Generic Low Cost

1 2 3
US$1.77
Black Binding Post 20A, for 4mm. Banana Plug,
In stock
+
Add to wish list

US$1.77
Green Binding Post 20A, for 4mm. Banana Plug,
In stock
+
Add to wish list

US$1.77
YellowBinding Post 20A, for 4mm. Banana Plug,
In stock
+
Add to wish list

US$1.77
Blue Binding Post 20A, for 4mm. Banana Plug,
In stock
+
Add to wish list

US$2.68
Binding Post 30A with red Color Indicator, for 4mm. Banana Plug.
In stock
+
Add to wish list

US$2.68
Binding Post 30A with green Color Indicator, for 4mm. Banana Plug.
In stock
+
Add to wish list

US$2.68
Binding Post 30A with Black Color Indicator, for 4mm. Banana Plug.
In stock
+
Add to wish list

US$2.68
Binding Post 30A with yellow Color Indicator, for 4mm. Banana Plug.
In stock
+
Add to wish list

US$2.68
Binding Post 30A with Blue Color Indicator, for 4mm. Banana Plug.
In stock
+
Add to wish list

US$1.32
Banana Jack yellow 4mm. with Metal Thread, Tab 0.187”
In stock
+
Add to wish list

US$1.32
Banana Jack bleu 4mm. with Metal Thread, Tab 0.187”
In stock
+
Add to wish list

US$1.32
Banana Jack green 4mm. with Metal Thread, Tab 0.187”
In stock
+
Add to wish list

US$1.32
Banana Jack Black 4mm. with Metal Thread, Tab 0.187”
In stock
+
Add to wish list

US$1.32
Banana Jack Red 4mm. with Metal Thread, Tab 0.187”
In stock
+
Add to wish list

US$3.14

This is a 90mm. gray plastic LCR Kelvin alligator test clip used to measure impedance and low resistance.

In stock
+
Add to wish list

US$3.14

This is a 90mm. black plastic LCR Kelvin alligator test clip used to measure impedance and low resistance.

In stock
+
Add to wish list

US$3.14

This is a 90mm. red plastic LCR Kelvin alligator test clip used to measure impedance and low resistance.

In stock
+
Add to wish list

US$1.77

This is a 25mm. black plastic LCR Kelvin alligator test clip used to measure impedance and low resistance.

In stock
+
Add to wish list

US$1.77

This is a 25mm. gray plastic LCR Kelvin alligator test clip used to measure impedance and low resistance.

In stock
+
Add to wish list

US$1.77

This is a 25mm. red plastic LCR Kelvin alligator test clip used to measure impedance and low resistance.

In stock
+
Add to wish list

US$3.59
This is a standard U-type to crocodile tips. Its length is about 18.5'' (467mm) end to end and the U opening is 1/4''(6.35mm) across. Useful for passing current/voltage. It comes as a set, one red and one black cable. Perfect for power supplies.
In stock
+
Add to wish list

US$3.35
U-type to banana plug copper cable capable of passing current and voltage efficiently.
In stock
+
Add to wish list

US$2.17
U-type copper cable capable of passing current and voltage efficiently.
In stock
+
Add to wish list

US$3.35
U-type copper cable capable of passing current and voltage efficiently.
In stock
+
Add to wish list

US$18.15
This device is a 120 centimeter P1204 est lead set for oscilloscope with male BNC plug to 4mm stacking banana plugs.
In stock
+
Add to wish list

US$9.78
This is a 120cm long BNC male to 4mm Banana plug test lead which is perfect for working with instruments with BNC interface such as oscilloscopes, signal generators, video surveillances.
In stock
+
Add to wish list

US$11.78
Multimeter Probe Kit TP1500
In stock
+
Add to wish list

US$52.73

This is a P-1300 multifunction multimeter test lead kit which provides 4 mm banana plugs, probes with replaceable needles and protective caps, small alligator clips, IC test hooks, spade terminals, large alligator clips and flexible test hooks. hooks.

In stock
+
Add to wish list

US$39.99

This is a P-1300 multifunction multimeter test lead kit which provides 4 mm banana plugs, probes with replaceable needles and protective caps, alligator clips, IC test hooks, spade terminals,and large alligator clips.

In stock
+
Add to wish list

US$30.89

This is a P-1300 multifunction multimeter test lead kit which provides 4 mm banana plugs, probes with replaceable needles and protective caps, alligator clips AND  and IC test hooks.

