12VDC Single Channel Remote Control Relay Switch
Controlled by a tiny microporcessor, this product can be applied to garage door control, lighting control, remotely controlled curtains, access control system and various motor control systems etc.. It is tiny and easy to use.
Button transmitter is included.
Features:
Working voltage: DC12V
Static working current: ≤10mA
Working temperature: -40°C to +80°C
Receive sensitivity: ≥-95dB
Working frequency: 433.92MHZ
Output current: ≤10A
Working mode: Jog, self-locking, interlocking, delay (adjustable)
Output mode: Contact output (controllable AC, DC)
Modes:
1. Jog mode(Default working mode): press the remote control relay to pull in, release the remote control relay to disconnect
2. Self-locking mode(Default working mode): press the remote control relay to pull in, press again the remote control to disconnect
How to program it:
1. Jog learning method:
Press the control board code button once, the LED indicator flashes once, then press the remote control button that needs to be coded. The LED of the control panel flashes several times continuously, indicating that the code is successful.
2. Self-locking learning method:
Press the control board code button twice in succession, the LED indicator flashes twice, when the LED indicator goes out, then press the remote control button that needs to be coded. The LED of the control panel flashes several times continuously, indicating that the code is successful.
Clearing code method:
Keep pressing the learning button for about 8 seconds, the indicator flashes several times and then goes off, indicating that the clearing is successful.
WARNING
