PSM-138 PWM 12V - 36V DC Motor Speed Controller 10A Pulse Drive Board with Forward Reverse And Adjust Speed Switch for Motor Controller
SPECIFICATIONS
1. Input voltage: DC12V - 36V
2. Rated current: 10A
If the controller is used for a long time, it is recommended to select the current of the motor within 5A, pay particular
attention to the cooling of the module.
3. Maximum power: 600W
4. Speed regulation: PWM adjustment
5. Speed adjustment range: 0-100%
6. Control frequency: 25KHZ
7. Direction control: Clockwise or counterclockwise rotation
8. Module size: 92MM*52MM*36MM
9. The center distance of the mounting hole on the back is 104MM
10. Potentiometer installation opening: 7MM
11. Special reminder: DC brush motor governor can only be connected to DC power supply, cannot be connected to AC power
source, otherwise it will burn out.
12. Note that this is not a power module. It must be connected to the motor to adjust speed. |
There is no change in the output of the multimeter without the motor.
13. This governor is used for DC brush motor, not suitable for DC brushless motor speed regulation;
This controller cannot be used as a voltage regulator.
14. Note:We recommend that the motor not suddenly change its direction of rotation when rotating at high speed
WARNING