In stock
+
Add to wish list

US$21.79

This is a P-1300 multifunction multimeter test lead kit which provides 4 mm banana plugs, probes with replaceable needles and protective caps, alligator clips.

In stock
+
Add to wish list

US$15.42
This is a P-1300 multifunction multimeter test lead kit which provides 4 mm banana plugs, probes with replaceable needles and protective caps.
Delivery within 2-3 weeks
+
Add to wish list

US$31.80
This is an alligator to 4mm banana plug test lead set kit used for probes on harnesses, sensors, etc.
In stock
+
Add to wish list

US$7.23
Pair of 15A Red and Black Alligator Clips This pair of alligator clips can take up to 15A and can be used for small lead acid battery jumper cables. The...
In stock
+
Add to wish list

US$31.80
The TL-P1503E is an ensemble of 4mm. banana plug multimeter probes test leads 4mm. rated at 1000V, CATIII, 20A.
In stock
+
Add to wish list

US$26.34
The TL-P1503D is an ensemble of 4mm. banana plug multimeter probes test leads 4mm. rated at 1000V, CATIII, 20A.
In stock
+
Add to wish list

US$16.33
The TL-P1503B is an ensemble of 4mm. banana plug multimeter probes test leads 4mm. rated at 1000V, CATIII, 20A.
In stock
+
Add to wish list

US$10.87
The TL-P1503 is an ensemble of 4mm. banana plug multimeter probes test leads 4mm. rated at 1000V, CATIII, 20A.
In stock
+
Add to wish list

US$1.77
55mm Alligator Clip + 4mm Banana Plug Test Probe
In stock
+
Add to wish list

US$1.77
55mm Alligator Clip + 4mm Banana Plug Test Probe
In stock
+
Add to wish list

US$1.77
Blue 55mm Alligator Clip + 4mm Banana Plug Test Probe Available colors: RED,BLACK, GREEN, BLUE, YELLOW.   Sold per unit.
In stock
+
Add to wish list

US$1.77
55mm Alligator Clip + 4mm Banana Plug Test Probe
In stock
+
Add to wish list

US$1.77
55mm Alligator Clip + 4mm Banana Plug Test Probe
In stock
+
Add to wish list

US$0.63
Banana Jack Blue, 4mm. Panel Mount, Solder Tab. Overall length: 29.55mm Tab: 8.02 x 5.3mm Mounting hole: 7.38mm Threaded portion length: 17.15mm...
In stock
+
Add to wish list

US$0.63
Banana Jack Red, 4mm. Panel Mount, Solder Tab. Overall length: 29.55mm Tab: 8.02 x 5.3mm Mounting hole: 7.38mm Threaded portion length: 17.15mm...
In stock
+
Add to wish list

US$0.63
Banana Jack Black, 4mm. Panel Mount, Solder Tab. Overall length: 29.55mm Tab: 8.02 x 5.3mm Mounting hole: 7.38mm Threaded portion length: 17.15mm...
In stock
+
Add to wish list

US$9.98
This test clip can be used to perform tests or reprogram EEPROM chips without desoldering them from the PCB.
It only supports SOIC8 or SOP8 EEPROM packages such as 93Cxx, 25Cxx and 24Cxx series.
In stock
+
Add to wish list

US$7.23
These Alligator Clip to DuPont connector can be found in laboratories at schools, professional electrical companies or even at a hobbyist's garage. They are handy in situations where one needs to test certain circuits or electronic boards.
In stock
+
Add to wish list

US$7.23
These Banana Plug to Alligator Clip Test Lead cable can be found in laboratories at schools, professional electrical companies or even at a hobbyist's garage. They are handy in situations where one needs to test certain circuits or electronic boards.
In stock
+
Add to wish list

US$3.47
This is a 220mm long green wire with 4mm fork connectors on both ends. It is rated at 2A.  Colour may vary.
In stock
+
Add to wish list

US$5.00
They are machined from brass with a moveable multi-lam contact cage spring for tight fit. The connectors are nickel plated.  Wire:18AWG. Voltage: 50V Hands On. 600V Hands Free. Amps: 15. Sold individually.
In stock
+
Add to wish list

US$5.45
They are machined from brass with a moveable multi-lam contact cage spring for tight fit. The connectors are nickel plated. Wire:18AWG. Voltage: 50V Hands On. 600V Hands Free. Amps: 15. Sold individually.
In stock
+
Add to wish list

US$5.91
They are machined from brass with a moveable multi-lam contact cage spring for tight fit. The connectors are nickel plated.  . Wire:18AWG. Voltage: 50V Hands On. 600V Hands Free. Amps: 15. Sold individually.
In stock
+
Add to wish list

