W3231 Dual Display Digital Temperature Controller
This product is a digital thermometer panel meter. It's able to read and display temperatures between -50C to 99C at an input of 24V.
Specifications
- Temperature Control Range: -55°C~120°C/-67°F~ 248°F
- Temperature Control Accuracy: 0.1 °C / 0.1 °F
- Display Color: Red + Blue
- Working Power Supply: DC 24V
- Temperature Sensor: 1 meter cable NTC 10K Thermistor
- Product Size: 79.2mm×41.9mm×26.3mm
- Hole Size: 72.1mm×39.2mm
Operation guide
1. Short press “SET” small digital tube to flash, press “△” or “▽” to set the target temperature, press “Standby” button or no operation to save the setting within 3 seconds.
2. Press and hold “SET” to enter the code setting mode, press “△” or “▽” to switch the code. After selecting, press “SET” to enter the code setting. After setting, press “Standby” button or no operation to save the setting within 3 seconds.
3. The last parameter setting is saved by default after shutdown.
4, restore the factory settings: press and hold "SET" to power on.
5. When the module is powered on, it will start directly. After power-on, press and hold the “standby” button, the module will enter “sleep” or “wake up”; in case of power failure, the module will run automatically after power recovery, no need to start manually.
WARNING
