WIFI-LPB100-B WiFi Module, External Antenna
WIFI-LPB100-B is a WiFi module with external antenna connector.
Features
- Independently developed MCU platform, high cost performance
- Ultra low power consumption, suit for battery-powered applications
- Supports UART/GPIO data interfaces
- Supports Smart Link (APP provided)
- Firmware upgradable via wireless and remote, wireless batch configuration tool is also provided
- Supports WPS configuration
- Supports software power switch (reserved for the moment)
- SDK provided for secondary development
Specifications
| Type | Specification | Value |
|---|---|---|
| Wireless | Standard Certification | FCC/CE |
| Protocol | 802.11 b/g/n | |
| Frequency Range | 2.412GHz-2.484GHz | |
| TX Power | 802.11b: +16 +/-2dBm (@11Mbps) | |
| 802.11g: +14 +/-2dBm (@54Mbps) | ||
| 802.11n: +13 +/-2dBm (@HT20, MCS7) | ||
| RX Sensitivity | 802.11b: -93 dBm (@11Mbps ,CCK) | |
| 802.11g: -85dBm (@54Mbps, OFDM) | ||
| 802.11n: -82dBm (@HT20, MCS7) | ||
| Antenna | Embedded : PCB antenna | |
| External : I-PEX connector | ||
| Hardware | Standard Certification | RoHS compliant |
| Data Interface | UART | |
| PWM, GPIO, SPI (reserved) | ||
| Voltage Level | 2.8~3.6V | |
| Operating Current | Emitting : peak ~200mA | |
| Normal : avg ~12mA, peak 200mA | ||
| Standby : <200uA (reserved for the moment) | ||
| Software power off : <10uA (reserved for the moment) | ||
| Operating Temp. | -40℃- 85℃ | |
| Storage Temp. | -45℃- 125℃ | |
| Dimension | 23.1mm x 32.8mm x 2.7mm | |
| Software | Wireless Network Type | STA/AP/STA+AP |
| Security Algorithm | WEP/WPA-PSK/WPA2-PSK | |
| Encryption | WEP64/WEP128/TKIP/AES | |
| Firmware Upgrading | Web | |
| Customization | Supports user customized web page | |
| SDK provided for secondary development | ||
| Network Protocol | IPv4, TCP/UDP/HTTP | |
| Configuration | AT+instructions set, Web page | |
| Android/iOS terminal, Smart Link APP |
Downloads
Wiki: www.waveshare.com/wiki/WIFI-LPB100-B
WARNING
