Our Brands

Fans

1 2
Oldest Items First
32 Per Page
FAN-110 115VAC Cooling Fan - 3.14" sq. X 1"
FAN-110 115VAC Cooling Fan - 3.14" sq. X 1"
US$27.25
The Fan-110 is a 115 volt AC cooling fan.    Order#         Dimensions             FAN-110  3.14"sq. x 1"...
In stock
+ −
Add to wish list
FAN-310 24VDC Fan - 3.14" sq. X 1"
FAN-310 24VDC Sleeve Fan 2700 RPM, 37CFM - 3.14" sq. X 1"
US$11.78
The Fan-310 is a 24 volt DC cooling fan. Specifications: Dimensions: 80 x 80 x 25mm (3.14 x 3.14 x 1") Mounting Center: 71.5mm (2.82") Rating:...
In stock
+ −
Add to wish list
FAN-910C Fan Cord for Cooling Fans
FAN-910C Fan Cord for Cooling Fans
US$0.99

Fan Cord fits all terminal fans.

In stock
+ −
Add to wish list
FAN-810GP 80mm (3.14") Plastic Fan Guard
FAN-810GP 80mm (3.14") Plastic Fan Guard
US$0.99
This is a plastic fan guard that fits all 80mm (3.14") fans.
In stock
+ −
Add to wish list
FAN-815G 92mm (3.62") Square Metal Fan Guard
FAN-815G 92mm (3.62") Square Metal Fan Guard
US$0.99
This is a fan guard that fits all 92mm (3.62") fans.
In stock
+ −
Add to wish list
FAN-820G 120mm (4.72") Square Metal Fan Guard
FAN-820G 120mm (4.72") Square Metal Fan Guard
US$2.79
This is a fan guard that fits all 120mm (4.72") fans.
In stock
+ −
Add to wish list
FAN-810G 80mm (3.14") Square Metal Fan Guard
FAN-810G 80mm (3.14") Square Metal Fan Guard
US$1.67
This is a fan guard that fits all 80mm (3.14") fans.
In stock
+ −
Add to wish list
Fan-Blower 12VDC 16CFM Fan
Fan-Blower 12VDC 16CFM Fan
US$8.33

Features: Rated Voltage: 6-12VDC. Rated Current: 1Amp. Rated Airflow: 16CFM. Rated Power: 10W. Outlet Diameter: 33mm. Fan Speed: 3000-3500rpm.