US$4.19
This USB male to alligator clip cable connects to a computer USB port and has the 5 volt and ground pins broken out to the alligator clips. This cable provides a convenient source of 5 volts for the DIY hobbyist.
In stock
+
Add to wish list

US$0.69
This device is a spring-loaded minigrabber clip for logic analyzer testing.
In stock
+
Add to wish list

US$0.69
This device is a spring-loaded minigrabber clip for logic analyzer testing.
In stock
+
Add to wish list

US$0.69
This device is a spring-loaded minigrabber clip for logic analyzer testing.
In stock
+
Add to wish list

US$0.69
This device is a spring-loaded minigrabber clip for logic analyzer testing.
In stock
+
Add to wish list

US$0.69
This device is a spring-loaded minigrabber clip for logic analyzer testing.
In stock
+
Add to wish list

US$5.59
This device is a set of 10 minigrabber hooks to female headers for logic analyzer testing. Total Length 34 cm.
In stock
+
Add to wish list

US$4.19
This USB female cable has the 5 volt and ground pins broken out to alligator clips. This cable provides a convenient source of 5 volts for the DIY hobbyist.
In stock
+
Add to wish list

US$4.98
This clip makes testing IC chips easy. This handy gadget allows you to test your IC’s without removing them or awkwardly probing them. Simply snap the clip onto any 8 pin SOP, SOIC or DIP package and connect jumper wires at the output. The clip is ideal for use with logic analyzers, oscilloscopes, multimeters and microcontrollers.
In stock
+
Add to wish list

US$0.66
High specification audio, connector & adapter: Plastic Banana Plugs with hole for interconnection.
Delivery within 2-3 weeks
+
Add to wish list

US$0.66
High specification audio, connector & adapter: Plastic Banana Plugs with hole for interconnection.
In stock
+
Add to wish list

US$0.69

These test clips have a spring loaded hook which tightly clips onto IC leads. Removable base allows direct wiring onto conductive hook.

In stock
+
Add to wish list

US$22.70
These rugged stackable banana plug to banana plug Test Leads are ABRA's bestsellers. Come in red, black, blue, green and white. They are machined from brass with a moveable multi-lam contact cage spring for tight fit. The connectors are nickel plated.
In stock
+
Add to wish list

US$18.15
These rugged stackable banana plug to banana plug Test Leads are ABRA's bestsellers. Come in red, black, blue, green and white. They are machined from brass with a moveable multi-lam contact cage spring for tight fit. The connectors are nickel plated.
In stock
+
Add to wish list

US$8.14
Each Alligator Clip with Pigtail cable has a wire length of 30cm (that’s a little less than 1ft) and a male pin that easily inserts into a standard 0.1" connector. Each pack consists of two red cables and two black cables.
In stock
+
Add to wish list

US$5.53
Each lead in this pack of ten is 50cm long with a rubber shrouded alligator clip on each end. There are five different colors, you get two each of: red, green, white, black and yellow.
In stock
+
Add to wish list

US$6.97
Sheathed Alligator Clips 32mm / 1 1/4, on both ends. Total Length 20. Pack of 10.
In stock
+
Add to wish list

US$6.97
Sheathed Alligator Clips 32mm / 1 1/4, on both ends. Total Length 20. Pack of 10.
In stock
+
Add to wish list

US$6.97
Perfect for all kinds of low voltage uses. , on both ends. Pack of 10 Leads. 2 each of Red, White, Green, Black and Yellow. Sheathed Alligator Clips: 1 Inch (27 mm). Wire Length: 18 Inches. Total Length: 20 Inches.
In stock
+
Add to wish list

US$6.32
2" long, plain, chrome plated, with excellent conductivity. 
In stock
+
Add to wish list

US$23.63
Flexible, 18 swg stranded wire cord with a stackable banana plug at one end and an alligator clip at the other end. Alligator clips has a protective vinyl sheath.
In stock
+
Add to wish list

US$3.64
Flexible, 18 swg stranded wire cord with a stackable banana plug at one end and an alligator clip at the other end. Alligator clips has a protective vinyl sheath.
In stock
+
Add to wish list

US$7.97
2" long, with insulated sleeve, chrome plated, with excellent conductivity.
In stock
+
Add to wish list

US$0.83
Plastic Banana Plugs with set screw connection and hole for interconnection. Color: blue. Length: 1.5". Screw connection for cables with a max. Ø of 0.06" sqt.
Delivery within 2-3 weeks
+
Add to wish list

