Our Brands

Wireless

7 - 21
15 16 17 18 19 20 21 22 23 24 25 26
Newest Items First
15 Per Page
WRL-13002 Telescopic Antenna SMA - 75 MHz to 1 GHz (ANT500)
US$75.76
This ANT500 is a telescopic antenna designed for operation from 75 MHz to 1 GHz with a total length that is configurable from 20 cm to 88 cm long. Each ANT500 is constructed of stainless steel and features an SMA male connector, rotating shaft, and adjustable elbow.
Delivery within 2-3 weeks
+ −
Add to wish list
WRL-13001 HackRF One
US$570.93
This is the HackRF One, a Software Defined Radio (SDR) peripheral capable of transmission or reception of radio signals from 1MHz to 6GHz. Designed to enable test and development of modern and next generation radio technologies, HackRF One is an open source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation.
Delivery within 2-3 weeks
+ −
Add to wish list
1096-ADA Simple RF M4 Receiver - 315MHz Momentary Type
US$7.62
These Simple RF receivers are the easiest way possible to add wireless control, painlessly! There's no programming, configuring or addressing - simply power the receiver with 5-10VDC and press the buttons on our matching RF keyfob remote. When the A button is pressed, it activates the first pin, when the B button is pressed, it activates the second one, and so forth for all four buttons. There's no microcontroller required, its just a simple one-to-one link.
In stock
+ −
Add to wish list
1095-ADA Keyfob 4-Button RF Remote Control - 315MHz
US$12.17
This 4-button keyfob remote goes with our three basic 315MHz RF receiver modules. It will work with all of them, sending out one of four commands that match up with the four outputs. Its small and light weight and will work up to 25 feet away depending on line-of-sight and obstructions. Since this is just a transmitter, if you have multiple receivers, it will turn all of them on and off at the same time (there is no sub-addressing).
In stock
+ −
Add to wish list
VK2828U7G5LF TTL Ublox GPS module with antenna
US$23.79
This board is embedding GPS module and antenna in a small foot-print module. You can wire it ton an Arduino or Raspberry Pi to retrieve geographic coordinates (latitude and longitude, altitude), speed, heading and GMT time. Just plug it in and USB to Serial Adapter, open a Serial Monitor, and it’ll start sending coordinates to the computer!
In stock
+ −
Add to wish list
MOD-AMP Bluetooth 4.0 Audio Digital 25W + 25W Amplifier Based on TDA7492P
US$31.80
This device is a simple audio amplifier that is based on the TDA7492P IC and uses high quality surface mount components. Plug in anywhere from 8 to 25 volts in the DC Jack, use your android, Iphone or Computer to pair with this device like any other Bluetooth device and play music anywhere within 20 meters! No software downloading or uploading required. Connect the left and right speaker to the green terminal blocks and enjoy high quality audio from this credit card size device.
In stock
+ −
Add to wish list
WL-310 433 MHz Wireless Transmitter and Receiver Module (One Way Communication)
US$6.99
This unit contains a single IC chip with three pins as the transmitter and a single four pin IC for the receiver. Plug the transmitter to a microcontroller and the receiver to another, send long distance code or commands. This unit can send information through walls with a range of less than 200m. You are required to use a small 22 – 24 AWG cable and insert the stripped cable into the through-hole labelled ant to increase the range.
In stock
+ −
Add to wish list
WL-200 NRF24L01 2.4Ghz transceiver module with antenna
US$6.99
Small generic transceiver module in the 2.4Ghz range with low power consumption, GFSK modulation and on-board antenna, in a small package communicating over serial. This module is useful for transmitting and receiving data for microcontroller based projects. 
In stock
+ −
Add to wish list
WL-300 315MHz Wireless Transmitter Module and Receiver Module (One way Communication)
US$10.36
This unit contains a single IC chip with three pins as the transmitter and a single four pin IC for receiver. Plug one end to a microcontroller and the other to another, send long distance code or commands. This unit can send information through walls with a range of less than 200m.
In stock
+ −
Add to wish list
WAVE-114 Bluetooth 4.0 Motherboard
US$13.99

BLE400 Features: Onboard battery holder, multi power supplies are available. All the IOs are accessible for easy expansion. Integrates CP2102 for debugging. LEDs and user keys, compatible with other official boards, easy to use.

In stock
+ −
Add to wish list
EF02012 XBee Shield with Logic Level Converter SHD08
US$12.53
Features: With Logic Level Converter (3.3V to 5V or 1.8V to 5V or 1.8V to 3.3V). With CC1101 module connecter. Provide maximal 800mA under 3.3V. 4 indicator LED ( RSSI, ASS, Din, Dout) for XBee. Switchable of communication with FTDI-USB /Base board. Full 2.54mm break out for XBee. With wireless program hardware interfaces. Reset button for base board. Stackable interfaces.
In stock
+ −
Add to wish list
ARD-HM-11 Bluetooth 4.0 Board
US$17.05
This device is great for surface mount projects that require Bluetooth connectivity or by creating your own expansion board to install in your projects using pin headers. Support serial communication, ultra-low standby power consumption and is packed in a small package.
In stock
+ −
Add to wish list
ARD-HM-10 Bluetooth 4.0 Board with Logic Level Translator
US$22.75
This Bluetooth device is the HM-10 Module that is rated for Bluetooth 4.0, it comes with a logic level converter so you can plug your Arduino Uno to this device, but you need a USB to TTL Converter to do so! The device comes heatsinked in transparent heat shrink to protect the device from ESD.
In stock
+ −
Add to wish list
BT-DONGLE USB Bluetooth V4.0 Mini Dongle Adapter
US$13.93
This device adds Bluetooth connectivity to your RPi, Laptop, Desktop or any other related project that has a USB port. A simple plug and play device that was tested for windows 10.
In stock
+ −
Add to wish list
HC-06, 3.6V - 6V Bluetooth Module - Slave mode only
US$13.93
Add Bluetooth connectivity to your project! Operates from 3.6v to 6v, which means you can use interface this simple device to any micro controllers.  The added simplicity of the four pre-soldered connectors results in a very easy n' quick plug and play for any future projects.
In stock
+ −
Add to wish list
7 - 21
15 16 17 18 19 20 21 22 23 24 25 26