In stock
+ −
Add to wish list
FAN-120 115VAC Cooling Fan - 3.14" sq. X 1.5"
FAN-120 115VAC Cooling Fan - 3.14" sq. X 1.5"
US$18.98
The Fan-120 is a 115 volt AC cooling fan.  Order#         Dimensions             FAN-110  3.14"sq. x 1"...
In stock
+ −
Add to wish list
FAN-140-67CFM 115VAC Cooling Fan - 4.71" sq. X 1.5"
US$13.60
The FAN-140-67CFM is a 115 volt AC cooling fan. Detailed Specifications Expected Life: *Failure rate 10% 25deg.C 100,000 hours Nominal Voltage:...
In stock
+ −
Add to wish list
FAN-250 12V DC Cooling Fan - 4.71" sq. X 1.5"*
FAN-250 12V DC Cooling Fan - 4.71" sq. X 1.5"*
US$18.15
The Fan-250 is a 12 volt DC cooling fan with a rating of 140CFM. Specifications: Ball Bearing Rated Current: 0.55A (6.6W) Rated speed: 2800RPM Airflow...
In stock
+ −
Add to wish list
FAN-225 12V DC Cooling Fan - 3.63" sq. X 1"
FAN-225 12V DC Cooling Fan - 3.63" sq. X 1"
US$9.98
The Fan-225 is a 12 volt DC cooling fan.    Order#        Dimensions         FAN-200  1.55"sq. x 3/4"...
In stock
+ −
Add to wish list
FAN-220 12V DC Cooling Fan - 3.14" sq. X 1.5"
FAN-220 12V DC Cooling Fan - 3.14" sq. X 1.5"
US$9.98
The Fan-220 is a 12 volt DC cooling fan.    Order#        Dimensions         FAN-200  1.55"sq. x 3/4"...
Delivery within 2-3 weeks
+ −
Add to wish list
FAN-210 12V DC Cooling Fan - 3.14" sq. X 1"
FAN-210 12V DC Cooling Fan - 3.14" sq. X 1"
US$9.98
The Fan-210 is a 12 volt DC cooling fan.    Order#        Dimensions         FAN-200  1.55"sq. x 3/4"...
In stock
+ −
Add to wish list
FAN-420 220VAC Cooling Fan - 4.71" sq. X 1.5"
FAN-420 220VAC Cooling Fan - 4.71" sq. X 1.5"
US$14.99
The Fan-420 is a 220 volt AC cooling fan.  Order#         Dimensions             FAN-410  3.14"sq. x 1.5"...
Delivery within 2-3 weeks
+ −
Add to wish list
FAN-410 220VAC Cooling Fan - 3.14" sq. X 1.5"
FAN-410 220VAC Cooling Fan - 3.14" sq. X 1.5"
US$27.25
The Fan-410 is a 220 volt AC cooling fan. Specifications: Current: 0.07/0.06 Amps Power: 14/12 W Frequency: 50/60Hz Bearing: Ball...
In stock
+ −
Add to wish list
FAN-805G 60mm (2.36") Square Metal Fan Guard
FAN-805G 60mm (2.36") Square Metal Fan Guard
US$1.39
This is a fan guard that fits all 60mm (2.36") fans.
In stock
+ −
Add to wish list
FAN-825G 127mm (5.0") Square Metal Fan Guard
FAN-825G 127mm (5.0") Square Metal Fan Guard
US$3.21
This is a fan guard that fits all 127mm (5.0") fans.
Delivery within 2-3 weeks
+ −
Add to wish list
SP101A-1123HBT AC Cooling Fan - 120 x 120 x 38mm (Ball Bearing)
SP101A-1123HBT AC Cooling Fan - 120 x 120 x 38mm (Ball Bearing)
US$31.85

Features: Bearing Type: Ball. Rated Voltage: 115VAC. Current: 180mA. Power: 18 Watts. Air Flow: 107 CFM. Noise: 50 dBA. Size: 120 x 120 x 38mm. Connection: Terminals. Agency Approvals: UL/CUL/CE. 

