects via a typical 6 pin JST connector. This unit comes with a 6-pin female JST to 4 pin female header cable.
In stock
+ −
Add to wish list
CNC-MC-303 Aluminum Semi-Flex Shaft Coupler for Stepper Motors - 5mm to 8mm
US$7.99
Connect this to that with a set-screw coupler. These couplers are made of machined aluminum and have a spiral cut that makes them slightly flexible so they can be fit to two shafts even if they are not perfectly co-linear and will help reduce binding effects.
In stock
+ −
Add to wish list
MP-B-70 70mm ID 16014zz Open Ball Bearing Ring
US$17.97
This is a deep grooved ball bearing with a bore diameter of 70mm. It delivers a heavy duty performance when dealing with lateral and rotational load. It is widely used in robotics and in the automotive industry such as in go karts and shaft bearing etc. as well as in DIY projects to stabilize and smoothen the rotational movement of a shaft. These bearings are pre-lubricated with grease.
In stock
+ −
Add to wish list
3D-E-008-V1.6 RAMPS 1.4 V1.6 Arduino Mega Shield for 3D Printers
US$19.95
RepRap Arduino Mega Pololu Shield, or RAMPS for short. It is designed to fit the entire electronics needed for a RepRap-style 3D printer or any custom built 3D printer in one small package for low cost.
In stock
+ −
Add to wish list
MP-BS-BJ5 SQ5 M5 90 Degrees Aluminum Connector with Ball Joint
US$2.98
This is smooth moving, low friction, high performance and long life 90 degrees ball joint connector. It features a steel male M5 threaded screw with an M5 threaded inlet hole for an M5 screw to be mounted in.
In stock
+ −
Add to wish list
MP-KIT-BJR Delta 3D Printer Movement Kinematics Kit- 200mm
US$27.93
This kit includes an assortment of parts that allow your delta-style 3D Printer to function the way it is meant to be. It consists of a set of six 200mm long carbon rods, twelve magnetic ball joints along with their screws.
In stock
+ −
Add to wish list
3D-HANDLE-90 90mm Plastic Handle for 3D Printers/CNC Machines
US$5.41
Made from solid ABS plastic, this handle allows your DIY machine enclosure to have a professional look to it. The grip part is 90mm long and has a rough matte finish to it.
Delivery within 2-3 weeks
+ −
Add to wish list
MP-BR-9020L 4mm Thick L-Shaped 90 Degrees Aluminum Bracket for Aluminum Extrusions
US$12.51
Made from high quality machine-cut aluminum, this 4mm thick L-bracket will fix most of your frame vibration issues. It can be used on all V-Slot and T-Slot Aluminum extrusions of any size. Place one bracket at each corner for extra rigidity!
In stock
+ −
Add to wish list
MP-BR-9020T 4mm Thick T-Shaped 90 Degrees Aluminum Bracket for Aluminum Extrusions
US$8.14
Made from high quality machine-cut aluminum, this 4mm thick T-bracket will fix most of your frame vibration issues. It can be used on all V-Slot and T-Slot Aluminum extrusions of any size. Place one bracket at each corner for extra rigidity!
In stock
+ −
Add to wish list
MOT-17HS6401 1.8° 2 Phase Nema 17 Stepper Motor 60mm 1.5A 0.65NM
US$32.53
Welcome to the longest body, highest torque Nema 17 Stepper motor. It is a two phase 4 lead wires bipolar stepper motor with 1.8 degree per step. It is rated at 1.5A and 4VDC. It is recommended to be driven by a DRV8825, TMC2130 or higher amperage rated stepper motor driver.
In stock
+ −
Add to wish list
350mm MGN12H Linear Actuator with MGN12H Block for 3D Printers/CNC Machines
US$41.99
If you are looking for a linear movement actuator for your DIY machine that is more robust and smooth than the regular rods, look no further. This actuator consist of high precision machine-cut linear rail MGN12 along with a sliding pillow block MGN12H.
In stock
+ −
Add to wish list
MP-LR9-400 MGN9 400mm Linear Actuator with MGN9H Block for 3D Printers/CNC Machines
US$40.59
This actuator consist of high precision machine-cut linear rail MGN9 along with a sliding pillow block MGN9H.
In stock
+ −
Add to wish list
MP-LR9-300 MGN9 300mm Linear Actuator with MGN9H Block for 3D Printers/CNC Machines
US$36.39
This actuator consist of high precision machine-cut linear rail MGN9 along with a sliding pillow block MGN9H.
In stock
+ −
Add to wish list
MP-B-623ZZ 3x10x4mm 623ZZ Metal Sealed Bearing
US$1.99
This is a deep grooved ball bearing with a bore diameter of 3mm. It is commonly used in motor shafts to stabilize and smoothen the movement of a rotating shaft. These bearings are pre-lubricated with grease.
In stock
+ −
Add to wish list
70 - 84
78 79 80 81 82 83 84 85 86 87 88 89 90 91 92
86 - 100