HC-08, 3.6V - 6V Bluetooth Module - Slave mode BLE 4.0
Add Bluetooth connectivity to your project! Operates from 3.6v to 6v, which means you can use interface this simple device to any micro controllers. The added simplicity of the six pre-soldered connectors results in a very easy n' quick plug and play for any future projects. This device can work up to 10 meters, the voltage supplied must not exceed 6v and it is not reverse polarity protected. Use this device for any project you may have in mind and rest assure with this Bluetooth based device will consume less power than a traditional WIFI Module! No Firmware = No Fuss, logic Levels of RX & TX are 3.3V.
PLEASE NOTE:
You need to have an Android OS of 4.3 or higher for the module to work.
This module only supports Bluetooth 4.0 BLE mode. It is not compatible with any older Bluetooth 2.0 devices
Specifications:
- Led indicate Bluetooth connection status; flashing: Bluetooth connectivity, lit: the Bluetooth connection
- 3.3 – 6DC input voltage.
- Capable of working within a distance of 10 meters, over 10 meters is possible but connection will be weak and inconsistent.
- Dimensions: 35x15 mm
Tutorials:
https://www.youtube.com/watch?v=0KujF1mi5B0
http://www.instructables.com/id/Use-Bluetooth-40-HC-08-Module-to-Control-Addressab/
WARNING