Delivery within 2-3 weeks
+ −
Add to wish list
FAN-320 24VDC Fan - 4.71" sq. X 1"
FAN-320 24VDC Fan - 4.71" sq. X 1" , 0.23A
US$14.99
The Fan-320 is a 24 volt DC cooling fan.  Order#         Dimensions             FAN-320  4.71"sq. x 1"
In stock
+ −
Add to wish list
AD0412UB-C72GP Fan 12VDC 10.6 CFM 40x40x20 mm Ball Bearing 3-12" Leads Locked Rotor
US$12.53
AD0412UB-C72GP Fan 12VDC 10.6 CFM 40x40x20 mm Ball Bearing 3-12" Leads Locked Rotor   Specification Value Voltage (VDC) 12...
In stock
+ −
Add to wish list
FAN-3D Fan Brushless 12VDC for 3D Printer (40mm x 40mm x 10mm)
US$3.49
This brushless fan is primarily used for installation in a 3D printer. The fan serves to cool down the motors and filament during lengthy prints. The fan is easily connected via a 2 pin JST connector.
In stock
+ −
Add to wish list
FAN-3D-G Fan Grill Guard (40mm x 40mm)
US$1.39
This stainless steel fan guard is for protection on the fan part: FAN-3D. This type of fan and fan guard are common in 3D printers. The grill screws in easily at the four corners (Screws are not included).
In stock
+ −
Add to wish list
3368-ADA Miniature 5V Cooling Fan for Raspberry Pi (and Other Computers)
US$6.13
Hook up this 5V Mini Cooling Fan and prevent your hard-working Pi from overheating! Of course, it's also great for use with any small computer or FPGA or motor driver or anything that needs cooling. Plug the fan directly into your Raspberry Pi's 5V+GND GPIO power pins, as shown, for instant cooling! Place in your case, or even better, on top of your Pi's CPU to give it extra air-flow. Compatible with any and all Raspberry Pi computers but only the Pi 3 runs hot enough to benefit from any cooling, when doing intense computations.
In stock
+ −
Add to wish list
486-FAN 19" CPU Cooling Fan, 12VDC 0,13A Sleeve bearing & Heat Sink
US$11.13
Extend your CPU's life with this low profile and low noise cooling fan mounted on heatsink. Fan Size: 40mm x 40mm x 10mm. Air Flow: 10.5 CFM. Cooler Dimension: 45mm x 47mm. Fan Speed: 5,000 rpm. Noise Level: 1.89dBA.
In stock
+ −
Add to wish list
5V Cooling Fan for Raspberry Pi 4
US$3.49
This fan is specifically designed for Raspberry Pi and can be mounted on some acrylic cases. The fan is useful for projects where heatsinks just aren't cutting it. Protect your hardware with a low power fan. The greatest feature of this fan is its low power consumption (20mA @ 5VDC). This fan attaches directly to the RPi GPIO and requires no additional power source or relay circuit.
In stock
+ −
Add to wish list
FAN-E3D E3D-V6 Fan & Duct Housing for Extruder
US$4.19
This is a special product that comes with a 12VDC 650mA fan that is 30x30mm mounted with two Philips screws onto a special mold inject plastic for latching onto any E3D-V6 heatsinks. It does come with a short JST plug.
In stock
+ −
Add to wish list
FAN-6020 12V DC Cooling Fan 6020 – 2.39”sq. X 0.79“
US$5.59
This is a 12V rated computer cooling fan with 2-pin JST connector. The fan has a black case with holes for screw mounting. NOTE: This is a 2-wire fan and therefore does not have speed measuring.
In stock
+ −
Add to wish list
FAN-6010 12V DC Cooling Fan 6010 – 2.39”sq. X 0.39“
US$5.59
This is a 12V rated computer cooling fan with 2-pin JST connector. The fan has a black case with holes for screw mounting. NOTE: This is a 2-wire fan and therefore does not have speed measuring.
In stock
+ −
Add to wish list
FAN-6015 12VDC 200mA Generic Fan with 2 Pin JST connector – 6x6x1.5cm
US$4.19
This product is a generic DC fan that operates at 12VDC, it will consume 200mA to run at nominal speeds. This fan is recommend for a any component that requires ventilation and will mount on any mounting hole that is 5x5cm apart. You can mount this product using a generic M3 or M4 screw. This fan has a JST pin for power and measures 6x6x1.5cm.
Delivery within 2-3 weeks
+ −
Add to wish list
FAN-9025 12 VDC Cooling Fan – 9.2 x 9.2 x 2.4cm
US$4.19
This is a 12VDC rated computer cooling fan with 2-pin JST connector. The fan has a black case with holes for screw mounting that are 8.3 x 8.3 apart and can fit M5 screws or smaller. NOTE: This is a 2-wire fan and therefore does not have the ability to measure speed.
In stock
+ −
Add to wish list
FAN-3D-002 12VDC 0.15A Blower Fan (Part Cooling Fan for 3D printers)
US$5.59
This is a special type of fan that can be found in 3D printers. Commonly referred as the vortex fan, this fan is excellent for cooling your parts as the nozzle of your printer lays the molten plastic (especially when using PLA material).
In stock
+ −
Add to wish list
1 2