US$0.97
Color: black. Length: 1.0". Drill hole: Ø 0.35". Panel thickness: max. 0.2".
In stock
+
Add to wish list

US$0.97
Color: blue. Length: 1.0". Drill hole: Ø 0.35". Panel thickness: max. 0.2".
Delivery within 2-3 weeks
+
Add to wish list

US$0.97
Color: green. Length: 1.0". Drill hole: Ø 0.35". Panel thickness: max. 0.2".
In stock
+
Add to wish list

US$0.97
Color: red. Length: 1.0". Drill hole: Ø 0.35". Panel thickness: max. 0.2".
In stock
+
Add to wish list

US$0.97
Color: yellow. Length: 1.0". Drill hole: Ø 0.35". Panel thickness: max. 0.2".
Delivery within 2-3 weeks
+
Add to wish list

US$7.62
Connect this to that without soldering using these handy mini alligator clip test leads. 5" overall cables with alligator clip on each end, color coded. You get 12 pieces in 6 colors. Strong and grippy, these always come in handy! We often use these in conjunction with a multimeter so we don't have to hold the probes in place.
In stock
+
Add to wish list

US$8.33

These SparkFun needle tipped multimeter probes are great for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. Dimensions: 36" Long.

In stock
+
Add to wish list

US$8.99
Contents: 2 x connection lead with stacking facility on both ends. Ratings: 30 V / 6 A. Ø plugs: 3/16". Length: 3.3 ft.
Delivery within 2-3 weeks
+
Add to wish list

US$3.42
A high quality molded 2.1mm DC barrel jack is brought out to red (center positive) & black (ring negative) alligator clips. Works with just about every wall adapter, good for about 2 or 3 Amps of current and up to 24VDC.
In stock
+
Add to wish list

US$3.42
A high quality molded 2.1mm DC barrel plug is brought out to red (center positive) & black (ring negative) alligator clips. 2.1mm is a near-standard for electronics, so with this adapter you can easy clip and connect packs and wires to a power jack. Good for about 2 or 3 Amps of current and up to 24VDC.
In stock
+
Add to wish list

US$0.31
Large Red Alligator Clip, 45mm. These are standard economy solder type alligator clips with insulator.
In stock
+
Add to wish list

US$0.29
Medium Black Alligator Clip, 35mm. These are standard economy solder type alligator clips with insulator.
In stock
+
Add to wish list

US$0.29

Medium Red Alligator Clip, 35mm. These are standard economy solder type alligator clips with insulator.

In stock
+
Add to wish list

US$0.28
Small Black Alligator Clip, 28mm. These are standard economy solder type alligator clips with insulator.
In stock
+
Add to wish list

US$0.28
Small Red Alligator Clip, 28mm. These are standard economy solder type alligator clips with insulator.
In stock
+
Add to wish list

US$1.43

These test clips have a spring loaded hook which tightly clips onto IC leads. Removable base allows direct wiring onto conductive hook.

In stock
+
Add to wish list

US$1.43
These test clips have a spring loaded hook which tightly clips onto IC leads. Removable base allows direct wiring onto conductive hook.
In stock
+
Add to wish list

US$1.19
These test clips have a spring loaded hook which tightly clips onto IC leads. Removable base allows direct wiring onto conductive hook.
In stock
+
Add to wish list

US$1.55
This is a pair of 16AWG red and black lead with insulated alligator clips on each end.
In stock
+
Add to wish list

US$10.74

Dip patented test clips for trouble shooting or development work. Rugged thermoplastic body with positive clamping action to eliminate intermittent connections.

In stock
+
Add to wish list

US$13.15

Dip patented test clips for trouble shooting or development work. Rugged thermoplastic body with positive clamping action to eliminate intermittent connections.

In stock
+
Add to wish list

US$17.93
Dip patented test clips for trouble shooting or development work. Rugged thermoplastic body with positive clamping action to eliminate intermittent...
In stock
+
Add to wish list

US$20.34

Dip patented test clips for trouble shooting or development work. Rugged thermoplastic body with positive clamping action to eliminate intermittent connections.

