The Instek SPS-2415 is a single output, 360W, switching DC power supply. OVP protects the SPS-2415 and its load from unexpected conditions.
High regulation is maintained at 0.01%. Remote sensing adds extra level of precision by compensating cable losses between loads. Turning the output On/Off from external device is available through remote control terminals. The SPS-2415 is an ideal solution for power-efficient bench-top or portable applications requiring high regulation.
Features:
- Two Digital Panel Meters
- 0.01 % High Regulation
- Constant Voltage and Constant Current Operation
- High Efficiency
- High Power Density
- Over Voltage, Overload and Reverse Polarity Protection
- Remote Output ON/OFF Control
| OUTPUT | |||||
|
|
SPS-1230
|
SPS-1820
|
SPS-2415
|
SPS-3610
|
SPS-606
|
|
Voltage
|
0~12V
|
0~18V
|
0~24V
|
0~36V
|
0~60V
|
|
Current
|
0~30A
|
0~20A
|
0~15A
|
0~10A
|
0~6A
|
| CONSTANT VOLTAGE OPERATION | |||||
| Line Regulation | < 5mV | ||||
| Load Regulation | < 5mV | ||||
| Ripple & Noise | < 5mVrms, 100mVp-p 20Hz ~ 20MHz | ||||
| Recovery Time | < 500μS ( 50% Load change, Minimum load 0.5A ) | ||||
| Temp. Coefficient | < 100 ppm/°C | ||||
| Output Range | 0 to rating voltage continuously adjustable | ||||
| CONSTANT CURRENT OPERATION | |||||
| Line Regulation | < 3mA | ||||
| Load Regulation | < 3mA | ||||
| Ripple Current | < 3mArms (SPS-606) < 5mArms (SPS-3610) < 10mArms (SPS-2415) < 10mArms (SPS-1820) < 30mArms (SPS-1230) |
||||
| Output Range | 0 to rating current continuously adjustable (Hi/Lo range switchable) | ||||
| METER | |||||
| Type | 3 1/2 Digit 0.39 LED Display | ||||
| Accuracy | ±( 0.5% of rdg + 2 digits ) | ||||
| INSULATION | |||||
| Chassis and Terminal | 20MΩ or above (DC 500V) | ||||
| Chassis and AC Cord | 30MΩ or above (DC 500V) | ||||
| POWER SOURCE | |||||
| AC 115V/230V ±15%, 50/60Hz | |||||
| DIMENSIONS & WEIGHT | |||||
| 128(W) x 145(H) x 285(D)mm Approx. 3.2kg |
|||||
WARNING
