Our Brands

Alignment Tools

ABRA distributes a wide array of alignment tools from major manufacturers such as GC Waldom.
Newest Items First
15 Per Page
8606-L Hex Aignment Tool
US$4.12
This plastic hex alignment tool can be used for aligning RF coils as well as adjusting potentiometers in high voltage power supplies. Has a 0.100 inch (2.45mm) hex tip as well as a 0.100 inch (2.45mm) flat screwdriver tip on opposite ends. Tips are undercut to reach the bottom lug of coils without turning the top. Material: Delrin. Length: 11 inch (27.94cm). Adjustment Dimensions: 0.1in. (2.54mm) hex and 0.1 (2.54mm) flat screwdriver.
In stock
+ −
Add to wish list
900-154 Eclipse 1/2" Conduit Bender
900-154 Eclipse 1/2" Conduit Bender
US$69.99
This is a 1/2" conduit bender tool for bending metal and aluminum by using the marked angles of this die cast aluminum design.
In stock
+ −
Add to wish list
902-073 Tool Spring Hook Tool - 8 1/2"
US$9.73
This is the perfect tool for assembly of drive belts or assembly and disassembly of springs. On 1 end is the hook design for pulling. The opposite end is designed for pushing.
In stock
+ −
Add to wish list
12-4140 GC Tool 36 - 40 Pins Anti-Static Integrated Circuit Insertion Tool
12-4140 GC Tool 36 - 40 Pins Anti-Static Integrated Circuit Insertion Tool
US$23.30
This is an anti-static IC insertion tool for all popular DIP style integrated circuits. The narrow design permits insertion on crowded boards, as well the handle has pin straightener molded in for respective integrated circuit sizes.
In stock
+ −
Add to wish list
ICX-01 Integrated Circuit Pin Straightener
ICX-01 Integrated Circuit Pin Straightener
US$17.27
This is a spring loaded device quickly straightens bent integrated circuit pins for standard DIP style 6 pins to 28 pins and easy insert them into their sockets.
In stock
+ −
Add to wish list
12-4612 GC Tool 28-40 Pin Grounded DIP IC Extractor
12-4612 GC Tool 28-40 Pin Grounded DIP IC Extractor
US$41.64
This is a simple device by placing the tool on the socket and depressing the plunger, one has instant and accurate extraction. Conductive finish with gorund strap connection point. Will remove 28 to 40 pin integrated circuit.
In stock
+ −
Add to wish list
9293 Double-Ended Long Screwdriver
9293 Double-Ended Long Screwdriver
US$5.59
Material: Fibreglass Shaft: 5/32" (4mm) dia., 12" (30.5cm) long Ends: 1/32" thick screwdriver tip (both ends) Total Length: 12" (30.5cm).
In stock
+ −
Add to wish list
Double Sided Hex tool
Double Sided Hex tool
US$2.74
Material: Delrin Ends: ¼" long Hex, 0.096" dia. shaft; 3/8" long Hex, undercut (0.068" dia.) shaft to reach bottom slugs in coils Total Length: 5" (12.7cm).
In stock
+ −
Add to wish list
2520-Tool Duplex Alignment Screwdriver
2520-Tool Duplex Alignment Screwdriver
US$3.36
Material: Delrin Shaft: Long End 7/32" (5.5mm) dia., 1" (2.5cm) long Ends: 1/32" Thick Screwdriver Tip (Both Ends) Total Length: 7" (17.7cm).
Delivery within 2-3 weeks
+ −
Add to wish list
5000 Metal Tip Alignment Screwdriver
5000 Metal Tip Alignment Screwdriver
US$2.74
Material: Butyrate Shaft: 7/32" (5.5mm) dia., 5 1/8" (13cm). Long Ends: 1/8" (3.2mm) Wide Steel Tip; 3/4" Kurled Tip Total Length: 61/8" (15.5cm).
In stock
+ −
Add to wish list
8282 Hex-Screwdriver Combination
8282 Hex-Screwdriver Combination
US$2.94
Material: Delrin. Ends: Screwdriver (Plastic) 1/8" Blade; ¼" long Hex, undercut (0.095" dia.) shaft to reach bottom slugs in coils. Total Length: 5 7/16" (13.8cm).
In stock
+ −
Add to wish list
8606 Hex and Special Tip Tool
8606 Hex and Special Tip Tool
US$4.19
Material: Delrin Ends: Flat screwdriver tip (0.027" thick-95" wide), followed by 0.100" Hex, 7/32" long, Undercut shaft to reach bottom slugs in coils. Total Length: 5 3/32" (12.9cm).
In stock
+ −
Add to wish list
8608 Potentiometer Adjustment Tool
8608 Potentiometer Adjustment Tool
US$4.30
Material: Nylon Shaft: ¼" (6.3mm) dia. 4 15/16" (12.5cm) long Ends: 0.85" (2.2mm) wide steel tip; 0.85" (2.2mm) wide steel tip, recessed .040" Total Length: 4 15/16" (12.5cm).
In stock
+ −
Add to wish list