Our Brands

Thermal Management

1 2 3 4 5 6 7 8 9 10 11 12
Newest Items First
15 Per Page
HST55 Heatsink Dual TO-3 Stud Mount
US$18.15
This is a black radiator aluminum heatsink for dual TO-3 packages stud mount. 4” x 4” x 1-1/8” (L x W x H). 12cm x 12 cm x 2.6cm (L x W x H).
In stock
+ −
Add to wish list
FAN-6010 12V DC Cooling Fan 6010 – 2.39”sq. X 0.39“
US$5.59
This is a 12V rated computer cooling fan with 2-pin JST connector. The fan has a black case with holes for screw mounting. NOTE: This is a 2-wire fan and therefore does not have speed measuring.
In stock
+ −
Add to wish list
FAN-6020 12V DC Cooling Fan 6020 – 2.39”sq. X 0.79“
US$5.59
This is a 12V rated computer cooling fan with 2-pin JST connector. The fan has a black case with holes for screw mounting. NOTE: This is a 2-wire fan and therefore does not have speed measuring.
In stock
+ −
Add to wish list
HS-MK Heat Sink for Stepper Motors [40x40x11]
US$2.79
If you require additional cooling for your steppers motors, this product will do just that. It has a profile of 40x40x11 mm and is made out of zinc metal material. Excellent for CNC and 3D related projects that require passive cooling.
In stock
+ −
Add to wish list
HS-3DD15D 3DD15D Radiator Aluminum Heat Sink TO-3
US$1.25
This is a heavy duty aluminum radiator 15D3DD model heat sink for the TO-3 power transistor package.
In stock
+ −
Add to wish list
FAN-E3D E3D-V6 Fan & Duct Housing for Extruder
US$4.19
This is a special product that comes with a 12VDC 650mA fan that is 30x30mm mounted with two Philips screws onto a special mold inject plastic for latching onto any E3D-V6 heatsinks. It does come with a short JST plug.
In stock
+ −
Add to wish list
HS-PAD Thermal Conductive Silicon Pad-100 pieces
US$9.94
These pads are great for attaching heatsinks to chips. Simply slide the pad under the heat sink and it will stick. These pads completely avoid the mess of thermal heat compound and the hassle of screws. Specs: 100 pcs. 10mm x 10mm x 1mm.
In stock
+ −
Add to wish list
TEC1-12709 Thermoelectric Peltier Cooler Plate - 12VDC 8A 96W
US$12.31
Thermoelectric coolers (TEC) operate according to the Peltier effect. The effect creates a temperature difference by transferring heat between two electrical junctions. When the current flows through the junctions of the two conductors, heat is removed at one junction and cooling occurs at the other. Therefore TEC`s can be used for heating and cooling,depending on which side you use. Either side will heat up or cool down very quickly until it reaches equilibrium, so the heat needs to be managed with a fan or heatsink to keep the process going.
In stock
+ −
Add to wish list
5V Cooling Fan for Raspberry Pi 4
US$3.49
This fan is specifically designed for Raspberry Pi and can be mounted on some acrylic cases. The fan is useful for projects where heatsinks just aren't cutting it. Protect your hardware with a low power fan. The greatest feature of this fan is its low power consumption (20mA @ 5VDC). This fan attaches directly to the RPi GPIO and requires no additional power source or relay circuit.
In stock
+ −
Add to wish list
486-FAN 19" CPU Cooling Fan, 12VDC 0,13A Sleeve bearing & Heat Sink
US$11.13
Extend your CPU's life with this low profile and low noise cooling fan mounted on heatsink. Fan Size: 40mm x 40mm x 10mm. Air Flow: 10.5 CFM. Cooler Dimension: 45mm x 47mm. Fan Speed: 5,000 rpm. Noise Level: 1.89dBA.
In stock
+ −
Add to wish list
HS-320 Aluminum Heatsink 15 x 13 x 13 mm (LxWxH)
US$1.72
This heatsink is designed specifically for any TO package based IC. It an also be used for any chip that requires heat to be dissipated. This heatsink is composed of high grade aluminum and offers some decent thermal performance. Recommend to be used on LM, TIP, IRF and any other TO based Package IC. Highly recommend to use the PRT-09771 to help stick the heatsink to any chip without worrying about conductivity.
In stock
+ −
Add to wish list
HS-PI-C 3Pcs Aluminum + Copper Heatsink
US$3.00
This is a great product for passively cooling your RPI 3, this pack comes with two aluminum heatsinks for the CPU and 4x USB with Ethernet Controller IC. The copper plate is recommend on the backside for the ram. Each heatsink comes with thermal tape for easy mounting. Dimensions: Green Heatsink: 14 x 14 x 9 mm (LxWxH). Copper Heatsink: 5x9x9 mm (LxWxH). Black Heatsink: 12x12x1 mm (LxWxH).
In stock
+ −
Add to wish list
3368-ADA Miniature 5V Cooling Fan for Raspberry Pi (and Other Computers)
US$6.13
Hook up this 5V Mini Cooling Fan and prevent your hard-working Pi from overheating! Of course, it's also great for use with any small computer or FPGA or motor driver or anything that needs cooling. Plug the fan directly into your Raspberry Pi's 5V+GND GPIO power pins, as shown, for instant cooling! Place in your case, or even better, on top of your Pi's CPU to give it extra air-flow. Compatible with any and all Raspberry Pi computers but only the Pi 3 runs hot enough to benefit from any cooling, when doing intense computations.
Delivery within 2-3 weeks
+ −
Add to wish list
FAN-3D-G Fan Grill Guard (40mm x 40mm)
US$1.39
This stainless steel fan guard is for protection on the fan part: FAN-3D. This type of fan and fan guard are common in 3D printers. The grill screws in easily at the four corners (Screws are not included).
In stock
+ −
Add to wish list
FAN-3D Fan Brushless 12VDC for 3D Printer (40mm x 40mm x 10mm)
US$3.49
This brushless fan is primarily used for installation in a 3D printer. The fan serves to cool down the motors and filament during lengthy prints. The fan is easily connected via a 2 pin JST connector.
Delivery within 2-3 weeks
+ −
Add to wish list
1 2 3 4 5 6 7 8 9 10 11 12