In stock
+
Add to wish list

US$6.92
Connect this to that without soldering using these handy mini alligator clip test leads. 15" cables with alligator clip on each end, color coded. You get 12 pieces in 6 colors. Strong and grippy, these always come in handy!
In stock
+
Add to wish list

US$8.67
Connect this to that without soldering using these handy alligator clip test leads. 20" cables with alligator clip on each end, color coded. You get 10 pieces in 5 colors. Strong and grippy, these always come in handy!
Delivery within 2-3 weeks
+
Add to wish list

US$0.70
A staple for the electrical engineer. I can't tell you how many times I've been one clip short! Sold in single units.
In stock
+
Add to wish list

US$0.78

Yellow Female Banana Socket.

In stock
+
Add to wish list

US$0.78
Green Female Banana Socket.
In stock
+
Add to wish list

US$0.48
This is a red alligator clip with a screw for wire connection.
In stock
+
Add to wish list

US$0.48
This is a black alligator clip with a screw for wire connection.
In stock
+
Add to wish list

US$6.93
This is an interface cable for the Bus Pirate, designed to connect to its 2x5 I/O header. The cable's connector is composed of two rows of five 0.1" spaced pins; it's also polarized, as is the mating connector on-board the Bus Pirate, so you can only connect the cable in one direction. T
In stock
+
Add to wish list

US$5.88
These are various leaded cables for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. Cables come in red/black pairs. Dimensions: 36" long.
In stock
+
Add to wish list

US$8.14

These are various leaded cables for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. High quality coax cable with stress relief sleeves. Dimensions: 36" long.

Delivery within 2-3 weeks
+
Add to wish list

US$20.93
The BNC probe kit includes a 20MHz professional probe with hook and tip as well as a couple converters to connect the probe to either a BNC jack, RCA jack, or a PCB mount. This kit was designed for use with our Digital Oscilloscope Kit, but there are sure to be a variety of other uses.
In stock
+
Add to wish list

US$7.81
These are various leaded cables for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. Dimensions: 36" Long.
In stock
+
Add to wish list

US$14.66
These are various leaded cables for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. 5 pairs of IC Hook to IC Hook test leads. Comes with Black, Red, Blue, Green, and Yellow colored leads.
In stock
+
Add to wish list

US$0.81

Plastic Banana Plugs with set screw connection and hole for interconnection.

In stock
+
Add to wish list

US$5.39

Dual solderless plug screw type banana plug-32mm X 57mm.

Delivery within 2-3 weeks
+
Add to wish list

US$0.29

Economy plastic banana plugs. Insulator unscrews for access to wire connection.

In stock
+
Add to wish list

US$9.96

Stackable Banana plug Test Lead set of one red and one black.

In stock
+
Add to wish list

US$1.18

These are fully insulated Banana Jacks to prevent electrical shock.

In stock
+
Add to wish list

US$1.18
These are fully insulated Banana Jacks to prevent electrical shock.    Order#  Color  XJ-B023-R  Red...
In stock
+
Add to wish list

US$1.18

These are fully insulated Banana Jacks to prevent electrical shock.

In stock
+
Add to wish list

US$1.18
These are fully insulated Banana Jacks to prevent electrical shock.
In stock
+
Add to wish list

US$1.18

These are fully insulated Banana Jacks to prevent electrical shock.

In stock
+
Add to wish list

US$1.95
They are machined from brass with a moveable multi-Lam contact cage spring for a tight fit. The connectors are nickel plated. Voltage: 50V Hands On, 600V Hands Free. Amps: 15A.
In stock
+
Add to wish list

US$1.95
They are machined from brass with a moveable multi-Lam contact cage spring for a tight fit. The connectors are nickel plated. Voltage: 50V Hands On, 600V Hands Free. Amps: 15A.
In stock
+
Add to wish list

US$1.95
They are machined from brass with a moveable multi-Lam contact cage spring for a tight fit. The connectors are nickel plated. Voltage: 50V Hands On, 600V Hands Free. Amps: 15A.
In stock
+
Add to wish list

US$1.95
They are machined from brass with a moveable multi-Lam contact cage spring for a tight fit. The connectors are nickel plated. Voltage: 50V Hands On, 600V Hands Free. Amps: 15A.
In stock
+
Add to wish list

US$1.95
They are machined from brass with a moveable multi-Lam contact cage spring for a tight fit. The connectors are nickel plated. Voltage: 50V Hands On, 600V Hands Free. Amps: 15A.
In stock
+
Add to wish list

US$5.91
These rugged stackable banana plug to banana plug Test Leads are ABRA's bestsellers. Come in different lengths of red, black, blue, green, white. Wire:18AWG. Voltage: 50V Hands On. 600V Hands Free. Amps: 15.
In stock
+
Add to wish list
1 2 3